main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ln1154b282mr-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ln1154b282mr-g: viewers · Ray
ln1154b282mr-g-etched.fit.json ln1154b282mr-g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ln1154b282mr-g-etched.glb ln1154b282mr-g: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
ln1154b282mr-g-etched.step ln1154b282mr-g: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
ln1154b282mr-g-hero.glb Publish 0.1.1 · Ray
ln1154b282mr-g-hero.overlay.json Publish 0.1.1 · Ray
ln1154b282mr-g.glb Publish 0.1.0 · Ray
ln1154b282mr-g.kicad_mod Publish 0.1.0 · Ray
ln1154b282mr-g.kicad_sym Publish 0.1.0 · Ray
ln1154b282mr-g.lbr Publish 0.1.0 · Ray
ln1154b282mr-g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ln1154b282mr-g: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray

LN1154B282MR-G

NATLINEAR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

LN1154B282MR-G from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Positive supply input. Operating range 2.0 V to 7 V (absolute max VSS-0.3 V to VSS+8 V). A 2.2 µF or larger input capacitor (C1) between VIN and VSS is required for stability.
2 VSS power_in Ground / device negative reference. All voltages are referenced to VSS.
3 CE input Chip Enable. Active-high (B option): drive ≥1.6 V (VCEH) to enable the regulator, ≤0.5 V (VCEL) to shut it down. The 'B' suffix version has an internal pull-down resistor, so leaving CE floating disables the part. Absolute max VSS-0.3 V to VIN+0.3 V.
4 NC unconnected No connection. Leave floating or tie to any potential; not internally bonded on the SOT-23-5 variant.
5 VOUT power_out Regulated output. Fixed 3.95 V (VOUT(S)×0.98 to ×1.02 for the ±2% grade indicated by the '...2' accuracy code). Delivers up to 300 mA with VIN ≥ VOUT+1 V. A 2.2 µF or larger output capacitor (C2) is required for stability. An internal bleed/discharge transistor pulls VOUT down when the part is disabled.

Key specifications

Parameter Value
Manufacturer NATLINEAR
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

  • LN1154B282MR-G
  • LN1154B282MR-GML
  • LN1154B282MR-GD

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 2 7 V 5
Output current IOUT 300 mA VIN≥VOUT(S)+1.0 V 4
Input stability 0.1 0.2 %/V VOUT(S)+0.5 V ≤VIN≤7 V, IOUT=30 mA 4
Load stability VOUT2 10 20 mV VIN=VOUT(S)+1.0 V, 1.0 mA ≤IOUT ≤100 mA 4
Dropout voltage Vdrop 0.1 0.12 V IOUT=50 mA 4
Dropout voltage Vdrop 0.18 0.22 V IOUT=100 mA 4
Output voltage temperature coefficient -100 100 ppm/°C VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤Ta ≤85°C 4
CE minimum high-level voltage VCEH 1.6 V 5
CE maximum low-level voltage VCEL 0.5 V 5
Input voltage absolute maximum VIN -0.3 8 V Referenced to VSS: VSS-0.3 to VSS+8 4
CE input voltage absolute maximum VON/OFF -0.3 0.3 V Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 4
Output voltage absolute maximum VOUT -0.3 0.3 V Min referenced to VSS; max referenced to VIN: VSS-0.3 to VIN+0.3 4
Power dissipation PD 400 mW SOT-23-5 4
Operating temperature Topr -40 85 °C 4
Storage temperature Tstg -40 125 °C 4
Input capacitor C1 2.2 µF Input capacitor C1, use conditions 4
Output capacitor C2 2.2 µF Output capacitor C2, use conditions 4
Operating current ISS1 60 μA VIN=VOUT(S)+1.0 V 5
Ripple rejection at 1 kHz /PSRR/ 60 dB VIN=VOUT(S)+1.0 V, f=1 kHz, Vrip=0.5 Vrms, IOUT=50 mA 5
Ripple rejection at 10 kHz /PSRR/ 50 dB VIN=VOUT(S)+1.0 V, f=10 kHz, Vrip=0.5 Vrms, IOUT=50 mA 5
Inrush current Irush 450 mA VIN=VOUT(T)+1V, CL=47uF, VCE=0→VOUT(T)+1V 5

CAD (KiCad official)

  • Symbol: LN1154B282MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: ln1154b282mr-g-etched.step / ln1154b282mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ln1154b282mr-g.step / ln1154b282mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NATLINEAR datasheet (None pp, sha256 144e00042d3b9baf, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF