main
Ray Publish 0.1.0 8d42eda

LMR51406XFDBVR

TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-6

LMR51406XFDBVR from TEXAS INSTRUMENTS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CB power_out Bootstrap capacitor connection for the high-side FET driver; connect a high quality 100nF capacitor from this pin to the SW pin.
2 GND power_in Power ground pins connected internally to the source of the low-side FET; connect to system ground and to the ground side of CIN and COUT, keeping the path to CIN as short as possible.
3 FB input Feedback input to the converter; connect a resistor divider to set the output voltage and never short this terminal to ground during operation.
4 EN input Precision enable input; do not float, high = on and low = off, and it can be tied to VIN or used with an external resistor divider for adjustable UVLO.
5 VIN power_in Supply input to the internal bias LDO and high-side FET; connect to the input supply and to input bypass capacitors CIN, which must be directly connected to this pin and GND.
6 SW power_out Switching output internally connected to the high-side FET source and low-side FET drain; connect to the power inductor.

Key specifications

Parameter Value
Manufacturer TEXAS INSTRUMENTS
Package SOT-23-6
Category Global Sourcing Parts
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN to GND VIN -0.3 45 V 4
Input voltage EN to GND EN -0.3 V 4
Input voltage FB to GND FB -0.3 5.5 V 4
Output voltage SW to GND SW -0.3 45 V 4
Output voltage SW to GND transient SW -5 50 V less than 10ns transients 4
Output voltage CBOOT to SW CBOOT -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN to GND VIN 4 42 V 4
Input voltage EN EN 0 V 4
Input voltage FB FB 0 4.5 V 4
Output voltage VOUT VOUT 0.8 28 V 4
Output current Iout (LMR51406) Iout 0.6 A 4
Operating junction temperature TJ -40 150 °C 4
VIN quiescent current, FPWM operation IQ(VIN) 420 µA VEN = 3V, FPWM Operation 5
VIN shutdown supply current ISD(VIN) 0.8 3 µA VEN = 0V 5
VIN UVLO rising threshold VIN_UVLO(R) 3.82 4 V VIN rising 5
VIN UVLO falling threshold VIN_UVLO(F) 3.4 3.56 V VIN falling 5
VIN UVLO hysteresis VIN_UVLO(H) 0.25 V 5
EN voltage rising threshold VEN(R) 1.1 1.227 1.36 V EN rising, enable switching 5
EN voltage falling threshold VEN(F) 0.85 1 1.15 V EN falling, disable switching 5
EN pin sourcing current post EN rising threshold IEN(P2) 10 50 nA VEN = 3V 5
Reference voltage VFB 0.788 0.8 0.812 V 5
FB input leakage current IFB(LKG) 0.2 nA VFB = 0.8V 5
Switching frequency, CCM operation X version fSW(CCM) 340 400 460 KHz CCM operation, X version 5
Internal fixed soft-start time tSS 2.3 ms 5
High-side MOSFET on-resistance RDSON(HS) 0.7 Ω VIN = 12V, TJ = 25°C 5
Low-side MOSFET on-resistance RDSON(LS) 0.36 Ω VIN = 12V, TJ = 25°C 5
Minimum ON pulse width tON_MIN 80 ns VIN = 12V, IOUT = 0.1A 5
Maximum ON pulse width tON_MAX 5 µs VIN = 12V, IOUT = 0.5A 5
Minimum OFF pulse width tOFF_MIN 200 ns VIN = 5V 6
High-side peak current limit LMR51406 IHS_PK(OC) 0.8 1.1 1.4 A LMR51406 6
Low-side valley current limit LMR51406 ILS_V(OC) 0.62 0.8 0.98 A LMR51406 6
Low-side negative current limit LMR51406 ILS(NOC) -0.36 A LMR51406, FPWM Only 6
Zero-cross detection current threshold IZC 0 A 6
Thermal shutdown threshold TJ(SD) 165 °C Junction temperature rising 6
Thermal shutdown hysteresis TJ(HYS) 20 °C 6
VIN operating input voltage range VIN 4 42 V 6
Maximum switch duty cycle DMAX 98 % 6
FB pin voltage to trip short-circuit hiccup mode VHC 0.32 V 6
Time between current-limit hiccup burst THICCUP 150 ms 6
Junction-to-ambient thermal resistance RθJA 147.8 °C/W 5
Junction-to-ambient thermal resistance with EVM RθJA(Effective) 95 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 71.1 °C/W 5
Junction-to-board thermal resistance RθJB 36.6 °C/W 5
Junction-to-top characterization parameter ψJT 14.2 °C/W 5
Junction-to-board characterization parameter ψJB 36.4 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used 21

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LMR51406XFDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmr51406xfdbvr-etched.step / lmr51406xfdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr51406xfdbvr.step / lmr51406xfdbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TEXAS INSTRUMENTS datasheet (33 pp, sha256 a61ac445a7c8c97e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF