Generated by kicad-footprint-generator · KiCad file format 20260206
LMV358Q1MM
Texas Instruments · Operational Amplifier · VSSOP-8
LMV358Q1MM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier channel A; rail-to-rail output swing is V+ − 10 mV to V− + 65 mV at a 10 kΩ load. |
| 2 | IN A- | input | Inverting input of amplifier channel A; the datasheet advises limiting negative input voltage to −0.3 V (at 25 °C) with an input clamp diode and series resistor. |
| 3 | IN A+ | input | Non-inverting input of amplifier channel A; the input common-mode range includes ground (VCM −0.2 V to V+ − 0.8 V at 5 V). |
| 4 | V- | power_in | Negative (lowest) power supply; 0 V in the datasheet test conditions, and ground for single-supply operation. |
| 5 | IN B+ | input | Non-inverting input of amplifier channel B; the input common-mode range includes ground (VCM −0.2 V to V+ − 0.8 V at 5 V). |
| 6 | IN B- | input | Inverting input of amplifier channel B; the datasheet advises limiting negative input voltage to −0.3 V (at 25 °C) with an input clamp diode and series resistor. |
| 7 | OUT B | output | Output of amplifier channel B; rail-to-rail output swing is V+ − 10 mV to V− + 65 mV at a 10 kΩ load. |
| 8 | V+ | power_in | Positive (highest) power supply; the rated operating supply range is 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入失调电压 (2.7V) | VOS | 1.7 | 7 | mV | 6 | ||
| 输入偏置电流 (2.7V) | IB | 11 | 250 | nA | 6 | ||
| 输入失调电流 (2.7V) | IOS | 5 | 50 | nA | 6 | ||
| 共模抑制比 (2.7V) | CMRR | 50 | 63 | dB | 0V ≤ VCM ≤ 1.7V | 6 | |
| 电源抑制比 (2.7V) | PSRR | 50 | 60 | dB | 2.7V ≤ V+ ≤ 5V; VO = 1V | 6 | |
| 输出摆幅 (2.7V, 低电平) | VO | 60 | 180 | mV | 6 | ||
| 电源电流 双通道 (2.7V) | IS | 140 | 340 | µA | 双通道,两个放大器 | 6 | |
| 输入失调电压 (5V) | VOS | 1.7 | 7 | mV | 7 | ||
| 输入失调电压 (5V) | VOS | 9 | mV | 在温度范围内 | 7 | ||
| 输入偏置电流 (5V) | IB | 15 | 250 | nA | 7 | ||
| 输入偏置电流 (5V) | IB | 500 | nA | 在温度范围内 | 7 | ||
| 输入失调电流 (5V) | IOS | 5 | 50 | nA | 7 | ||
| 输入失调电流 (5V) | IOS | 150 | nA | 在温度范围内 | 7 | ||
| 共模抑制比 (5V) | CMRR | 50 | 65 | dB | 0V ≤ VCM ≤ 4V | 7 | |
| 电源抑制比 (5V) | PSRR | 50 | 60 | dB | 2.7V ≤ V+ ≤ 5V; VO = 1V、VCM = 1V | 7 | |
| 大信号电压增益 (5V) | AV | 15 | 100 | V/mV | RL = 2kΩ | 7 | |
| 大信号电压增益 (5V) | AV | 10 | V/mV | 在温度范围内,RL = 2kΩ | 7 | ||
| 输出摆幅 (5V, 低电平) | VO | 120 | 300 | mV | RL = 2kΩ(连接至 2.5V) | 7 | |
| 输出摆幅 (5V, 低电平) | VO | 400 | mV | 在温度范围内,RL = 2kΩ(连接至 2.5V) | 7 | ||
| 输出摆幅 (5V, 低电平) | VO | 65 | 180 | mV | RL = 2kΩ(连接至 2.5V) | 7 | |
| 输出摆幅 (5V, 低电平) | VO | 280 | mV | 在 125°C 下,RL = 2kΩ(连接至 2.5V) | 7 | ||
| 输出短路电流 拉电流 (5V) | IO | 5 | 60 | mA | 拉电流,VO = 0V | 7 | |
| 输出短路电流 灌电流 (5V) | IO | 10 | 160 | mA | 灌电流,VO = 5V | 7 | |
| 电源电流 双通道 (5V) | IS | 210 | 440 | µA | 双通道(两个放大器) | 7 | |
| 电源电流 双通道 (5V) | IS | 615 | µA | 双通道(两个放大器),在温度范围内 | 7 | ||
| 压摆率 (5V) | SR | 1 | V/µs | 作为电压跟随器连接且输入阶跃为 3V | 8 | ||
| 推荐电源电压 | 2.7 | 5.5 | V | 5 | |||
| 温度范围 (LMV358-N-Q1) | -40 | 125 | °C | 5 | |||
| 输入电压 | -0.3 | V | 5 | ||||
| 电源电压 (V+-V−) | 5.5 | V | 5 | ||||
| 焊接温度 (红外或对流) | 260 | °C | 30 秒 | 5 | |||
| 结温 | TJ | 150 | °C | 5 | |||
| 贮存温度 | Tstg | -65 | 150 | °C | 5 | ||
| ESD 人体放电模型 (HBM) | V(ESD) | -2000 | 2000 | V | HBM,符合 AEC Q100-002 标准 | 5 | |
| ESD 机器放电模型 (CDM) | V(ESD) | -100 | 100 | V | 机器放电模型 | 5 | |
| 结至环境热阻 (DGK, VSSOP-8) | RθJA | 235 | °C/W | DGK (VSSOP-8) 封装 | 6 |
CAD (KiCad official)
- Symbol:
LMV358Q1MM - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmv358q1mm-etched.step/lmv358q1mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv358q1mm.step/lmv358q1mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
9414764c20ce2b6d, retrieved 2026-11-11, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).