Generated by kicad-footprint-generator · KiCad file format 20260206
LMR51406XFDBVR
TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-6
LMR51406XFDBVR from TEXAS INSTRUMENTS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | power_out | Bootstrap capacitor connection for the high-side FET driver; connect a high quality 100nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground pins connected internally to the source of the low-side FET; connect to system ground and to the ground side of CIN and COUT, keeping the path to CIN as short as possible. |
| 3 | FB | input | Feedback input to the converter; connect a resistor divider to set the output voltage and never short this terminal to ground during operation. |
| 4 | EN | input | Precision enable input; do not float, high = on and low = off, and it can be tied to VIN or used with an external resistor divider for adjustable UVLO. |
| 5 | VIN | power_in | Supply input to the internal bias LDO and high-side FET; connect to the input supply and to input bypass capacitors CIN, which must be directly connected to this pin and GND. |
| 6 | SW | power_out | Switching output internally connected to the high-side FET source and low-side FET drain; connect to the power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | SOT-23-6 |
| Category | Global Sourcing Parts |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN to GND | VIN | -0.3 | 45 | V | 4 | ||
| Input voltage EN to GND | EN | -0.3 | V | 4 | |||
| Input voltage FB to GND | FB | -0.3 | 5.5 | V | 4 | ||
| Output voltage SW to GND | SW | -0.3 | 45 | V | 4 | ||
| Output voltage SW to GND transient | SW | -5 | 50 | V | less than 10ns transients | 4 | |
| Output voltage CBOOT to SW | CBOOT | -0.3 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input voltage VIN to GND | VIN | 4 | 42 | V | 4 | ||
| Input voltage EN | EN | 0 | V | 4 | |||
| Input voltage FB | FB | 0 | 4.5 | V | 4 | ||
| Output voltage VOUT | VOUT | 0.8 | 28 | V | 4 | ||
| Output current Iout (LMR51406) | Iout | 0.6 | A | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| VIN quiescent current, FPWM operation | IQ(VIN) | 420 | µA | VEN = 3V, FPWM Operation | 5 | ||
| VIN shutdown supply current | ISD(VIN) | 0.8 | 3 | µA | VEN = 0V | 5 | |
| VIN UVLO rising threshold | VIN_UVLO(R) | 3.82 | 4 | V | VIN rising | 5 | |
| VIN UVLO falling threshold | VIN_UVLO(F) | 3.4 | 3.56 | V | VIN falling | 5 | |
| VIN UVLO hysteresis | VIN_UVLO(H) | 0.25 | V | 5 | |||
| EN voltage rising threshold | VEN(R) | 1.1 | 1.227 | 1.36 | V | EN rising, enable switching | 5 |
| EN voltage falling threshold | VEN(F) | 0.85 | 1 | 1.15 | V | EN falling, disable switching | 5 |
| EN pin sourcing current post EN rising threshold | IEN(P2) | 10 | 50 | nA | VEN = 3V | 5 | |
| Reference voltage | VFB | 0.788 | 0.8 | 0.812 | V | 5 | |
| FB input leakage current | IFB(LKG) | 0.2 | nA | VFB = 0.8V | 5 | ||
| Switching frequency, CCM operation X version | fSW(CCM) | 340 | 400 | 460 | KHz | CCM operation, X version | 5 |
| Internal fixed soft-start time | tSS | 2.3 | ms | 5 | |||
| High-side MOSFET on-resistance | RDSON(HS) | 0.7 | Ω | VIN = 12V, TJ = 25°C | 5 | ||
| Low-side MOSFET on-resistance | RDSON(LS) | 0.36 | Ω | VIN = 12V, TJ = 25°C | 5 | ||
| Minimum ON pulse width | tON_MIN | 80 | ns | VIN = 12V, IOUT = 0.1A | 5 | ||
| Maximum ON pulse width | tON_MAX | 5 | µs | VIN = 12V, IOUT = 0.5A | 5 | ||
| Minimum OFF pulse width | tOFF_MIN | 200 | ns | VIN = 5V | 6 | ||
| High-side peak current limit LMR51406 | IHS_PK(OC) | 0.8 | 1.1 | 1.4 | A | LMR51406 | 6 |
| Low-side valley current limit LMR51406 | ILS_V(OC) | 0.62 | 0.8 | 0.98 | A | LMR51406 | 6 |
| Low-side negative current limit LMR51406 | ILS(NOC) | -0.36 | A | LMR51406, FPWM Only | 6 | ||
| Zero-cross detection current threshold | IZC | 0 | A | 6 | |||
| Thermal shutdown threshold | TJ(SD) | 165 | °C | Junction temperature rising | 6 | ||
| Thermal shutdown hysteresis | TJ(HYS) | 20 | °C | 6 | |||
| VIN operating input voltage range | VIN | 4 | 42 | V | 6 | ||
| Maximum switch duty cycle | DMAX | 98 | % | 6 | |||
| FB pin voltage to trip short-circuit hiccup mode | VHC | 0.32 | V | 6 | |||
| Time between current-limit hiccup burst | THICCUP | 150 | ms | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 147.8 | °C/W | 5 | |||
| Junction-to-ambient thermal resistance with EVM | RθJA(Effective) | 95 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 36.6 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 14.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 36.4 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The SW pin connecting to the inductor must be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) must be used | 21 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMR51406XFDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmr51406xfdbvr-etched.step/lmr51406xfdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr51406xfdbvr.step/lmr51406xfdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (33 pp, sha256
a61ac445a7c8c97e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).