← Commit history
Publish 0.1.1
4 files changed
+406−11
lp2951cmx-3-3-hero.glbadded⋯ 1 unchanged line ⋯
lp2951cmx-3-3-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LP2951CMX-3.3",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lp2951cmx-3-3-etched.glb",+ "glb_sha256": "5ccfaf8cef40f1d00051d7251bda1780728871ac7fc83bcd9ddd506ae847aae1",+ "footprint": "lp2951cmx-3-3.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "acb21b7c48e23fd0dcc1d15e76b8b60399a56f473bcca543b5b497b4e40d95b2"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "OUT",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "SENSE",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SHUTDOWN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "ERROR",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "VTAP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "FEEDBACK",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "IN",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+138−4@@ -1,6 +1,6 @@ { "slug": "lp2951cmx-3-3",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments LP2951CMX 3 3 NOPB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,140 @@ "docs/hero.png", "docs/lp2951cmx-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lp2951cmx-3-3-etched.step",+ "lp2951cmx-3-3-hero.glb",+ "lp2951cmx-3-3-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP2951CMX-3.3",+ "manufacturer": "Texas Instruments LP2951CMX 3 3 NOPB",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lp2951cmx-3.3.pdf",+ "parts": {+ "symbol": "lp2951cmx-3-3.kicad_sym",+ "footprint": "lp2951cmx-3-3.kicad_mod",+ "model_3d": "lp2951cmx-3-3-hero.glb",+ "model_3d_plain": "lp2951cmx-3-3.glb",+ "model_3d_step": "lp2951cmx-3-3-etched.step",+ "model_3d_step_plain": "lp2951cmx-3-3.step",+ "lbr": "lp2951cmx-3-3.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage (3.3 V nominal, ±0.5% or ±1% initial tolerance). Sources up to 100 mA. Requires a minimum 2.2 µF output capacitor with ESR in the range 10 mΩ-6 Ω for stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output voltage sense input for the internal error amplifier. In fixed-output mode connect directly to the OUT pin (pin 1); in adjustable mode this pin ties to the top of the external feedback network to Kelvin-sense the load."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Active-high logic-controlled shutdown input. Drive high (>2 V) to disable the regulator (output off, quiescent current drops); drive low (<0.7 V) or leave tied to GND for normal operation. Withstands the full input supply voltage range (up to 30 V)."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / negative supply reference. All voltages are referenced to this pin. On the WSON (NGT) package the die-attach pad (DAP) must be connected to GND at pin 4."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Open-collector error-flag output. Pulls low when the regulated output falls ~5% below its nominal value (e.g. due to input dropout or overload); high-impedance otherwise. Requires an external pull-up resistor to a logic supply. Commonly used to generate a power-on-reset signal."+ },+ {+ "number": "6",+ "name": "VTAP",+ "type": "output",+ "description": "Tap point of the internal output-programming resistor divider (nominally 1.235 V, the internal band-gap reference). In the fixed 3.3-V configuration this pin is tied to the FEEDBACK pin (pin 7) to select the on-chip 3.3-V setpoint. May also be used as a low-current reference output."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Inverting input of the internal error amplifier (regulation setpoint = 1.235 V typ). For the fixed 3.3-V output, tie FEEDBACK to VTAP (pin 6). For adjustable operation, drive with the tap of an external R1/R2 divider from OUT to GND; Vout = 1.235 × (1 + R1/R2). Rated -1.5 V to +30 V."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input supply. Operating range 2.3 V to 30 V; must exceed VOUT + Vdropout (≈380 mV at 100 mA, 40 mV at light load). Requires a minimum 1 µF input capacitor near the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": "LP2951CMX-3.3TR-ND",+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:05:46Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "LP2951CMX-3.3TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "lp2951cmx-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp2951cmx-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "59c24fdc0237be3c84df4e6272e48879d4e2d25d210e15412db567f866aa4c39",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+8−7@@ -1,6 +1,6 @@ { "slug": "lp2951cmx-3-3",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments LP2951CMX 3 3 NOPB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,11 @@ "docs/lp2951cmx-3-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lp2951cmx-3-3-etched.step"+ "lp2951cmx-3-3-etched.step",+ "lp2951cmx-3-3-hero.glb",+ "lp2951cmx-3-3-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -162,5 +162,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}