main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmv393mmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
lmv393mmx-etched.fit.json lmv393mmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393mmx-etched.glb lmv393mmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393mmx-etched.step lmv393mmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmv393mmx.glb Publish 0.1.0 · Ray
lmv393mmx.kicad_mod Publish 0.1.0 · Ray
lmv393mmx.kicad_sym Publish 0.1.0 · Ray
lmv393mmx.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
lmv393mmx.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json lmv393mmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmv393mmx: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMV393MMX

Texas Instruments · Comparators · MSOP-8

LMV393MMX from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Open-drain comparator A output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC).
2 -IN A input Inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V.
3 +IN A input Non-inverting input of comparator A. Input common-mode range extends from V- (GND) to VCC - 1.5 V.
4 GND power_in Negative supply / ground. Ground reference; V- pin. Total supply 2.7 V to 5.5 V referenced from VCC to GND.
5 +IN B input Non-inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V.
6 -IN B input Inverting input of comparator B. Input common-mode range extends from V- (GND) to VCC - 1.5 V.
7 OUT B output Open-drain comparator B output. Requires an external pull-up resistor to VCC or a separate logic rail (up to VCC).
8 VCC power_in Positive supply rail. Operating range 2.7 V to 5.5 V (single supply) or ±1.35 V to ±2.75 V (dual supply). Bypass with 0.1 µF close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMV393MMX
  • LMV393MMXM

CAD (KiCad official)

  • Symbol: LMV393MMX
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmv393mmx-etched.step / lmv393mmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv393mmx.step / lmv393mmx.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv393mmx.step 123 KB You want the bare part, or you mark your own boards.
lmv393mmx-etched.step 1.8 MB You want the part with LMV393MMX already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 453 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 1f736be31b782a1b, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF