main
Ray
lmv393mmx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
968bb9d
LMV393MMX
Texas Instruments · Comparators · MSOP-8
LMV393MMX from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Open-drain comparator A output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC). |
| 2 | -IN A | input | Inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 3 | +IN A | input | Non-inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 4 | GND | power_in | Negative supply / ground. Ground reference; V- pin. Total supply 2.7 V to 5.5 V referenced from VCC to GND. |
| 5 | +IN B | input | Non-inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 6 | -IN B | input | Inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 7 | OUT B | output | Open-drain comparator B output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC). |
| 8 | VCC | power_in | Positive supply rail. Operating range 2.7 V to 5.5 V (single supply) or ±1.35 V to ±2.75 V (dual supply). Bypass with 0.1 µF close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LMV393MMXLMV393MMXM
CAD (KiCad official)
- Symbol:
LMV393MMX - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lmv393mmx-etched.step/lmv393mmx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv393mmx.step/lmv393mmx.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lmv393mmx.step |
123 KB | You want the bare part, or you mark your own boards. |
lmv393mmx-etched.step |
1.8 MB | You want the part with LMV393MMX already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 453 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
1f736be31b782a1b, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMV393MMX
**Texas Instruments** · Comparators · MSOP-8
LMV393MMX from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Open-drain comparator A output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC). |
| 2 | -IN A | input | Inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 3 | +IN A | input | Non-inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 4 | GND | power_in | Negative supply / ground. Ground reference; V- pin. Total supply 2.7 V to 5.5 V referenced from VCC to GND. |
| 5 | +IN B | input | Non-inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 6 | -IN B | input | Inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V. |
| 7 | OUT B | output | Open-drain comparator B output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC). |
| 8 | VCC | power_in | Positive supply rail. Operating range 2.7 V to 5.5 V (single supply) or ±1.35 V to ±2.75 V (dual supply). Bypass with 0.1 µF close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LMV393MMX`
- `LMV393MMXM`
## CAD (KiCad official)
- Symbol: `LMV393MMX`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lmv393mmx-etched.step` / `lmv393mmx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmv393mmx.step` / `lmv393mmx.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`lmv393mmx.step`](lmv393mmx.step) | 123 KB | You want the bare part, or you mark your own boards. |
| [`lmv393mmx-etched.step`](lmv393mmx-etched.step) | 1.8 MB | You want the part with `LMV393MMX` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 453 faces against 147 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmv393mmx.pdf) (40 pp, sha256 `1f736be31b782a1b`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmv393mmx-datasheet.pdf)