Generated by kicad-footprint-generator · KiCad file format 20260206
LMR50410YFQDBVRQ1
Texas Instruments · DC-DC Converters · SOT-23-6
LMR50410YFQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | output | Bootstrap capacitor pin for high-side gate driver; connect 100-nF capacitor between this pin and SW. |
| 2 | GND | power_in | Power ground return path for internal FETs; connect to system ground and output capacitor return paths. |
| 3 | FB | input | Feedback input with 1.0V nominal reference voltage; connect resistor divider to set output voltage. |
| 4 | EN | input | Precision enable input; high level (>1.36V typical) enables and low level (<0.95V typical) disables converter, do not leave floating. |
| 5 | VIN | power_in | Input power supply terminal accepting 4V to 36V; connect input supply and bypass capacitors directly to this pin and GND. |
| 6 | SW | output | Switching output node connected to high-side FET source and low-side FET drain; connect to inductor for step-down conversion. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN to GND (absolute maximum) | VIN | -0.3 | 38 | V | 4 | ||
| FB to GND (absolute maximum) | -0.3 | 5.5 | V | 4 | |||
| SW to GND (absolute maximum) | -0.3 | V | 4 | ||||
| SW to GND less than 10-ns transients (absolute maximum) | -3.5 | 38 | V | less than 10-ns transients | 4 | ||
| CB to SW (absolute maximum) | -0.3 | 5.5 | V | 4 | |||
| Junction temperature (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage VIN to GND (recommended) | VIN | 4 | 36 | V | 4 | ||
| EN to GND (recommended) | 0 | V | 4 | ||||
| Output voltage VOUT (recommended) | VOUT | 1 | 28 | V | Maximum VOUT ensured up to 90% of VIN in final production | 4 | |
| Output current (recommended) | IOUT | 0 | 1 | A | 4 | ||
| Undervoltage lockout rising threshold | VIN_UVLO | 3.55 | 3.75 | 4 | V | 5 | |
| Undervoltage lockout falling threshold | VIN_UVLO | 3.25 | 3.45 | 3.65 | V | 5 | |
| Enable input high-level for VOUT | VEN-VOUT-H | 1.1 | 1.23 | 1.36 | V | VENABLE rising | 5 |
| Enable input low-level for VOUT | VEN-VOUT-L | 0.95 | 1.1 | 1.22 | V | VENABLE falling | 5 |
| Enable input leakage current | ILKG-EN | 10 | 200 | nA | VEN = 3.3V | 5 | |
| Shutdown quiescent current measured at VIN pin | ISD | 3 | 10 | µA | VEN = 0 V | 5 | |
| Feedback voltage | VFB | 0.99 | 1 | 1.01 | V | 5 | |
| High-side current limit | ISC | 1.25 | 1.6 | 1.9 | A | Vin=12V | 5 |
| Low-side current limit | ILS-LIMIT | 0.9 | 1.1 | 1.3 | A | Vin=12V | 5 |
| Internal oscillator frequency | FOSC | 1.8 | 2.1 | 2.4 | MHz | 2.1-MHz variant | 6 |
| Adjustable output voltage regulation (FPWM operation) | VOUT | -1.5 | 1.5 | % | Deviation from nominal VOUT at VIN = 24 V, IOUT = 0 A to full load | 6 | |
| Maximum switch duty cycle | DMAX | 98 | % | 6 | |||
| Undervoltage lockout hysteresis | 0.3 | V | 5 | ||||
| Enable input hysteresis for VOUT | VEN-VOUT-HYS | 130 | mV | Hysteresis | 5 | ||
| Feedback leakage current | ILKG-FB | 0.2 | nA | FB = 1.2 V | 5 | ||
| Negative current limit (FPWM variant only) | IL-NEG | -0.6 | A | 5 | |||
| High-side MOSFET ON-resistance | RDS-ON-HS | 450 | mΩ | TJ=25 ℃, VIN = 12 V | 5 | ||
| Low-side MOSFET ON-resistance | RDS-ON-LS | 240 | mΩ | TJ=25 ℃, VIN = 12 V | 5 | ||
| Thermal shutdown rising threshold | TSD-Rising | 170 | °C | Shutdown threshold | 5 | ||
| Thermal shutdown falling (recovery) threshold | TSD-Falling | 158 | °C | Recovery threshold | 6 | ||
| Minimum switch on-time | tON-MIN | 60 | ns | IOUT=1A | 6 | ||
| Minimum switch off-time | tOFF-MIN | 110 | ns | IOUT=1A | 6 | ||
| Maximum switch on-time | tON-MAX | 7.5 | µs | 6 | |||
| Internal soft-start time | tSS | 1.8 | ms | 6 | |||
| Time between current-limit hiccup burst | tHC | 135 | ms | 6 | |||
| FB pin voltage required to trip short-circuit hiccup mode | VHC | 0.4 | V | 6 | |||
| Switch voltage dead time | tD | 2 | ns | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 173 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 116 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-board thermal resistance | RθJB | 31 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-top characterization parameter | ψJT | 20 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-board characterization parameter | ψJB | 30 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 5 |
CAD (KiCad official)
- Symbol:
LMR50410YFQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr50410yfqdbvrq1-etched.step/lmr50410yfqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr50410yfqdbvrq1.step/lmr50410yfqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
65ab961f308f6fad, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).