Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMR51430YDDCR

Texas Instruments · DC-DC Converters · SOT-23-6

LMR51430YDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground terminal connected to the source of the low-side FET internally; connect to system ground and the ground side of CIN and COUT.
2 SW output Switching output node (−0.3 V to 38 V DC) connected to high-side FET source and low-side FET drain; connect to power inductor.
3 VIN power_in Supply input terminal (4.5 V to 36 V) for internal bias LDO and high-side FET; connect directly to input supply and bypass capacitors CIN.
4 FB input Feedback input (0 V to 4.5 V with 0.6-V reference voltage) for setting output voltage via resistor divider; never short to ground during operation.
5 EN input Precision enable input with rising threshold 1.227 V (1.1-1.36 V) and falling threshold 1.08 V (0.95-1.22 V); do not leave floating.
6 CB output Bootstrap capacitor connection for high-side FET driver with 5.5 V maximum relative to SW pin; connect 100-nF ceramic capacitor from CB to SW.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN VIN -0.3 38 V 4
EN pin voltage EN -0.3 V 4
FB pin voltage FB -0.3 5.5 V 4
Output voltage SW, DC SW -0.3 38 V DC 4
Output voltage SW, transient SW -3 38 V transient < 20 ns 4
CB pin voltage CB -0.3 43.5 V 4
CB to SW voltage CB to SW -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage VIN to GND VIN 4.5 36 V 4
EN pin voltage EN 0 V 4
FB pin voltage FB 0 4.5 V 4
Output voltage VOUT VOUT 0.6 V 4
Output current Iout 3 A 4
Operating junction temperature TJ -40 150 °C 4
VIN quiescent current (non-switching) IQ(VIN) 40 65 µA VEN = 3 V, PFM variant only 5
VIN shutdown supply current ISD(VIN) 3 15 µA VEN = 0 V 5
VIN UVLO rising threshold VINUVLO(R) 3.89 4.5 V VIN rising 5
VIN UVLO falling threshold VINUVLO(F) 3.35 3.58 V VIN falling 5
EN voltage rising threshold VEN(R) 1.1 1.227 1.36 V EN rising, enable switching 5
EN voltage falling threshold VEN(F) 0.95 1.08 1.22 V EN falling, disable switching 5
EN pin sourcing current post EN rising threshold IEN(P2) 10 200 nA VEN = 3 V 5
Reference voltage Vfb 0.591 0.6 0.609 V 5
FB input leakage current IFB(LKG) 0.8 50 nA VFB = 1.2 V 5
Switching frequency, CCM operation fSW2(CCM) 0.95 1.1 1.25 MHz 1.1-MHz trim option 5
Internal fixed soft-start time tSS 3.2 4 5.4 ms 5
High-side peak current limit IHS_PK(OC) 3.67 4.76 6.68 A LM51430 5
Low-side valley current limit ILS_V(OC) 2.75 3.5 4.2 A LM51430 6
VIN operating input voltage range VIN 4.5 36 V 6
Adjustable output voltage regulation VOUT -1.5 2.5 % PFM operation 6
Maximum switch duty cycle DMAX 98 % 6
High-side MOSFET on-resistance thermal metric RθJA (junction-to-ambient) RθJA 107.8 °C/W JESD 51-7, 4-layer JEDEC board 5
Junction-to-case (top) thermal resistance RθJC(top) 52.4 °C/W 5
Junction-to-board thermal resistance RθJB 23.3 °C/W 5
Junction-to-top characterization parameter ψJT 9.3 °C/W 5
Junction-to-board characterization parameter ψJB 23 °C/W 5

CAD (KiCad official)

  • Symbol: LMR51430YDDCR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr51430yddcr-etched.step / lmr51430yddcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr51430yddcr.step / lmr51430yddcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 c4ef3cfd8fbc3350, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF