Generated by kicad-footprint-generator · KiCad file format 20260206
LMR51606XFQDBVRQ1
Texas Instruments · IC · SOT-23-6
LMR51606XFQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground pins connected internally to the source of the low-side FET; connect to system ground and the ground side of CIN and COUT, with the path to CIN kept as short as possible. |
| 3 | FB | input | Feedback input to the converter; a resistor divider sets the output voltage, and this terminal must never be shorted to ground during operation. |
| 4 | EN | input | Precision enable input where High = On and Low = Off; it must not float, can be tied to VIN, and allows an adjustable UVLO set by an external resistor divider. |
| 5 | VIN | power_in | Supply input to the internal bias LDO and high-side FET; input bypass capacitors CIN must be connected directly to this pin and GND. |
| 6 | SW | power_out | Switching output of the converter, internally connected to the source of the high-side FET and the drain of the low-side FET; connect to the power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN to GND | VIN | -0.3 | 70 | V | 4 | ||
| Input voltage EN to GND | EN | -0.3 | V | max printed as VIN + 0.3 V | 4 | ||
| Input voltage FB to GND | FB | -0.3 | 5.5 | V | 4 | ||
| Output voltage SW to GND | SW | -0.3 | 70 | V | 4 | ||
| Output voltage SW to GND transient | SW | -5 | 70 | V | less than 10ns transients | 4 | |
| Output voltage CBOOT to SW | CBOOT | -0.3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input voltage VIN to GND | VIN | 4 | 65 | V | 4 | ||
| Input voltage EN | EN | 0 | V | max printed as VIN | 4 | ||
| Input voltage FB | FB | 0 | 4.5 | V | 4 | ||
| Output voltage VOUT | VOUT | 0.8 | 28 | V | 4 | ||
| Output current Iout (LMR51606-Q1) | Iout | 0.6 | A | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| VIN operating input voltage range | VIN | 4 | 65 | V | 6 | ||
| VIN UVLO rising threshold | VIN_ UVLO(R) | 3.82 | 4 | V | VIN rising | 5 | |
| VIN UVLO falling threshold | VIN_ UVLO(F) | 3.4 | 3.56 | V | VIN falling | 5 | |
| EN voltage rising threshold | VEN(R) | 1.1 | 1.227 | 1.36 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.85 | 1 | 1.15 | V | EN falling, disable switching | 5 |
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | 50 | nA | VEN = 3V | 5 | |
| Reference voltage | VFB | 0.792 | 0.8 | 0.808 | V | 5 | |
| Switching frequency, CCM operation | fSW(CCM) | 360 | 400 | 440 | KHz | 5 | |
| High-side peak current limit (LMR51606-Q1) | IHS_PK(OC) | 0.8 | 1.1 | 1.4 | A | LMR51606-Q1 | 6 |
| Low-side valley current limit (LMR51606-Q1) | ILS_V(OC) | 0.62 | 0.8 | 0.98 | A | LMR51606-Q1 | 6 |
| VIN shutdown supply current | ISD(VIN) | 0.8 | 3 | µA | VEN = 0V | 5 | |
| Maximum switch duty cycle | DMAX | 96 | % | 6 | |||
| VIN quiescent current | IQ(VIN) | 420 | µA | VEN = 3V, FPWM operation | 5 | ||
| VIN UVLO hysteresis | VIN_ UVLO(H) | 0.25 | V | 5 | |||
| FB input leakage current | IFB(LKG) | 0.2 | nA | VFB = 0.8V | 5 | ||
| Internal fixed soft-start time | tSS | 2.3 | ms | 5 | |||
| High-side MOSFET on-resistance | RDSON(HS) | 0.7 | Ω | VIN = 12V, TJ = 25°C | 5 | ||
| Low-side MOSFET on-resistance | RDSON(LS) | 0.36 | Ω | VIN = 12V, TJ = 25°C | 5 | ||
| Minimum ON pulse width | tON_MIN | 80 | ns | VIN = 12V, IOUT = 0.1A | 5 | ||
| Maximum ON pulse width | tON_MAX | 5 | µs | VIN = 12V, IOUT = 0.5A | 5 | ||
| Minimum OFF pulse width | tOFF_MIN | 200 | ns | VIN = 5V | 5 | ||
| Low-side negative current limit (LMR51606-Q1) | ILS(NOC) | -0.36 | A | LMR51606-Q1 FPWM Only | 6 | ||
| Zero-cross detection current threshold | IZC | 0 | A | 6 | |||
| Thermal shutdown threshold | TJ(SD) | 165 | °C | Junction temperature rising | 6 | ||
| Thermal shutdown hysteresis | TJ(HYS) | 20 | °C | 6 | |||
| FB voltage to trip short-circuit hiccup mode | VHC | 0.32 | V | 6 | |||
| Time between current-limit hiccup burst | THICCUP | 150 | ms | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 147.8 | °C/W | 5 | |||
| Junction-to-ambient thermal resistance with EVM | RθJA(Effective) | 67.2 | °C/W | with EVM | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 36.6 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 14.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 36.4 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 21 |
CAD (KiCad official)
- Symbol:
LMR51606XFQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr51606xfqdbvrq1-etched.step/lmr51606xfqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr51606xfqdbvrq1.step/lmr51606xfqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
21a1ad213c491448, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).