main
History Download
Ray Publish 0.1.0 24f22a0

LMX2522LQ1635

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · WQFN-28(5x5)

LMX2522LQ1635 from Texas Instruments, in a WQFN-28(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CPout output IF PLL charge pump output, used with the external IF VCO and loop filter; IF charge pump current is programmable at 100, 200, 300 or 800 µA.
2 NC unconnected Do not connect to any node on printed circuit board.
3 NC unconnected Do not connect to any node on printed circuit board.
4 VDD power_in Supply voltage for IF analog circuitry; VCC and VDD are specified at 2.7 V to 3.3 V.
5 LE input MICROWIRE Latch Enable; data in the shift register is loaded into the addressed control register on the LOW-to-HIGH transition of LE.
6 CLK input MICROWIRE Clock; serial DATA is clocked into the 24-bit shift register on the rising edge of CLK.
7 DATA input MICROWIRE Data input; data is loaded into the 24-bit shift register from MSB to LSB.
8 VDD power_in Supply voltage for VCOs; VCC and VDD are specified at 2.7 V to 3.3 V.
9 NC unconnected Do not connect to any node on printed circuit board.
10 NC unconnected Do not connect to any node on printed circuit board.
11 NC unconnected Do not connect to any node on printed circuit board.
12 NC unconnected Do not connect to any node on printed circuit board.
13 VDD power_in Supply voltage for VCOs; VCC and VDD are specified at 2.7 V to 3.3 V.
14 VDD power_in Supply voltage for VCOs output buffer; VCC and VDD are specified at 2.7 V to 3.3 V.
15 RFout output Buffered VCO output; output power is set by the OB_CRL[1:0] control bits from -9 dBm (minimum) to 4 dBm (maximum).
16 VCC power_in Supply voltage for RF prescaler; VCC and VDD are specified at 2.7 V to 3.3 V.
17 VCC power_in Supply voltage for charge pump; VCC and VDD are specified at 2.7 V to 3.3 V.
18 VCC power_in Supply voltage for RF digital circuitry; VCC and VDD are specified at 2.7 V to 3.3 V.
19 LD output Lock Detect output for the RF PLL; it is HIGH when locked and LOW when not locked, and is held at GND when disabled through the RF_LD bit.
20 CE input Chip Enable control pin; taking CE LOW powers the device down regardless of register values.
21 GND power_in Ground for digital circuitry.
22 OSCin input Reference frequency input; 19.20 MHz and 19.68 MHz are supported, with reference oscillator input sensitivity listed as 0.2 VCC Vp-p.
23 VCC power_in Supply voltage for reference input buffer; VCC and VDD are specified at 2.7 V to 3.3 V.
24 GND power_in Ground for digital circuitry.
25 VCC power_in Supply voltage for IF digital circuitry; VCC and VDD are specified at 2.7 V to 3.3 V.
26 Fin input IF buffer/prescaler input; IF input sensitivity is -10 dBm to 0 dBm.
27 VCC power_in Supply voltage for IF buffer/prescaler; VCC and VDD are specified at 2.7 V to 3.3 V.
28 NC unconnected Do not connect to any node on printed circuit board.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-28(5x5)
Category RTC/Clock Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Temperature TA -30 25 85 °C 4
Supply Voltage (to VCC, VDD GND) VCC, VDD 2.7 3.3 V 4
Supply Voltage VCC, VDD -0.3 3.6 V 4
Voltage on any pin VI to VDD VI -0.3 V to VDD (printed upper limit VDD+0.3 V) 4
Voltage on any pin VI to GND VI -0.3 V to GND (printed upper limit VCC+0.3 V) 4
Storage Temperature Range TSTG -65 150 °C 4
ICC + IDD Total Supply Current ICC + IDD 17 19 mA OB_CRL [1:0] = 00 4
(ICC + IDD)RF RF PLL Total Supply Current (ICC + IDD)RF 16 18 mA OB_CRL [1:0] = 00 4
Power Down Current IPD 20 µA CE = Low or RF_EN = 0, IF_EN = 0 4
Reference Oscillator Input Frequency fOSCin 19.2 19.68 MHz 19.20 MHz and 19.68 MHz are supported 4
Reference Oscillator Input sensitivity VOSCin 0.2 VP-P printed upper limit 0.2 VCC 4
Frequency Range RF VCO fRFout 1619.62 1649.62 MHz LMX2522LQ1635 RF VCO 5
RF Output Power pRFout -2 1 4 dBm OB_CRL [1:0] = 11 5
RF Output Power pRFout -5 -2 1 dBm OB_CRL [1:0] = 10 5
RF Output Power pRFout -7 -4 -1 dBm OB_CRL [1:0] = 01 5
RF Output Power pRFout -9 -6 -3 dBm OB_CRL [1:0] = 00 5
Lock Time RF PLL 500 800 µs LMX2522LQ1635 30 MHz Band for RF PLL 5
Reference Spurs RF PLL -75 dBc 5
RMS Phase Error 1.3 degrees RF PLL in all band 5
L(f) Phase Noise L(f) -113 -112 dBc/Hz LMX2522LQ1635 @100 kHz offset 5
L(f) Phase Noise L(f) -138 -136 dBc/Hz LMX2522LQ1635 @1.25 MHz offset 5
2nd Harmonic Suppression -25 dBc RF VCO 5
3rd Harmonic Suppression -20 dBc RF VCO 5
Output Power GPS VCO pRFout -2 1 4 dBm OB_CRL [1:0] = 11 5
Output Power GPS VCO pRFout -5 -2 1 dBm OB_CRL [1:0] = 10 5
Output Power GPS VCO pRFout -7 -4 -1 dBm OB_CRL [1:0] = 01 5
Output Power GPS VCO pRFout -9 -6 -3 dBm OB_CRL [1:0] = 00 5
Lock Time From RF to GPS PLL 600 800 µs 5
Reference Spurs GPS VCO -75 dBc 5
RMS Phase Error (GPS section) 1.3 degrees RF PLL in all band 5
L(f) Phase Noise GPS VCO L(f) -113 -112 dBc/Hz @100 kHz offset 5
L(f) Phase Noise GPS VCO L(f) -138 -136 dBc/Hz @1.25 MHz offset 5
2nd Harmonic Suppression GPS VCO -25 dBc 5
3rd Harmonic Suppression GPS VCO -20 dBc 5
IF Input Sensitivity pFin -10 0 dBm 6
High-Level Input Current IIH -10 10 µA 6
Low-Level Input Current IIL -10 10 µA 6
Low-Level Input Voltage VIL 0 V printed upper limit 0.2 VDD (or 0.2 VCC) 6
Data to Clock Set Up Time tCS 50 ns 6
Data to Clock Hold Time tCH 10 ns 6
Clock Pulse Width High tCWH 50 ns 6
Clock Pulse Width Low tCWL 50 ns 6
Clock to Latch Enable Set Up Time tES 50 ns 6
Latch Enable Pulse Width tEW 50 ns 6
Operating Frequency GPS VCO fRFout 1355.04 MHz LMX2522LQ1635 GPS VCO 5
Operating Frequency fFin 440.76 MHz LMX2522LQ1635, IF_FREQ [1:0] = 10 (Default Value) 6
Phase Detector Frequency fΦIF 120 kHz 6
Charge Pump Current ICPout 100 µA IF_CUR [1:0] = 00 6
Charge Pump Current ICPout 200 µA IF_CUR [1:0] = 01 6
Charge Pump Current ICPout 300 µA IF_CUR [1:0] = 10 6
Charge Pump Current ICPout 800 µA IF_CUR [1:0] = 11 6
Input Capacitance 3 pF 6
Output Capacitance 5 pF 6

CAD (KiCad official)

  • Symbol: LMX2522LQ1635
  • Footprint: Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm
  • 3D model: WQFN-28(5x5) (KiCad packages3D, STEP)
  • 3D model files: lmx2522lq1635-etched.step / lmx2522lq1635-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmx2522lq1635.step / lmx2522lq1635.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 68785d44d531575e, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF