main
Ray
ln1154b282mr-g: specified limits as data (metadata.characteristics, 21 rows from the datasheet)
06b0c67
LN1154B282MR-G
NATLINEAR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LN1154B282MR-G from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive supply input. Operating range 2.0 V to 7 V (absolute max VSS-0.3 V to VSS+8 V). A 2.2 µF or larger input capacitor (C1) between VIN and VSS is required for stability. |
| 2 | VSS | power_in | Ground / device negative reference. All voltages are referenced to VSS. |
| 3 | CE | input | Chip Enable. Active-high (B option): drive ≥1.6 V (VCEH) to enable the regulator, ≤0.5 V (VCEL) to shut it down. The 'B' suffix version has an internal pull-down resistor, so leaving CE floating disables the part. Absolute max VSS-0.3 V to VIN+0.3 V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to any potential; not internally bonded on the SOT-23-5 variant. |
| 5 | VOUT | power_out | Regulated output. Fixed 3.95 V (VOUT(S)×0.98 to ×1.02 for the ±2% grade indicated by the '...2' accuracy code). Delivers up to 300 mA with VIN ≥ VOUT+1 V. A 2.2 µF or larger output capacitor (C2) is required for stability. An internal bleed/discharge transistor pulls VOUT down when the part is disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
LN1154B282MR-GLN1154B282MR-GMLLN1154B282MR-GD
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2 | 7 | V | 5 | ||
| Output current | IOUT | 300 | mA | VIN≥VOUT(S)+1.0 V | 4 | ||
| Input stability | 0.1 | 0.2 | %/V | VOUT(S)+0.5 V ≤VIN≤7 V, IOUT=30 mA | 4 | ||
| Load stability | VOUT2 | 10 | 20 | mV | VIN=VOUT(S)+1.0 V, 1.0 mA ≤IOUT ≤100 mA | 4 | |
| Dropout voltage | Vdrop | 0.1 | 0.12 | V | IOUT=50 mA | 4 | |
| Dropout voltage | Vdrop | 0.18 | 0.22 | V | IOUT=100 mA | 4 | |
| Output voltage temperature coefficient | -100 | 100 | ppm/°C | VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤Ta ≤85°C | 4 | ||
| CE minimum high-level voltage | VCEH | 1.6 | V | 5 | |||
| CE maximum low-level voltage | VCEL | 0.5 | V | 5 | |||
| Input voltage absolute maximum | VIN | -0.3 | 8 | V | Referenced to VSS: VSS-0.3 to VSS+8 | 4 | |
| CE input voltage absolute maximum | VON/OFF | -0.3 | 0.3 | V | Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 | 4 | |
| Output voltage absolute maximum | VOUT | -0.3 | 0.3 | V | Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 | 4 | |
| Power dissipation | PD | 400 | mW | SOT-23-5 | 4 | ||
| Operating temperature | Topr | -40 | 85 | °C | 4 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 4 | ||
| Input capacitor | C1 | 2.2 | µF | Input capacitor C1, use conditions | 4 | ||
| Output capacitor | C2 | 2.2 | µF | Output capacitor C2, use conditions | 4 | ||
| Operating current | ISS1 | 60 | μA | VIN=VOUT(S)+1.0 V | 5 | ||
| Ripple rejection at 1 kHz | /PSRR/ | 60 | dB | VIN=VOUT(S)+1.0 V, f=1 kHz, Vrip=0.5 Vrms, IOUT=50 mA | 5 | ||
| Ripple rejection at 10 kHz | /PSRR/ | 50 | dB | VIN=VOUT(S)+1.0 V, f=10 kHz, Vrip=0.5 Vrms, IOUT=50 mA | 5 | ||
| Inrush current | Irush | 450 | mA | VIN=VOUT(T)+1V, CL=47uF, VCE=0→VOUT(T)+1V | 5 |
CAD (KiCad official)
- Symbol:
LN1154B282MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ln1154b282mr-g-etched.step/ln1154b282mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ln1154b282mr-g.step/ln1154b282mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NATLINEAR datasheet (None pp, sha256
144e00042d3b9baf, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LN1154B282MR-G
**NATLINEAR** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LN1154B282MR-G from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive supply input. Operating range 2.0 V to 7 V (absolute max VSS-0.3 V to VSS+8 V). A 2.2 µF or larger input capacitor (C1) between VIN and VSS is required for stability. |
| 2 | VSS | power_in | Ground / device negative reference. All voltages are referenced to VSS. |
| 3 | CE | input | Chip Enable. Active-high (B option): drive ≥1.6 V (VCEH) to enable the regulator, ≤0.5 V (VCEL) to shut it down. The 'B' suffix version has an internal pull-down resistor, so leaving CE floating disables the part. Absolute max VSS-0.3 V to VIN+0.3 V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to any potential; not internally bonded on the SOT-23-5 variant. |
| 5 | VOUT | power_out | Regulated output. Fixed 3.95 V (VOUT(S)×0.98 to ×1.02 for the ±2% grade indicated by the '...2' accuracy code). Delivers up to 300 mA with VIN ≥ VOUT+1 V. A 2.2 µF or larger output capacitor (C2) is required for stability. An internal bleed/discharge transistor pulls VOUT down when the part is disabled. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `LN1154B282MR-G`
- `LN1154B282MR-GML`
- `LN1154B282MR-GD`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2 | | 7 | V | | 5 |
| Output current | IOUT | 300 | | | mA | VIN≥VOUT(S)+1.0 V | 4 |
| Input stability | | | 0.1 | 0.2 | %/V | VOUT(S)+0.5 V ≤VIN≤7 V, IOUT=30 mA | 4 |
| Load stability | VOUT2 | | 10 | 20 | mV | VIN=VOUT(S)+1.0 V, 1.0 mA ≤IOUT ≤100 mA | 4 |
| Dropout voltage | Vdrop | | 0.1 | 0.12 | V | IOUT=50 mA | 4 |
| Dropout voltage | Vdrop | | 0.18 | 0.22 | V | IOUT=100 mA | 4 |
| Output voltage temperature coefficient | | -100 | | 100 | ppm/°C | VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤Ta ≤85°C | 4 |
| CE minimum high-level voltage | VCEH | 1.6 | | | V | | 5 |
| CE maximum low-level voltage | VCEL | | | 0.5 | V | | 5 |
| Input voltage absolute maximum | VIN | -0.3 | | 8 | V | Referenced to VSS: VSS-0.3 to VSS+8 | 4 |
| CE input voltage absolute maximum | VON/OFF | -0.3 | | 0.3 | V | Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 | 4 |
| Output voltage absolute maximum | VOUT | -0.3 | | 0.3 | V | Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 | 4 |
| Power dissipation | PD | | | 400 | mW | SOT-23-5 | 4 |
| Operating temperature | Topr | -40 | | 85 | °C | | 4 |
| Storage temperature | Tstg | -40 | | 125 | °C | | 4 |
| Input capacitor | C1 | 2.2 | | | µF | Input capacitor C1, use conditions | 4 |
| Output capacitor | C2 | 2.2 | | | µF | Output capacitor C2, use conditions | 4 |
| Operating current | ISS1 | | 60 | | μA | VIN=VOUT(S)+1.0 V | 5 |
| Ripple rejection at 1 kHz | /PSRR/ | | 60 | | dB | VIN=VOUT(S)+1.0 V, f=1 kHz, Vrip=0.5 Vrms, IOUT=50 mA | 5 |
| Ripple rejection at 10 kHz | /PSRR/ | | 50 | | dB | VIN=VOUT(S)+1.0 V, f=10 kHz, Vrip=0.5 Vrms, IOUT=50 mA | 5 |
| Inrush current | Irush | | 450 | | mA | VIN=VOUT(T)+1V, CL=47uF, VCE=0→VOUT(T)+1V | 5 |
## CAD (KiCad official)
- Symbol: `LN1154B282MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `ln1154b282mr-g-etched.step` / `ln1154b282mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ln1154b282mr-g.step` / `ln1154b282mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NATLINEAR datasheet](docs/ln1154b282mr-g-datasheet.pdf) (None pp, sha256 `144e00042d3b9baf`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ln1154b282mr-g-datasheet.pdf)