main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmx2594rhar: hero re-rendered with the chip (after the 10-30 render outage) · Ray
viewers lmx2594rhar: viewers · Ray
lmx2594rhar-etched.glb Publish 0.1.0 · Ray
lmx2594rhar-etched.step lmx2594rhar: factory component page (tier=mfr) · Ray
lmx2594rhar-hero.glb lmx2594rhar: hero GLB from the etched model (keeps the MPN mark) · Ray
lmx2594rhar-hero.overlay.json Publish 0.1.0 · Ray
lmx2594rhar.glb Publish 0.1.0 · Ray
lmx2594rhar.kicad_mod Publish 0.1.0 · Ray
lmx2594rhar.kicad_sym Publish 0.1.0 · Ray
lmx2594rhar.lbr Publish 0.1.0 · Ray
lmx2594rhar.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 41 pins · Ray

LMX2594RHAR

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · VQFN-40-EP(6x6)

LMX2594RHAR from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE input Chip enable input; active HIGH powers on the device.
2 GND power_in VCO ground.
3 VbiasVCO passive VCO bias bypass; requires a 10-µF capacitor connected to VCO ground, placed close to the pin.
4 GND power_in VCO ground.
5 SYNC input Phase synchronization input with a programmable threshold.
6 GND power_in Digital ground.
7 VccDIG power_in Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground.
8 OSCinP input Reference clock input (+); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended).
9 OSCinM input Reference clock input (-); high-impedance self-biasing pin that requires AC coupling (0.1 µF recommended).
10 VregIN passive Input reference path regulator output; requires a 1-µF capacitor connected to ground, placed close to the pin.
11 VccCP power_in Charge pump supply; TI recommends bypassing with a decoupling capacitor to charge pump ground.
12 CPout output Charge pump output; TI recommends connecting C1 of the loop filter close to the pin.
13 GND power_in Charge pump ground.
14 GND power_in Digital ground.
15 VccMASH power_in Digital supply; TI recommends bypassing with a decoupling capacitor to digital ground.
16 SCK input SPI clock; high-impedance CMOS input with 1.8-V to 3.3-V logic.
17 SDI input SPI data; high-impedance CMOS input with 1.8-V to 3.3-V logic.
18 RFoutBM output Differential output B (-); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output.
19 RFoutBP output Differential output B (+); requires a pullup (typically 50 Ω) to Vcc as close to the pin as possible; can be used as an output signal or SYSREF output.
20 MUXout output Multiplexed output for lock detect, readback, diagnostics, and ramp status.
21 VccBUF power_in Output buffer supply; TI recommends bypassing with a decoupling capacitor to RFout ground.
22 RFoutAM output Differential output A (-); requires a 50-Ω pullup to Vcc as close to the pin as possible.
23 RFoutAP output Differential output A (+); requires a 50-Ω pullup to Vcc as close to the pin as possible.
24 CSB input SPI latch (chip select bar); high-impedance CMOS input with 1.8-V to 3.3-V logic.
25 GND power_in VCO ground.
26 VccVCO2 power_in VCO supply; TI recommends bypassing with a decoupling capacitor to VCO ground.
27 VbiasVCO2 passive VCO bias bypass; requires a 1-µF capacitor connected to VCO ground.
28 SysRefReq input SYSREF request input for JESD204B support.
29 VrefVCO2 passive VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground.
30 RampClk input Ramping-mode input that clocks the ramp in manual ramping mode or acts as a trigger input.
31 GND power_in VCO ground.
32 RampDir input Ramping-mode input that changes ramp direction in manual ramping mode or acts as a trigger input.
33 VbiasVARAC passive VCO varactor bias bypass; requires a 10-µF capacitor connected to VCO ground.
34 GND power_in VCO ground.
35 Vtune input VCO tuning voltage input.
36 VrefVCO passive VCO supply reference bypass; requires a 10-µF capacitor connected to VCO ground.
37 VccVCO power_in VCO supply; TI recommends bypassing with a decoupling capacitor to ground.
38 VregVCO passive VCO regulator node bypass; requires a 1-µF capacitor connected to ground.
39 GND power_in VCO ground.
40 GND power_in VCO ground.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40-EP(6x6)
Category Clock and Timing
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.3 3.6 V 8
Junction temperature TJ -40 150 °C 8
Storage temperature Tstg -65 150 °C 8
Power supply voltage VCC 3.15 3.3 3.45 V 8
Ambient temperature TA -40 25 85 °C 8
Junction temperature TJ 125 °C 8
Supply voltage VCC 3.15 3.3 3.45 V 9
High-level input voltage VIH 1.4 V Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode); maximum printed as Vcc 11
Low-level input voltage VIL 0 0.4 V Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) 11
High-level input current IIH -25 25 µA Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) 11
Low-level input current IIL -25 25 µA Applies to SLK, SDI, CSB, CE, RampDir, RampClk, MUXout, SYNC (CMOS Mode), SysRefReq (CMOS Mode) 11
Low-level output voltage VOL 0.4 V Load current = 10 mA 11
Input reference frequency fOSCin 5 1400 MHz OSC_2X = 0 9
Input reference frequency fOSCin 5 200 MHz OSC_2X = 1 9
Reference input voltage vOSCin 0.2 2 Vpp AC-coupled required 9
Multiplier frequency (input range) fMULT 30 70 MHz Input range; only applies when multiplier is enabled 9
Multiplier frequency (output range) fMULT 180 250 MHz Output range; only applies when multiplier is enabled 9
Phase detector frequency (integer mode) fPD 0.125 400 MHz Integer mode, MASH_ORDER = 0 9
Phase detector frequency (fractional mode) fPD 5 300 MHz Fractional mode, MASH_ORDER = 1, 2, 3 9
Phase detector frequency (fractional mode, 4th order) fPD 5 240 MHz Fractional mode, MASH_ORDER = 4 9
Single-ended output power (50-Ω resistor pullup) pOUT 5 dBm 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 8 GHz 9
Single-ended output power (50-Ω resistor pullup) pOUT 2 dBm 50-Ω resistor pullup, OUTx_PWR = 50, fOUT = 15 GHz 9
Single-ended output power (1-nH inductor pullup) pOUT 10 dBm 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 8 GHz 9
Single-ended output power (1-nH inductor pullup) pOUT 7 dBm 1-nH inductor pullup, OUTx_PWR = 50, fOUT = 15 GHz 9
Isolation between outputs A and B Xtalk -50 dBc Measured on output A; OUTA_MUX = VCO, OUTB_MUX = channel divider 9
Second harmonic H2 -20 dBc OUTA_MUX = VCO, fVCO = 8 GHz 9
Second harmonic H2 -30 dBc OUTA_MUX = VCO, fVCO = 11 GHz 9
Third harmonic H3 -50 dBc OUTA_MUX = VCO, fVCO = 8 GHz 9
VCO second harmonic H2 -20 dBc fVCO = 8 GHz, divider disabled 11
VCO third harmonic H3 -50 dBc fVCO = 8 GHz, divider disabled 11
Charge-pump leakage current ICPout 15 nA CPG = 0 9
Effective charge pump current (sum of up and down) 3 mA CPG = 4 9
Effective charge pump current (sum of up and down) 6 mA CPG = 1 9
Effective charge pump current (sum of up and down) 9 mA CPG = 5 9
Effective charge pump current (sum of up and down) 12 mA CPG = 3 9
Effective charge pump current (sum of up and down) 15 mA CPG = 7 9
Normalized PLL 1/f noise PNPLL_1/f -129 dBc/Hz fPD = 100 MHz, fVCO = 12 GHz 9
Normalized PLL noise floor PNPLL_flat -236 dBc/Hz 9
Supply current ICC 340 mA OUTA_PD = 0, OUTB_PD = 1, OUTA_MUX = OUTB_MUX = 1, OUTA_PWR = 31, CPG=7, fOSC = fPD = 100 MHz, fVCO = fOUT = 14 GHz, pOUT = 3 dBm with 50-Ω resistor pullup 9
Power-on reset current 170 mA RESET=1 9
Power-down current 5 mA POWERDOWN=1 9
VCO calibration speed (no assist) tVCOCAL 50 µs Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; No assist 10
VCO calibration speed (partial assist) tVCOCAL 35 µs Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Partial assist 10
VCO calibration speed (close frequency) tVCOCAL 20 µs Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Close frequency 10
VCO calibration speed (full assist) tVCOCAL 5 µs Switch across the entire frequency band; fOSC = 200 MHz, fPD = 100 MHz; Full assist 10
Junction-to-ambient thermal resistance RθJA 30.5 °C/W 8
Junction-to-case (top) thermal resistance RθJC(top) 15.3 °C/W 8
Junction-to-board thermal resistance RθJB 5.4 °C/W 8
Junction-to-top characterization parameter ψJT 0.2 °C/W 8
Junction-to-board characterization parameter ψJB 5.3 °C/W 8
Junction-to-case (bottom) thermal resistance RθJC(bot) 0.9 °C/W 8

CAD (KiCad official)

  • Symbol: LMX2594RHAR
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: lmx2594rhar-etched.step / lmx2594rhar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmx2594rhar.step / lmx2594rhar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (77 pp, sha256 a27cb55ae425fc3e, retrieved 2026-10-30, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF