main
Ray lmr50410y3fqdbvrq1: specified limits as data (metadata.characteristics, 33 rows from the datasheet) 51a1b84

LMR50410Y3FQDBVRQ1

Texas Instruments · DC-DC Converters · SOT-23-6

LMR50410Y3FQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB power_in Bootstrap capacitor connection for high-side FET driver; connect 100-nF high-quality capacitor from this pin to SW pin.
2 GND power_in Power ground connected to low-side FET source internally; connect to system ground and input/output capacitor grounds with shortest possible path.
3 FB input Feedback input to converter for output voltage setting via resistor divider; never short this terminal to ground during operation.
4 EN input Precision enable input to converter with high = on and low = off; do not float, can be tied to VIN for self-startup or used with external UVLO divider.
5 VIN power_in Supply input terminal to internal bias LDO and high-side FET, operating range 4V to 36V; connect input supply and bypass capacitors directly to this pin.
6 SW output Switching output of the converter internally connected to source of high-side FET and drain of low-side FET; connect to power inductor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN to GND (recommended) VIN 4 36 V 4
EN to GND (recommended) 0 V Maximum is VIN; must not exceed VIN by more than 0.3 V (footnote 2) 4
Output voltage (recommended) VOUT 1 28 V Maximum VOUT ensured up to 90% of VIN in final production (footnote 4) 4
Output current (recommended) IOUT 0 1 A 4
Operating junction temperature range (recommended) -40 150 °C Recommended operating junction temperature range 4
Input voltage VIN to GND (absolute maximum) VIN -0.3 38 V 4
EN to GND (absolute maximum) -0.3 V Maximum printed as VIN+0.3 V 4
FB to GND (absolute maximum) FB -0.3 5.5 V 4
SW to GND (absolute maximum) SW -0.3 V Maximum printed as VIN+0.3 V 4
SW to GND less than 10-ns transients (absolute maximum) SW -3.5 38 V Less than 10-ns transients 4
CB to SW (absolute maximum) CB -0.3 5.5 V CB to SW 4
Junction temperature (absolute maximum) TJ -40 150 °C Over junction temperature range 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Human body model ESD rating V(ESD) -2500 2500 V Human body model (HBM), printed ±2500 V 4
Charged device model ESD rating V(ESD) -750 750 V Charged device model (CDM), printed ±750 V 4
Rising UVLO threshold VIN_UVLO 3.55 3.75 4 V 5
Falling UVLO threshold VIN_UVLO 3.25 3.45 3.65 V 5
Enable input high-level for VOUT VEN-VOUT-H 1.1 1.23 1.36 V VENABLE rising 5
Enable input low-level for VOUT VEN-VOUT-L 0.95 1.1 1.22 V VENABLE falling 5
Output voltage (3.3 V fixed option) VOUT-3.3V-Fixed 3.25 3.3 3.35 V Vin=12V 5
High-side current limit ISC 1.25 1.6 1.9 A Vin=12V 5
Low-side current limit ILS-LIMIT 0.9 1.1 1.3 A Vin=12V 5
Internal oscillator frequency FOSC 1.8 2.1 2.4 MHz 2.1-MHz variant 6
Adjustable output voltage regulation (FPWM operation) VOUT -1.5 1.5 % FPWM operation; deviation from nominal VOUT at VIN = 24 V, IOUT = 0 A to full load (footnote 1) 6
Maximum switch duty cycle DMAX 98 % Footnote 2 applies (dropout frequency foldback) 6
Minimum switch on-time tON-MIN 60 ns IOUT=1A 6
Minimum switch off-time tOFF-MIN 110 ns IOUT=1A 6
Internal soft-start time tSS 1.8 ms 6
Junction-to-ambient thermal resistance RθJA 173 °C/W JESD 51-7, simulated on 4-layer JEDEC board; not valid for design purposes 4
Junction-to-case (top) thermal resistance RθJC(top) 116 °C/W JESD 51-7, simulated on 4-layer JEDEC board 4
Junction-to-board thermal resistance RθJB 31 °C/W JESD 51-7, simulated on 4-layer JEDEC board 4
Junction-to-top characterization parameter ψJT 20 °C/W JESD 51-7, simulated on 4-layer JEDEC board 4
Junction-to-board characterization parameter ψJB 30 °C/W JESD 51-7, simulated on 4-layer JEDEC board 5

CAD (KiCad official)

  • Symbol: LMR50410Y3FQDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr50410y3fqdbvrq1-etched.step / lmr50410y3fqdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr50410y3fqdbvrq1.step / lmr50410y3fqdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 65ab961f308f6fad, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF