main
Ray
Publish 0.1.0
3c7b538
LMX2594RHAR
Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · VQFN-40-EP(6x6)
LMX2594RHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input; active HIGH powers on the device. |
| 2 | GND | power_in | VCO ground. |
| 3 | VbiasVCO | passive | VCO bias bypass; requires a 10-µF capacitor connected to VCO ground, placed close to the pin. |
| 4 | GND | power_in | VCO ground. |
| 5 | SYNC | input | Phase synchronization input with a programmable threshold. |
| 6 | GND | power_in | Digital ground. |
| 7 | VccDIG | power_in | Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground. |
| 8 | OSCinP | input | Reference clock input (+); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended). |
| 9 | OSCinM | input | Reference clock input (-); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended). |
| 10 | VregIN | passive | Input reference path regulator output; requires a 1-µF capacitor connected to ground, placed close to the pin. |
| 11 | VccCP | power_in | Charge pump supply; TI recommends bypassing with a decoupling capacitor to charge pump ground. |
| 12 | CPout | output | Charge pump output; TI recommends connecting C1 of the loop filter close to the pin. |
| 13 | GND | power_in | Charge pump ground. |
| 14 | GND | power_in | Digital ground. |
| 15 | VccMASH | power_in | Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground. |
| 16 | SCK | input | SPI clock; high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 17 | SDI | input | SPI data; high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 18 | RFoutBM | output | Differential output B (-); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output. |
| 19 | RFoutBP | output | Differential output B (+); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output. |
| 20 | MUXout | output | Multiplexed output for lock detect, readback, diagnostics, and ramp status. |
| 21 | VccBUF | power_in | Output buffer supply; TI recommends bypassing with a decoupling capacitor to RFout ground. |
| 22 | RFoutAM | output | Differential output A (-); requires a 50-Ω pullup to Vcc as close to the pin as possible. |
| 23 | RFoutAP | output | Differential output A (+); requires a 50-Ω pullup to Vcc as close to the pin as possible. |
| 24 | CSB | input | SPI latch (chip select bar); high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 25 | GND | power_in | VCO ground. |
| 26 | VccVCO2 | power_in | VCO supply; TI recommends bypassing with a decoupling capacitor to VCO ground. |
| 27 | VbiasVCO2 | passive | VCO bias bypass; requires a 1-µF capacitor connected to VCO ground. |
| 28 | SysRefReq | input | SYSREF request input for JESD204B support. |
| 29 | VrefVCO2 | passive | VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground. |
| 30 | RampClk | input | Ramping-mode input that clocks the ramp in manual ramping mode or acts as a trigger input. |
| 31 | GND | power_in | VCO ground. |
| 32 | RampDir | input | Ramping-mode input that changes ramp direction in manual ramping mode or acts as a trigger input. |
| 33 | VbiasVARAC | passive | VCO varactor bias bypass; requires a 10-µF capacitor connected to VCO ground. |
| 34 | GND | power_in | VCO ground. |
| 35 | Vtune | input | VCO tuning voltage input. |
| 36 | VrefVCO | passive | VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground. |
| 37 | VccVCO | power_in | VCO supply; TI recommends bypassing with a decoupling capacitor to ground. |
| 38 | VregVCO | passive | VCO regulator node bypass; requires a 1-µF capacitor connected to ground. |
| 39 | GND | power_in | VCO ground. |
| 40 | GND | power_in | VCO ground. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Clock and Timing |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 3.6 | V | 8 | ||
| Junction temperature | TJ | -40 | 150 | °C | 8 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Power supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | 8 | |
| Ambient temperature | TA | -40 | 25 | 85 | °C | 8 | |
| Junction temperature | TJ | 125 | °C | 8 | |||
| Supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | 9 | |
| High-level input voltage | VIH | 1.4 | V | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode); maximum printed as Vcc | 11 | ||
| Low-level input voltage | VIL | 0 | 0.4 | V | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 | |
| High-level input current | IIH | -25 | 25 | µA | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 | |
| Low-level input current | IIL | -25 | 25 | µA | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 | |
| Low-level output voltage | VOL | 0.4 | V | Load current = 10 mA | 11 | ||
| Input reference frequency | fOSCin | 5 | 1400 | MHz | OSC_2X = 0 | 9 | |
| Input reference frequency | fOSCin | 5 | 200 | MHz | OSC_2X = 1 | 9 | |
| Reference input voltage | vOSCin | 0.2 | 2 | Vpp | AC-coupled required | 9 | |
| Multiplier frequency (input range) | fMULT | 30 | 70 | MHz | Input range; only applies when multiplier is enabled | 9 | |
| Multiplier frequency (output range) | fMULT | 180 | 250 | MHz | Output range; only applies when multiplier is enabled | 9 | |
| Phase detector frequency (integer mode) | fPD | 0.125 | 400 | MHz | Integer mode, MASH_ORDER = 0 | 9 | |
| Phase detector frequency (fractional mode) | fPD | 5 | 300 | MHz | Fractional mode, MASH_ORDER = 1, 2, 3 | 9 | |
| Phase detector frequency (fractional mode, 4th order) | fPD | 5 | 240 | MHz | Fractional mode, MASH_ORDER = 4 | 9 | |
| Single-ended output power (50-Ω resistor pullup) | pOUT | 5 | dBm | 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 8 GHz | 9 | ||
| Single-ended output power (50-Ω resistor pullup) | pOUT | 2 | dBm | 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 15 GHz | 9 | ||
| Single-ended output power (1-nH inductor pullup) | pOUT | 10 | dBm | 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 8 GHz | 9 | ||
| Single-ended output power (1-nH inductor pullup) | pOUT | 7 | dBm | 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 15 GHz | 9 | ||
| Isolation between outputs A and B | Xtalk | -50 | dBc | Measured on output A; OUTA_MUX = VCO, OUTB_MUX = channel divider | 9 | ||
| Second harmonic | H2 | -20 | dBc | OUTA_MUX = VCO, fVCO = 8 GHz | 9 | ||
| Second harmonic | H2 | -30 | dBc | OUTA_MUX = VCO, fVCO = 11 GHz | 9 | ||
| Third harmonic | H3 | -50 | dBc | OUTA_MUX = VCO, fVCO = 8 GHz | 9 | ||
| VCO second harmonic | H2 | -20 | dBc | fVCO = 8 GHz, divider disabled | 11 | ||
| VCO third harmonic | H3 | -50 | dBc | fVCO = 8 GHz, divider disabled | 11 | ||
| Charge-pump leakage current | ICPout | 15 | nA | CPG = 0 | 9 | ||
| Effective charge pump current (sum of up and down) | 3 | mA | CPG = 4 | 9 | |||
| Effective charge pump current (sum of up and down) | 6 | mA | CPG = 1 | 9 | |||
| Effective charge pump current (sum of up and down) | 9 | mA | CPG = 5 | 9 | |||
| Effective charge pump current (sum of up and down) | 12 | mA | CPG = 3 | 9 | |||
| Effective charge pump current (sum of up and down) | 15 | mA | CPG = 7 | 9 | |||
| Normalized PLL 1/f noise | PNPLL_1/f | -129 | dBc/Hz | fPD = 100 MHz, fVCO = 12 GHz | 9 | ||
| Normalized PLL noise floor | PNPLL_flat | -236 | dBc/Hz | 9 | |||
| Supply current | ICC | 340 | mA | OUTA_PD = 0, OUTB_PD = 1, OUTA_MUX = OUTB_MUX = 1, OUTA_PWR = 31, CPG=7, fOSC = fPD = 100 MHz, fVCO = fOUT = 14 GHz, pOUT = 3 dBm with 50-Ω resistor pullup | 9 | ||
| Power-on reset current | 170 | mA | RESET=1 | 9 | |||
| Power-down current | 5 | mA | POWERDOWN=1 | 9 | |||
| VCO calibration speed (no assist) | tVCOCAL | 50 | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; No assist | 10 | ||
| VCO calibration speed (partial assist) | tVCOCAL | 35 | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Partial assist | 10 | ||
| VCO calibration speed (close frequency) | tVCOCAL | 20 | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Close frequency | 10 | ||
| VCO calibration speed (full assist) | tVCOCAL | 5 | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Full assist | 10 | ||
| Junction-to-ambient thermal resistance | RθJA | 30.5 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 15.3 | °C/W | 8 | |||
| Junction-to-board thermal resistance | RθJB | 5.4 | °C/W | 8 | |||
| Junction-to-top characterization parameter | ψJT | 0.2 | °C/W | 8 | |||
| Junction-to-board characterization parameter | ψJB | 5.3 | °C/W | 8 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.9 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
LMX2594RHAR - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
lmx2594rhar-etched.step/lmx2594rhar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmx2594rhar.step/lmx2594rhar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (77 pp, sha256
a27cb55ae425fc3e, retrieved 2026-10-30, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMX2594RHAR
**Texas Instruments** · Clock Generators / Frequency Synthesizers / PLL · VQFN-40-EP(6x6)
LMX2594RHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input; active HIGH powers on the device. |
| 2 | GND | power_in | VCO ground. |
| 3 | VbiasVCO | passive | VCO bias bypass; requires a 10-µF capacitor connected to VCO ground, placed close to the pin. |
| 4 | GND | power_in | VCO ground. |
| 5 | SYNC | input | Phase synchronization input with a programmable threshold. |
| 6 | GND | power_in | Digital ground. |
| 7 | VccDIG | power_in | Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground. |
| 8 | OSCinP | input | Reference clock input (+); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended). |
| 9 | OSCinM | input | Reference clock input (-); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended). |
| 10 | VregIN | passive | Input reference path regulator output; requires a 1-µF capacitor connected to ground, placed close to the pin. |
| 11 | VccCP | power_in | Charge pump supply; TI recommends bypassing with a decoupling capacitor to charge pump ground. |
| 12 | CPout | output | Charge pump output; TI recommends connecting C1 of the loop filter close to the pin. |
| 13 | GND | power_in | Charge pump ground. |
| 14 | GND | power_in | Digital ground. |
| 15 | VccMASH | power_in | Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground. |
| 16 | SCK | input | SPI clock; high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 17 | SDI | input | SPI data; high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 18 | RFoutBM | output | Differential output B (-); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output. |
| 19 | RFoutBP | output | Differential output B (+); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output. |
| 20 | MUXout | output | Multiplexed output for lock detect, readback, diagnostics, and ramp status. |
| 21 | VccBUF | power_in | Output buffer supply; TI recommends bypassing with a decoupling capacitor to RFout ground. |
| 22 | RFoutAM | output | Differential output A (-); requires a 50-Ω pullup to Vcc as close to the pin as possible. |
| 23 | RFoutAP | output | Differential output A (+); requires a 50-Ω pullup to Vcc as close to the pin as possible. |
| 24 | CSB | input | SPI latch (chip select bar); high-impedance CMOS input with 1.8-V to 3.3-V logic. |
| 25 | GND | power_in | VCO ground. |
| 26 | VccVCO2 | power_in | VCO supply; TI recommends bypassing with a decoupling capacitor to VCO ground. |
| 27 | VbiasVCO2 | passive | VCO bias bypass; requires a 1-µF capacitor connected to VCO ground. |
| 28 | SysRefReq | input | SYSREF request input for JESD204B support. |
| 29 | VrefVCO2 | passive | VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground. |
| 30 | RampClk | input | Ramping-mode input that clocks the ramp in manual ramping mode or acts as a trigger input. |
| 31 | GND | power_in | VCO ground. |
| 32 | RampDir | input | Ramping-mode input that changes ramp direction in manual ramping mode or acts as a trigger input. |
| 33 | VbiasVARAC | passive | VCO varactor bias bypass; requires a 10-µF capacitor connected to VCO ground. |
| 34 | GND | power_in | VCO ground. |
| 35 | Vtune | input | VCO tuning voltage input. |
| 36 | VrefVCO | passive | VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground. |
| 37 | VccVCO | power_in | VCO supply; TI recommends bypassing with a decoupling capacitor to ground. |
| 38 | VregVCO | passive | VCO regulator node bypass; requires a 1-µF capacitor connected to ground. |
| 39 | GND | power_in | VCO ground. |
| 40 | GND | power_in | VCO ground. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Clock and Timing |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | | 3.6 | V | | 8 |
| Junction temperature | TJ | -40 | | 150 | °C | | 8 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 8 |
| Power supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | | 8 |
| Ambient temperature | TA | -40 | 25 | 85 | °C | | 8 |
| Junction temperature | TJ | | | 125 | °C | | 8 |
| Supply voltage | VCC | 3.15 | 3.3 | 3.45 | V | | 9 |
| High-level input voltage | VIH | 1.4 | | | V | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode); maximum printed as Vcc | 11 |
| Low-level input voltage | VIL | 0 | | 0.4 | V | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 |
| High-level input current | IIH | -25 | | 25 | µA | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 |
| Low-level input current | IIL | -25 | | 25 | µA | Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) | 11 |
| Low-level output voltage | VOL | | | 0.4 | V | Load current = 10 mA | 11 |
| Input reference frequency | fOSCin | 5 | | 1400 | MHz | OSC_2X = 0 | 9 |
| Input reference frequency | fOSCin | 5 | | 200 | MHz | OSC_2X = 1 | 9 |
| Reference input voltage | vOSCin | 0.2 | | 2 | Vpp | AC-coupled required | 9 |
| Multiplier frequency (input range) | fMULT | 30 | | 70 | MHz | Input range; only applies when multiplier is enabled | 9 |
| Multiplier frequency (output range) | fMULT | 180 | | 250 | MHz | Output range; only applies when multiplier is enabled | 9 |
| Phase detector frequency (integer mode) | fPD | 0.125 | | 400 | MHz | Integer mode, MASH_ORDER = 0 | 9 |
| Phase detector frequency (fractional mode) | fPD | 5 | | 300 | MHz | Fractional mode, MASH_ORDER = 1, 2, 3 | 9 |
| Phase detector frequency (fractional mode, 4th order) | fPD | 5 | | 240 | MHz | Fractional mode, MASH_ORDER = 4 | 9 |
| Single-ended output power (50-Ω resistor pullup) | pOUT | | 5 | | dBm | 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 8 GHz | 9 |
| Single-ended output power (50-Ω resistor pullup) | pOUT | | 2 | | dBm | 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 15 GHz | 9 |
| Single-ended output power (1-nH inductor pullup) | pOUT | | 10 | | dBm | 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 8 GHz | 9 |
| Single-ended output power (1-nH inductor pullup) | pOUT | | 7 | | dBm | 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 15 GHz | 9 |
| Isolation between outputs A and B | Xtalk | | -50 | | dBc | Measured on output A; OUTA_MUX = VCO, OUTB_MUX = channel divider | 9 |
| Second harmonic | H2 | | -20 | | dBc | OUTA_MUX = VCO, fVCO = 8 GHz | 9 |
| Second harmonic | H2 | | -30 | | dBc | OUTA_MUX = VCO, fVCO = 11 GHz | 9 |
| Third harmonic | H3 | | -50 | | dBc | OUTA_MUX = VCO, fVCO = 8 GHz | 9 |
| VCO second harmonic | H2 | | -20 | | dBc | fVCO = 8 GHz, divider disabled | 11 |
| VCO third harmonic | H3 | | -50 | | dBc | fVCO = 8 GHz, divider disabled | 11 |
| Charge-pump leakage current | ICPout | | 15 | | nA | CPG = 0 | 9 |
| Effective charge pump current (sum of up and down) | | | 3 | | mA | CPG = 4 | 9 |
| Effective charge pump current (sum of up and down) | | | 6 | | mA | CPG = 1 | 9 |
| Effective charge pump current (sum of up and down) | | | 9 | | mA | CPG = 5 | 9 |
| Effective charge pump current (sum of up and down) | | | 12 | | mA | CPG = 3 | 9 |
| Effective charge pump current (sum of up and down) | | | 15 | | mA | CPG = 7 | 9 |
| Normalized PLL 1/f noise | PNPLL_1/f | | -129 | | dBc/Hz | fPD = 100 MHz, fVCO = 12 GHz | 9 |
| Normalized PLL noise floor | PNPLL_flat | | -236 | | dBc/Hz | | 9 |
| Supply current | ICC | | 340 | | mA | OUTA_PD = 0, OUTB_PD = 1, OUTA_MUX = OUTB_MUX = 1, OUTA_PWR = 31, CPG=7, fOSC = fPD = 100 MHz, fVCO = fOUT = 14 GHz, pOUT = 3 dBm with 50-Ω resistor pullup | 9 |
| Power-on reset current | | | 170 | | mA | RESET=1 | 9 |
| Power-down current | | | 5 | | mA | POWERDOWN=1 | 9 |
| VCO calibration speed (no assist) | tVCOCAL | | 50 | | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; No assist | 10 |
| VCO calibration speed (partial assist) | tVCOCAL | | 35 | | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Partial assist | 10 |
| VCO calibration speed (close frequency) | tVCOCAL | | 20 | | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Close frequency | 10 |
| VCO calibration speed (full assist) | tVCOCAL | | 5 | | µs | Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Full assist | 10 |
| Junction-to-ambient thermal resistance | RθJA | | 30.5 | | °C/W | | 8 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 15.3 | | °C/W | | 8 |
| Junction-to-board thermal resistance | RθJB | | 5.4 | | °C/W | | 8 |
| Junction-to-top characterization parameter | ψJT | | 0.2 | | °C/W | | 8 |
| Junction-to-board characterization parameter | ψJB | | 5.3 | | °C/W | | 8 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 0.9 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `LMX2594RHAR`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `lmx2594rhar-etched.step` / `lmx2594rhar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmx2594rhar.step` / `lmx2594rhar.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmx2594rhar.pdf) (77 pp, sha256 `a27cb55ae425fc3e`, retrieved 2026-10-30, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmx2594rhar-datasheet.pdf)