main
Ray Publish 0.1.1 29ea578
{
  "slug": "lp2951g-s08-r",
  "version": "0.1.1",
  "type": "component",
  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lp2951g-s08-r"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp2951g-s08-r.kicad_sym",
    "lp2951g-s08-r.kicad_mod",
    "lp2951g-s08-r.glb",
    "lp2951g-s08-r.step",
    "lp2951g-s08-r.lbr",
    "docs/hero.png",
    "docs/lp2951g-s08-r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp2951g-s08-r-etched.step",
    "lp2951g-s08-r-hero.glb",
    "lp2951g-s08-r-hero.overlay.json"
  ],
  "component": {
    "mpn": "LP2951G-S08-R",
    "manufacturer": "UTC Unisonic Tech",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "parts": {
      "symbol": "lp2951g-s08-r.kicad_sym",
      "footprint": "lp2951g-s08-r.kicad_mod",
      "model_3d": "lp2951g-s08-r-hero.glb",
      "model_3d_plain": "lp2951g-s08-r.glb",
      "model_3d_step": "lp2951g-s08-r-etched.step",
      "model_3d_step_plain": "lp2951g-s08-r.step",
      "lbr": "lp2951g-s08-r.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUTPUT",
        "type": "power_out",
        "description": "Regulated voltage output, up to 100mA. Connect to Sense (pin 2) at the load for remote sensing, or tie directly to Sense at the pin for local regulation. Requires a minimum output capacitor (typ. 1μF) for stability."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Output sense input for the internal error amplifier feedback path. Connect to VOUT at the load (Kelvin sense) to compensate for IR drops in the output trace; must be connected - typically tied to pin 1 for local sensing."
      },
      {
        "number": "3",
        "name": "SHUTDOWN",
        "type": "input",
        "description": "Active-high logic shutdown input, CMOS/TTL compatible. VIH ≥ 2.0V turns the regulator OFF; VIL ≤ 0.7V keeps it ON. Absolute max -0.3V to +30V; input current ~30μA at 2.4V, ~450μA at 30V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference. Typical ground current ~120μA at IL=100μA and ~12mA at IL=100mA."
      },
      {
        "number": "5",
        "name": "ERROR",
        "type": "output",
        "description": "Active-low, open-collector error flag output. Pulls low when the regulated output falls ~5% below nominal (out-of-regulation indicator). VOL ≤ 250mV at IOL = 400μA; leakage ≤ 1μA at VOH = 30V. Requires an external pull-up."
      },
      {
        "number": "6",
        "name": "5V TAP",
        "type": "output",
        "description": "Tap point on the internal feedback divider (182kΩ / 60kΩ) that produces the 1.235V reference-based 5V setpoint. Tie to FEEDBACK (pin 7) to use the internal divider for a fixed 5V output; leave open when programming a custom output voltage with external resistors on pin 7."
      },
      {
        "number": "7",
        "name": "FEEDBACK",
        "type": "input",
        "description": "Error-amplifier feedback input, regulated to the internal 1.235V reference (VREF 1.22-1.25V). For a fixed 5V output tie to pin 6 (5V TAP); for a programmable output use an external divider VOUT = 1.23V × (1 + R1/R2). IFB typ 20nA. Absolute max -1.5V to +30V."
      },
      {
        "number": "8",
        "name": "INPUT",
        "type": "power_in",
        "description": "Unregulated DC supply input. Operating range up to 30V (absolute max -0.3V to +30V). Dropout voltage typ 50mV at IL=100μA and 380mV at IL=100mA."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C484525",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:05:48Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lp2951g-s08-r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp2951g-s08-r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f9c0b9c4752df13808ec52f2061ed7785e7f5b44477352c9abc90ed8daa95e31",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}