Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMV358Q1MM

Texas Instruments · Operational Amplifier · VSSOP-8

LMV358Q1MM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier channel A; rail-to-rail output swing is V+ − 10 mV to V− + 65 mV at a 10 kΩ load.
2 IN A- input Inverting input of amplifier channel A; the datasheet advises limiting negative input voltage to −0.3 V (at 25 °C) with an input clamp diode and series resistor.
3 IN A+ input Non-inverting input of amplifier channel A; the input common-mode range includes ground (VCM −0.2 V to V+ − 0.8 V at 5 V).
4 V- power_in Negative (lowest) power supply; 0 V in the datasheet test conditions, and ground for single-supply operation.
5 IN B+ input Non-inverting input of amplifier channel B; the input common-mode range includes ground (VCM −0.2 V to V+ − 0.8 V at 5 V).
6 IN B- input Inverting input of amplifier channel B; the datasheet advises limiting negative input voltage to −0.3 V (at 25 °C) with an input clamp diode and series resistor.
7 OUT B output Output of amplifier channel B; rail-to-rail output swing is V+ − 10 mV to V− + 65 mV at a 10 kΩ load.
8 V+ power_in Positive (highest) power supply; the rated operating supply range is 2.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入失调电压 (2.7V) VOS 1.7 7 mV 6
输入偏置电流 (2.7V) IB 11 250 nA 6
输入失调电流 (2.7V) IOS 5 50 nA 6
共模抑制比 (2.7V) CMRR 50 63 dB 0V ≤ VCM ≤ 1.7V 6
电源抑制比 (2.7V) PSRR 50 60 dB 2.7V ≤ V+ ≤ 5V; VO = 1V 6
输出摆幅 (2.7V, 低电平) VO 60 180 mV 6
电源电流 双通道 (2.7V) IS 140 340 µA 双通道,两个放大器 6
输入失调电压 (5V) VOS 1.7 7 mV 7
输入失调电压 (5V) VOS 9 mV 在温度范围内 7
输入偏置电流 (5V) IB 15 250 nA 7
输入偏置电流 (5V) IB 500 nA 在温度范围内 7
输入失调电流 (5V) IOS 5 50 nA 7
输入失调电流 (5V) IOS 150 nA 在温度范围内 7
共模抑制比 (5V) CMRR 50 65 dB 0V ≤ VCM ≤ 4V 7
电源抑制比 (5V) PSRR 50 60 dB 2.7V ≤ V+ ≤ 5V; VO = 1V、VCM = 1V 7
大信号电压增益 (5V) AV 15 100 V/mV RL = 2kΩ 7
大信号电压增益 (5V) AV 10 V/mV 在温度范围内,RL = 2kΩ 7
输出摆幅 (5V, 低电平) VO 120 300 mV RL = 2kΩ(连接至 2.5V) 7
输出摆幅 (5V, 低电平) VO 400 mV 在温度范围内,RL = 2kΩ(连接至 2.5V) 7
输出摆幅 (5V, 低电平) VO 65 180 mV RL = 2kΩ(连接至 2.5V) 7
输出摆幅 (5V, 低电平) VO 280 mV 在 125°C 下,RL = 2kΩ(连接至 2.5V) 7
输出短路电流 拉电流 (5V) IO 5 60 mA 拉电流,VO = 0V 7
输出短路电流 灌电流 (5V) IO 10 160 mA 灌电流,VO = 5V 7
电源电流 双通道 (5V) IS 210 440 µA 双通道(两个放大器) 7
电源电流 双通道 (5V) IS 615 µA 双通道(两个放大器),在温度范围内 7
压摆率 (5V) SR 1 V/µs 作为电压跟随器连接且输入阶跃为 3V 8
推荐电源电压 2.7 5.5 V 5
温度范围 (LMV358-N-Q1) -40 125 °C 5
输入电压 -0.3 V 5
电源电压 (V+-V−) 5.5 V 5
焊接温度 (红外或对流) 260 °C 30 秒 5
结温 TJ 150 °C 5
贮存温度 Tstg -65 150 °C 5
ESD 人体放电模型 (HBM) V(ESD) -2000 2000 V HBM,符合 AEC Q100-002 标准 5
ESD 机器放电模型 (CDM) V(ESD) -100 100 V 机器放电模型 5
结至环境热阻 (DGK, VSSOP-8) RθJA 235 °C/W DGK (VSSOP-8) 封装 6

CAD (KiCad official)

  • Symbol: LMV358Q1MM
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmv358q1mm-etched.step / lmv358q1mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv358q1mm.step / lmv358q1mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (63 pp, sha256 9414764c20ce2b6d, retrieved 2026-11-11, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF