Generated by kicad-footprint-generator · KiCad file format 20260206
LMR51430YDDCR
Texas Instruments · DC-DC Converters · SOT-23-6
LMR51430YDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground terminal connected to the source of the low-side FET internally; connect to system ground and the ground side of CIN and COUT. |
| 2 | SW | output | Switching output node (−0.3 V to 38 V DC) connected to high-side FET source and low-side FET drain; connect to power inductor. |
| 3 | VIN | power_in | Supply input terminal (4.5 V to 36 V) for internal bias LDO and high-side FET; connect directly to input supply and bypass capacitors CIN. |
| 4 | FB | input | Feedback input (0 V to 4.5 V with 0.6-V reference voltage) for setting output voltage via resistor divider; never short to ground during operation. |
| 5 | EN | input | Precision enable input with rising threshold 1.227 V (1.1-1.36 V) and falling threshold 1.08 V (0.95-1.22 V); do not leave floating. |
| 6 | CB | output | Bootstrap capacitor connection for high-side FET driver with 5.5 V maximum relative to SW pin; connect 100-nF ceramic capacitor from CB to SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN | VIN | -0.3 | 38 | V | 4 | ||
| EN pin voltage | EN | -0.3 | V | 4 | |||
| FB pin voltage | FB | -0.3 | 5.5 | V | 4 | ||
| Output voltage SW, DC | SW | -0.3 | 38 | V | DC | 4 | |
| Output voltage SW, transient | SW | -3 | 38 | V | transient < 20 ns | 4 | |
| CB pin voltage | CB | -0.3 | 43.5 | V | 4 | ||
| CB to SW voltage | CB to SW | -0.3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage VIN to GND | VIN | 4.5 | 36 | V | 4 | ||
| EN pin voltage | EN | 0 | V | 4 | |||
| FB pin voltage | FB | 0 | 4.5 | V | 4 | ||
| Output voltage VOUT | VOUT | 0.6 | V | 4 | |||
| Output current | Iout | 3 | A | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| VIN quiescent current (non-switching) | IQ(VIN) | 40 | 65 | µA | VEN = 3 V, PFM variant only | 5 | |
| VIN shutdown supply current | ISD(VIN) | 3 | 15 | µA | VEN = 0 V | 5 | |
| VIN UVLO rising threshold | VINUVLO(R) | 3.89 | 4.5 | V | VIN rising | 5 | |
| VIN UVLO falling threshold | VINUVLO(F) | 3.35 | 3.58 | V | VIN falling | 5 | |
| EN voltage rising threshold | VEN(R) | 1.1 | 1.227 | 1.36 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.95 | 1.08 | 1.22 | V | EN falling, disable switching | 5 |
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | 200 | nA | VEN = 3 V | 5 | |
| Reference voltage | Vfb | 0.591 | 0.6 | 0.609 | V | 5 | |
| FB input leakage current | IFB(LKG) | 0.8 | 50 | nA | VFB = 1.2 V | 5 | |
| Switching frequency, CCM operation | fSW2(CCM) | 0.95 | 1.1 | 1.25 | MHz | 1.1-MHz trim option | 5 |
| Internal fixed soft-start time | tSS | 3.2 | 4 | 5.4 | ms | 5 | |
| High-side peak current limit | IHS_PK(OC) | 3.67 | 4.76 | 6.68 | A | LM51430 | 5 |
| Low-side valley current limit | ILS_V(OC) | 2.75 | 3.5 | 4.2 | A | LM51430 | 6 |
| VIN operating input voltage range | VIN | 4.5 | 36 | V | 6 | ||
| Adjustable output voltage regulation | VOUT | -1.5 | 2.5 | % | PFM operation | 6 | |
| Maximum switch duty cycle | DMAX | 98 | % | 6 | |||
| High-side MOSFET on-resistance thermal metric RθJA (junction-to-ambient) | RθJA | 107.8 | °C/W | JESD 51-7, 4-layer JEDEC board | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 52.4 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 23.3 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 9.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 23 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LMR51430YDDCR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr51430yddcr-etched.step/lmr51430yddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr51430yddcr.step/lmr51430yddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
c4ef3cfd8fbc3350, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).