component
LMV771MG
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLMV771MG
Texas Instruments · Operational Amplifier · SC-70-5
LMV771MG from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Non-inverting input of the operational amplifier; input common-mode voltage range extends to 0 V (ground) and voltage at input pins must not exceed (V+)+0.3V or go below (V−)−0.3V. |
| 2 | GND | power_in | Negative supply / ground (V−) pin for the single-channel op amp. |
| 3 | -IN | input | Inverting input of the operational amplifier; input current at this pin must not exceed ±10 mA and voltage must stay within (V+)+0.3V to (V−)−0.3V. |
| 4 | VOUT | output | Rail-to-rail amplifier output capable of driving loads to within 100mV of the rail at RL=600Ω, with short-circuit current limited (continuous short-circuit current >35mA at 5V may cause permanent damage). |
| 5 | V+ | power_in | Positive supply pin, guaranteed operating range 2.7V to 5.5V (absolute maximum supply voltage 5.75V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LMV771MG - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
lmv771mg-etched.step/lmv771mg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv771mg.step/lmv771mg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
de0d1fa50de60463, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).