Generated by kicad-footprint-generator · KiCad file format 20260206
LMR50410Y3FQDBVRQ1
Texas Instruments · DC-DC Converters · SOT-23-6
LMR50410Y3FQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | power_in | Bootstrap capacitor connection for high-side FET driver; connect 100-nF high-quality capacitor from this pin to SW pin. |
| 2 | GND | power_in | Power ground connected to low-side FET source internally; connect to system ground and input/output capacitor grounds with shortest possible path. |
| 3 | FB | input | Feedback input to converter for output voltage setting via resistor divider; never short this terminal to ground during operation. |
| 4 | EN | input | Precision enable input to converter with high = on and low = off; do not float, can be tied to VIN for self-startup or used with external UVLO divider. |
| 5 | VIN | power_in | Supply input terminal to internal bias LDO and high-side FET, operating range 4V to 36V; connect input supply and bypass capacitors directly to this pin. |
| 6 | SW | output | Switching output of the converter internally connected to source of high-side FET and drain of low-side FET; connect to power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN to GND (recommended) | VIN | 4 | 36 | V | 4 | ||
| EN to GND (recommended) | 0 | V | Maximum is VIN; must not exceed VIN by more than 0.3 V (footnote 2) | 4 | |||
| Output voltage (recommended) | VOUT | 1 | 28 | V | Maximum VOUT ensured up to 90% of VIN in final production (footnote 4) | 4 | |
| Output current (recommended) | IOUT | 0 | 1 | A | 4 | ||
| Operating junction temperature range (recommended) | -40 | 150 | °C | Recommended operating junction temperature range | 4 | ||
| Input voltage VIN to GND (absolute maximum) | VIN | -0.3 | 38 | V | 4 | ||
| EN to GND (absolute maximum) | -0.3 | V | Maximum printed as VIN+0.3 V | 4 | |||
| FB to GND (absolute maximum) | FB | -0.3 | 5.5 | V | 4 | ||
| SW to GND (absolute maximum) | SW | -0.3 | V | Maximum printed as VIN+0.3 V | 4 | ||
| SW to GND less than 10-ns transients (absolute maximum) | SW | -3.5 | 38 | V | Less than 10-ns transients | 4 | |
| CB to SW (absolute maximum) | CB | -0.3 | 5.5 | V | CB to SW | 4 | |
| Junction temperature (absolute maximum) | TJ | -40 | 150 | °C | Over junction temperature range | 4 | |
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Human body model ESD rating | V(ESD) | -2500 | 2500 | V | Human body model (HBM), printed ±2500 V | 4 | |
| Charged device model ESD rating | V(ESD) | -750 | 750 | V | Charged device model (CDM), printed ±750 V | 4 | |
| Rising UVLO threshold | VIN_UVLO | 3.55 | 3.75 | 4 | V | 5 | |
| Falling UVLO threshold | VIN_UVLO | 3.25 | 3.45 | 3.65 | V | 5 | |
| Enable input high-level for VOUT | VEN-VOUT-H | 1.1 | 1.23 | 1.36 | V | VENABLE rising | 5 |
| Enable input low-level for VOUT | VEN-VOUT-L | 0.95 | 1.1 | 1.22 | V | VENABLE falling | 5 |
| Output voltage (3.3 V fixed option) | VOUT-3.3V-Fixed | 3.25 | 3.3 | 3.35 | V | Vin=12V | 5 |
| High-side current limit | ISC | 1.25 | 1.6 | 1.9 | A | Vin=12V | 5 |
| Low-side current limit | ILS-LIMIT | 0.9 | 1.1 | 1.3 | A | Vin=12V | 5 |
| Internal oscillator frequency | FOSC | 1.8 | 2.1 | 2.4 | MHz | 2.1-MHz variant | 6 |
| Adjustable output voltage regulation (FPWM operation) | VOUT | -1.5 | 1.5 | % | FPWM operation; deviation from nominal VOUT at VIN = 24 V, IOUT = 0 A to full load (footnote 1) | 6 | |
| Maximum switch duty cycle | DMAX | 98 | % | Footnote 2 applies (dropout frequency foldback) | 6 | ||
| Minimum switch on-time | tON-MIN | 60 | ns | IOUT=1A | 6 | ||
| Minimum switch off-time | tOFF-MIN | 110 | ns | IOUT=1A | 6 | ||
| Internal soft-start time | tSS | 1.8 | ms | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 173 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board; not valid for design purposes | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 116 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-board thermal resistance | RθJB | 31 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-top characterization parameter | ψJT | 20 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 4 | ||
| Junction-to-board characterization parameter | ψJB | 30 | °C/W | JESD 51-7, simulated on 4-layer JEDEC board | 5 |
CAD (KiCad official)
- Symbol:
LMR50410Y3FQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr50410y3fqdbvrq1-etched.step/lmr50410y3fqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr50410y3fqdbvrq1.step/lmr50410y3fqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
65ab961f308f6fad, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).