main
History Download
Ray lmv321lilt: specified limits as data (metadata.characteristics, 40 rows from the datasheet) 015cbb8

LMV321LILT

STMicroelectronics · Operational Amplifier · SOT-23-5

LMV321LILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 In+ input Non-inverting input of the op-amp. Common-mode input range extends from (Vcc-)-0.2 V to (Vcc+)-1 V.
2 Vcc- power_in Negative supply / ground pin. Total supply voltage Vcc+ - Vcc- between 2.7 V and 5.5 V (6 V absolute maximum).
3 In- input Inverting input of the op-amp. Differential input voltage limited to +/-Vcc; input current must be limited to 10 mA by an external series resistor.
4 Out output Rail-to-rail op-amp output. Typical output swing 2.69 V high / 65 mV low into RL = 10 kOhm at Vcc = 2.7 V; slew rate 0.6 V/us.
5 Vcc+ power_in Positive supply pin. 2.7 V to 5.5 V operating range, 6 V absolute maximum. Typical supply current 120 uA per channel with no load.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LMV321LILT
  • LMV321LICT
  • LMV358LIST
  • LMV358LIDT
  • LMV358LIPT
  • LMV324LIPT
  • LMV324LIDT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 4
Input current Iin 10 mA 4
Storage temperature Tstg -65 150 °C 4
Maximum junction temperature Tj 150 °C 4
ESD human body model HBM 4000 V 4
ESD machine model MM 250 V 4
ESD charged device model CDM 1300 V 4
Latch-up immunity 200 mA 4
Supply voltage VCC 2.7 5.5 V 4
Operating free-air temperature range Toper -40 125 °C 4
Input offset voltage Vio 1 7 mV VCC+ = 2.7 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL to VCC/2 5
Input offset current Iio 0.5 30 nA VCC+ = 2.7 V, Vout = VCC/2, Tamb = 25 °C 5
Input bias current Iib 27 60 nA VCC+ = 2.7 V, Vout = VCC/2, Tamb = 25 °C 5
Common mode rejection ratio CMRR 70 75 dB VCC+ = 2.7 V, Vic = 0 V to Vcc-1 V, Vout = Vcc/2 5
Output swing high level VO 2.6 2.69 V VCC+ = 2.7 V, RL = 10 kΩ, high level 5
Output swing low level VO 65 180 mV VCC+ = 2.7 V, RL = 10 kΩ, low level 5
Supply current (per channel) ICC 120 180 µA VCC+ = 2.7 V, No load, Vout = VCC/2 5
Input offset voltage Vio 1 7 mV VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL to VCC/2 6
Input offset voltage over temperature Vio 9 mV VCC+ = 5 V, -40 °C < T < 125 °C 6
Input offset current Iio 0.5 30 nA VCC+ = 5 V, Vout = Vcc/2, Tamb = 25 °C 6
Input offset current over temperature Iio 50 nA VCC+ = 5 V, -40 °C < T < 125 °C 6
Input bias current Iib 27 60 nA VCC+ = 5 V, Vout = Vcc/2, Tamb = 25 °C 6
Input bias current over temperature Iib 110 nA VCC+ = 5 V, -40 °C < T < 125 °C 6
Common mode rejection ratio CMRR 72 75 dB VCC+ = 5 V, Vic = 0 V to Vcc-1 V, Vout = Vcc/2 6
Supply voltage rejection ratio SVRR 72 79 dB Vcc = 2.7 to 5 V 6
Large signal voltage gain Avd 90 100 dB VCC+ = 5 V, RL = 2 kΩ, Vout = 0.5 V to (VCC-0.5 V) 6
Large signal voltage gain over temperature Avd 80 dB VCC+ = 5 V, RL = 2 kΩ, Vout = 0.5 V to (VCC-0.5 V), -40 °C < T < 125 °C 6
Output swing high level VOH 4.9 4.99 V VCC+ = 5 V, RL = 10 kΩ 6
Output swing high level over temperature VOH 4.8 V VCC+ = 5 V, RL = 10 kΩ, -40 °C < T < 125 °C 6
Output swing high level VOH 4.7 4.96 V VCC+ = 5 V, RL = 2 kΩ 6
Output swing high level over temperature VOH 4.6 V VCC+ = 5 V, RL = 2 kΩ, -40 °C < T < 125 °C 6
Output swing low level VOL 65 180 mV VCC+ = 5 V, RL = 10 kΩ 6
Output swing low level over temperature VOL 280 mV VCC+ = 5 V, RL = 10 kΩ, -40 °C < T < 125 °C 6
Output swing low level VOL 120 300 mV VCC+ = 5 V, RL = 2 kΩ 6
Output swing low level over temperature VOL 400 mV VCC+ = 5 V, RL = 2 kΩ, -40 °C < T < 125 °C 6
Output short circuit current, sinking Iout 35 43 mA VCC+ = 5 V, Sinking, Vout = VCC 6
Output short circuit current, sourcing Iout 60 70 mA VCC+ = 5 V, Sourcing, Vout = 0 V 6
Supply current (per channel) ICC 130 250 µA VCC+ = 5 V, No load, Vout = VCC/2 6
Supply current (per channel) over temperature ICC 350 µA VCC+ = 5 V, -40 °C < T < 125 °C 6
Thermal resistance junction to ambient (SOT23-5) Rthja 250 °C/W SOT23-5 package; typical value 4

CAD (KiCad official)

  • Symbol: LMV321LILT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lmv321lilt-etched.step / lmv321lilt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmv321lilt.step / lmv321lilt.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv321lilt.step 85 KB You want the bare part, or you mark your own boards.
lmv321lilt-etched.step 1.3 MB You want the part with LMV321LILT already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 354 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (21 pp, sha256 af991d0f244e0304, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF