LMV321LILT
STMicroelectronics · Operational Amplifier · SOT-23-5
LMV321LILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | In+ | input | Non-inverting input of the op-amp. Common-mode input range extends from (Vcc-)-0.2 V to (Vcc+)-1 V. |
| 2 | Vcc- | power_in | Negative supply / ground pin. Total supply voltage Vcc+ - Vcc- between 2.7 V and 5.5 V (6 V absolute maximum). |
| 3 | In- | input | Inverting input of the op-amp. Differential input voltage limited to +/-Vcc; input current must be limited to 10 mA by an external series resistor. |
| 4 | Out | output | Rail-to-rail op-amp output. Typical output swing 2.69 V high / 65 mV low into RL = 10 kOhm at Vcc = 2.7 V; slew rate 0.6 V/us. |
| 5 | Vcc+ | power_in | Positive supply pin. 2.7 V to 5.5 V operating range, 6 V absolute maximum. Typical supply current 120 uA per channel with no load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LMV321LILTLMV321LICTLMV358LISTLMV358LIDTLMV358LIPTLMV324LIPTLMV324LIDT
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 4 | |||
| Input current | Iin | 10 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD human body model | HBM | 4000 | V | 4 | |||
| ESD machine model | MM | 250 | V | 4 | |||
| ESD charged device model | CDM | 1300 | V | 4 | |||
| Latch-up immunity | 200 | mA | 4 | ||||
| Supply voltage | VCC | 2.7 | 5.5 | V | 4 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Input offset voltage | Vio | 1 | 7 | mV | VCC+ = 2.7 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL to VCC/2 | 5 | |
| Input offset current | Iio | 0.5 | 30 | nA | VCC+ = 2.7 V, Vout = VCC/2, Tamb = 25 °C | 5 | |
| Input bias current | Iib | 27 | 60 | nA | VCC+ = 2.7 V, Vout = VCC/2, Tamb = 25 °C | 5 | |
| Common mode rejection ratio | CMRR | 70 | 75 | dB | VCC+ = 2.7 V, Vic = 0 V to Vcc-1 V, Vout = Vcc/2 | 5 | |
| Output swing high level | VO | 2.6 | 2.69 | V | VCC+ = 2.7 V, RL = 10 kΩ, high level | 5 | |
| Output swing low level | VO | 65 | 180 | mV | VCC+ = 2.7 V, RL = 10 kΩ, low level | 5 | |
| Supply current (per channel) | ICC | 120 | 180 | µA | VCC+ = 2.7 V, No load, Vout = VCC/2 | 5 | |
| Input offset voltage | Vio | 1 | 7 | mV | VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL to VCC/2 | 6 | |
| Input offset voltage over temperature | Vio | 9 | mV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Input offset current | Iio | 0.5 | 30 | nA | VCC+ = 5 V, Vout = Vcc/2, Tamb = 25 °C | 6 | |
| Input offset current over temperature | Iio | 50 | nA | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Input bias current | Iib | 27 | 60 | nA | VCC+ = 5 V, Vout = Vcc/2, Tamb = 25 °C | 6 | |
| Input bias current over temperature | Iib | 110 | nA | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Common mode rejection ratio | CMRR | 72 | 75 | dB | VCC+ = 5 V, Vic = 0 V to Vcc-1 V, Vout = Vcc/2 | 6 | |
| Supply voltage rejection ratio | SVRR | 72 | 79 | dB | Vcc = 2.7 to 5 V | 6 | |
| Large signal voltage gain | Avd | 90 | 100 | dB | VCC+ = 5 V, RL = 2 kΩ, Vout = 0.5 V to (VCC-0.5 V) | 6 | |
| Large signal voltage gain over temperature | Avd | 80 | dB | VCC+ = 5 V, RL = 2 kΩ, Vout = 0.5 V to (VCC-0.5 V), -40 °C < T < 125 °C | 6 | ||
| Output swing high level | VOH | 4.9 | 4.99 | V | VCC+ = 5 V, RL = 10 kΩ | 6 | |
| Output swing high level over temperature | VOH | 4.8 | V | VCC+ = 5 V, RL = 10 kΩ, -40 °C < T < 125 °C | 6 | ||
| Output swing high level | VOH | 4.7 | 4.96 | V | VCC+ = 5 V, RL = 2 kΩ | 6 | |
| Output swing high level over temperature | VOH | 4.6 | V | VCC+ = 5 V, RL = 2 kΩ, -40 °C < T < 125 °C | 6 | ||
| Output swing low level | VOL | 65 | 180 | mV | VCC+ = 5 V, RL = 10 kΩ | 6 | |
| Output swing low level over temperature | VOL | 280 | mV | VCC+ = 5 V, RL = 10 kΩ, -40 °C < T < 125 °C | 6 | ||
| Output swing low level | VOL | 120 | 300 | mV | VCC+ = 5 V, RL = 2 kΩ | 6 | |
| Output swing low level over temperature | VOL | 400 | mV | VCC+ = 5 V, RL = 2 kΩ, -40 °C < T < 125 °C | 6 | ||
| Output short circuit current, sinking | Iout | 35 | 43 | mA | VCC+ = 5 V, Sinking, Vout = VCC | 6 | |
| Output short circuit current, sourcing | Iout | 60 | 70 | mA | VCC+ = 5 V, Sourcing, Vout = 0 V | 6 | |
| Supply current (per channel) | ICC | 130 | 250 | µA | VCC+ = 5 V, No load, Vout = VCC/2 | 6 | |
| Supply current (per channel) over temperature | ICC | 350 | µA | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Thermal resistance junction to ambient (SOT23-5) | Rthja | 250 | °C/W | SOT23-5 package; typical value | 4 |
CAD (KiCad official)
- Symbol:
LMV321LILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lmv321lilt-etched.step/lmv321lilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmv321lilt.step/lmv321lilt.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lmv321lilt.step |
85 KB | You want the bare part, or you mark your own boards. |
lmv321lilt-etched.step |
1.3 MB | You want the part with LMV321LILT already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 354 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
af991d0f244e0304, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).