main
Ray Publish 0.1.1 29d89dc
{
  "slug": "lp2951cmx-3-3",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments LP2951CMX 3 3 NOPB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lp2951cmx-3.3"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp2951cmx-3-3.kicad_sym",
    "lp2951cmx-3-3.kicad_mod",
    "lp2951cmx-3-3.glb",
    "lp2951cmx-3-3.step",
    "lp2951cmx-3-3.lbr",
    "docs/hero.png",
    "docs/lp2951cmx-3-3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp2951cmx-3-3-etched.step",
    "lp2951cmx-3-3-hero.glb",
    "lp2951cmx-3-3-hero.overlay.json"
  ],
  "component": {
    "mpn": "LP2951CMX-3.3",
    "manufacturer": "Texas Instruments LP2951CMX 3 3 NOPB",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp2951cmx-3.3.pdf",
    "parts": {
      "symbol": "lp2951cmx-3-3.kicad_sym",
      "footprint": "lp2951cmx-3-3.kicad_mod",
      "model_3d": "lp2951cmx-3-3-hero.glb",
      "model_3d_plain": "lp2951cmx-3-3.glb",
      "model_3d_step": "lp2951cmx-3-3-etched.step",
      "model_3d_step_plain": "lp2951cmx-3-3.step",
      "lbr": "lp2951cmx-3-3.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage (3.3 V nominal, ±0.5% or ±1% initial tolerance). Sources up to 100 mA. Requires a minimum 2.2 µF output capacitor with ESR in the range 10 mΩ-6 Ω for stability."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Output voltage sense input for the internal error amplifier. In fixed-output mode connect directly to the OUT pin (pin 1); in adjustable mode this pin ties to the top of the external feedback network to Kelvin-sense the load."
      },
      {
        "number": "3",
        "name": "SHUTDOWN",
        "type": "input",
        "description": "Active-high logic-controlled shutdown input. Drive high (>2 V) to disable the regulator (output off, quiescent current drops); drive low (<0.7 V) or leave tied to GND for normal operation. Withstands the full input supply voltage range (up to 30 V)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / negative supply reference. All voltages are referenced to this pin. On the WSON (NGT) package the die-attach pad (DAP) must be connected to GND at pin 4."
      },
      {
        "number": "5",
        "name": "ERROR",
        "type": "output",
        "description": "Open-collector error-flag output. Pulls low when the regulated output falls ~5% below its nominal value (e.g. due to input dropout or overload); high-impedance otherwise. Requires an external pull-up resistor to a logic supply. Commonly used to generate a power-on-reset signal."
      },
      {
        "number": "6",
        "name": "VTAP",
        "type": "output",
        "description": "Tap point of the internal output-programming resistor divider (nominally 1.235 V, the internal band-gap reference). In the fixed 3.3-V configuration this pin is tied to the FEEDBACK pin (pin 7) to select the on-chip 3.3-V setpoint. May also be used as a low-current reference output."
      },
      {
        "number": "7",
        "name": "FEEDBACK",
        "type": "input",
        "description": "Inverting input of the internal error amplifier (regulation setpoint = 1.235 V typ). For the fixed 3.3-V output, tie FEEDBACK to VTAP (pin 6). For adjustable operation, drive with the tap of an external R1/R2 divider from OUT to GND; Vout = 1.235 × (1 + R1/R2). Rated -1.5 V to +30 V."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply. Operating range 2.3 V to 30 V; must exceed VOUT + Vdropout (≈380 mV at 100 mA, 40 mV at light load). Requires a minimum 1 µF input capacitor near the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "LP2951CMX-3.3TR-ND",
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:05:46Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "LP2951CMX-3.3TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lp2951cmx-3-3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp2951cmx-3-3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "59c24fdc0237be3c84df4e6272e48879d4e2d25d210e15412db567f866aa4c39",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}