main
Ray
lp103sb6f: laser-etched CAD + chip hero (factory 2.0.0 backfill)
7da0cea
LP103SB6F
LOWPOWER · USB Converters · SOT-23-6
LP103SB6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D+ | bidirectional | USB D+ data line input/output. Used for BC1.2 handshake and for driving the DCP/QC/SFCP/FCP protocol voltages (0.325V/0.6V/1V/2V/3V/3.3V) via internal switches and detectors. |
| 2 | GND | power_in | Device ground reference for all internal circuitry, analog and power return. |
| 3 | FBO | output | Feedback loop drive output. Connects to the reference/feedback input of the external power-supply error amplifier to set the VBUS output voltage. FBO sources current in ~2µA steps to program 5V/9V/12V/20V (QC2.0) or continuous mode with ±0.2V steps (QC3.0). Typical divider uses a fixed 100kΩ high-side resistor: VBUS = (100k/RLS + 1) x VFB. |
| 4 | QC_EN | input | High-Voltage Quick Charge enable. Drive low to disable HVQC (Qualcomm QC2.0/3.0) for high-current low-voltage applications. Drive high (or leave floating) to enable HVQC operation. Internally pulled high by a 2µA current source. VIH = VPS-1V, VIL = 1V max. |
| 5 | PS | power_in | Power Source pin for the internally generated supply. Fed from VBUS through a series resistor (~2.2kΩ recommended) so the internal shunt regulator sees <8mA; also requires a decoupling capacitor to GND. VPS operating range 3.1V to 6.3V (typ 4.3V), shunt clamp ~6.2V, UVLO threshold ~2.7V. |
| 6 | D- | bidirectional | USB D- data line input/output. Used for BC1.2 short-detect handshake and for driving/monitoring the DCP/QC/SFCP protocol voltages. Internal ~19.53kΩ pull-down (RDM(DWN)) is switched in during QC handshake. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | Interface |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
LP103SB6FLP103SB6FSOF
CAD (KiCad official)
- Symbol:
LP103SB6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp103sb6f-etched.step/lp103sb6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp103sb6f.step/lp103sb6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (9 pp, sha256
59508ad8558dfa87, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP103SB6F
**LOWPOWER** · USB Converters · SOT-23-6
LP103SB6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D+ | bidirectional | USB D+ data line input/output. Used for BC1.2 handshake and for driving the DCP/QC/SFCP/FCP protocol voltages (0.325V/0.6V/1V/2V/3V/3.3V) via internal switches and detectors. |
| 2 | GND | power_in | Device ground reference for all internal circuitry, analog and power return. |
| 3 | FBO | output | Feedback loop drive output. Connects to the reference/feedback input of the external power-supply error amplifier to set the VBUS output voltage. FBO sources current in ~2µA steps to program 5V/9V/12V/20V (QC2.0) or continuous mode with ±0.2V steps (QC3.0). Typical divider uses a fixed 100kΩ high-side resistor: VBUS = (100k/RLS + 1) x VFB. |
| 4 | QC_EN | input | High-Voltage Quick Charge enable. Drive low to disable HVQC (Qualcomm QC2.0/3.0) for high-current low-voltage applications. Drive high (or leave floating) to enable HVQC operation. Internally pulled high by a 2µA current source. VIH = VPS-1V, VIL = 1V max. |
| 5 | PS | power_in | Power Source pin for the internally generated supply. Fed from VBUS through a series resistor (~2.2kΩ recommended) so the internal shunt regulator sees <8mA; also requires a decoupling capacitor to GND. VPS operating range 3.1V to 6.3V (typ 4.3V), shunt clamp ~6.2V, UVLO threshold ~2.7V. |
| 6 | D- | bidirectional | USB D- data line input/output. Used for BC1.2 short-detect handshake and for driving/monitoring the DCP/QC/SFCP protocol voltages. Internal ~19.53kΩ pull-down (RDM(DWN)) is switched in during QC handshake. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | Interface |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `LP103SB6F`
- `LP103SB6FSOF`
## CAD (KiCad official)
- Symbol: `LP103SB6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lp103sb6f-etched.step` / `lp103sb6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp103sb6f.step` / `lp103sb6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp103sb6f-datasheet.pdf) (9 pp, sha256 `59508ad8558dfa87`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp103sb6f-datasheet.pdf)