← Commit history
Publish 0.1.1
4 files changed
+406−11
lp2951g-s08-r-hero.glbadded⋯ 1 unchanged line ⋯
lp2951g-s08-r-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LP2951G-S08-R",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lp2951g-s08-r-etched.glb",+ "glb_sha256": "0cdfaebb85694dd073da0c3f299efdec40baa595f67c63f3cb1ae11d334fbfe1",+ "footprint": "lp2951g-s08-r.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "b61dbf16780d6a7e9426807ec31105a5286ecf31903dd4c03d0d129256abc478"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "OUTPUT",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "SENSE",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SHUTDOWN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "ERROR",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "5V TAP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "FEEDBACK",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "INPUT",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+138−4@@ -1,6 +1,6 @@ { "slug": "lp2951g-s08-r",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,140 @@ "docs/hero.png", "docs/lp2951g-s08-r-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lp2951g-s08-r-etched.step",+ "lp2951g-s08-r-hero.glb",+ "lp2951g-s08-r-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP2951G-S08-R",+ "manufacturer": "UTC Unisonic Tech",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "parts": {+ "symbol": "lp2951g-s08-r.kicad_sym",+ "footprint": "lp2951g-s08-r.kicad_mod",+ "model_3d": "lp2951g-s08-r-hero.glb",+ "model_3d_plain": "lp2951g-s08-r.glb",+ "model_3d_step": "lp2951g-s08-r-etched.step",+ "model_3d_step_plain": "lp2951g-s08-r.step",+ "lbr": "lp2951g-s08-r.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTPUT",+ "type": "power_out",+ "description": "Regulated voltage output, up to 100mA. Connect to Sense (pin 2) at the load for remote sensing, or tie directly to Sense at the pin for local regulation. Requires a minimum output capacitor (typ. 1μF) for stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output sense input for the internal error amplifier feedback path. Connect to VOUT at the load (Kelvin sense) to compensate for IR drops in the output trace; must be connected - typically tied to pin 1 for local sensing."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Active-high logic shutdown input, CMOS/TTL compatible. VIH ≥ 2.0V turns the regulator OFF; VIL ≤ 0.7V keeps it ON. Absolute max -0.3V to +30V; input current ~30μA at 2.4V, ~450μA at 30V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Typical ground current ~120μA at IL=100μA and ~12mA at IL=100mA."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Active-low, open-collector error flag output. Pulls low when the regulated output falls ~5% below nominal (out-of-regulation indicator). VOL ≤ 250mV at IOL = 400μA; leakage ≤ 1μA at VOH = 30V. Requires an external pull-up."+ },+ {+ "number": "6",+ "name": "5V TAP",+ "type": "output",+ "description": "Tap point on the internal feedback divider (182kΩ / 60kΩ) that produces the 1.235V reference-based 5V setpoint. Tie to FEEDBACK (pin 7) to use the internal divider for a fixed 5V output; leave open when programming a custom output voltage with external resistors on pin 7."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Error-amplifier feedback input, regulated to the internal 1.235V reference (VREF 1.22-1.25V). For a fixed 5V output tie to pin 6 (5V TAP); for a programmable output use an external divider VOUT = 1.23V × (1 + R1/R2). IFB typ 20nA. Absolute max -1.5V to +30V."+ },+ {+ "number": "8",+ "name": "INPUT",+ "type": "power_in",+ "description": "Unregulated DC supply input. Operating range up to 30V (absolute max -0.3V to +30V). Dropout voltage typ 50mV at IL=100μA and 380mV at IL=100mA."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C484525",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:05:48Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "lp2951g-s08-r.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp2951g-s08-r-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f9c0b9c4752df13808ec52f2061ed7785e7f5b44477352c9abc90ed8daa95e31",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+8−7@@ -1,6 +1,6 @@ { "slug": "lp2951g-s08-r",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,11 @@ "docs/lp2951g-s08-r-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lp2951g-s08-r-etched.step"+ "lp2951g-s08-r-etched.step",+ "lp2951g-s08-r-hero.glb",+ "lp2951g-s08-r-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -162,5 +162,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}