main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv771mg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lmv771mg: viewers · Ray
lmv771mg-etched.fit.json lmv771mg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv771mg-etched.glb lmv771mg: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
lmv771mg-etched.step lmv771mg: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
lmv771mg-hero.glb lmv771mg: hero from the plain model · Ray
lmv771mg-hero.overlay.json lmv771mg: hero from the plain model · Ray
lmv771mg.glb Publish 0.1.0 · Ray
lmv771mg.kicad_mod Publish 0.1.0 · Ray
lmv771mg.kicad_sym Publish 0.1.0 · Ray
lmv771mg.lbr Publish 0.1.0 · Ray
lmv771mg.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/lmv771mg · Ray

LMV771MG

Texas Instruments · Operational Amplifier · SC-70-5

LMV771MG from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting input of the operational amplifier; input common-mode voltage range extends to 0 V (ground) and voltage at input pins must not exceed (V+)+0.3V or go below (V−)−0.3V.
2 GND power_in Negative supply / ground (V−) pin for the single-channel op amp.
3 -IN input Inverting input of the operational amplifier; input current at this pin must not exceed ±10 mA and voltage must stay within (V+)+0.3V to (V−)−0.3V.
4 VOUT output Rail-to-rail amplifier output capable of driving loads to within 100mV of the rail at RL=600Ω, with short-circuit current limited (continuous short-circuit current >35mA at 5V may cause permanent damage).
5 V+ power_in Positive supply pin, guaranteed operating range 2.7V to 5.5V (absolute maximum supply voltage 5.75V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

CAD (KiCad official)

  • Symbol: LMV771MG
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: lmv771mg-etched.step / lmv771mg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv771mg.step / lmv771mg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 de0d1fa50de60463, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF