main
Ray
Publish 0.1.1
4181831
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197
{
"slug": "lmr36510addar",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lmr36510addar",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lmr36510addar.kicad_sym",
"lmr36510addar.kicad_mod",
"lmr36510addar.glb",
"lmr36510addar.step",
"lmr36510addar.lbr",
"docs/hero.png",
"docs/lmr36510addar-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lmr36510addar-hero.glb",
"lmr36510addar-hero.overlay.json",
"lmr36510addar-etched.step"
],
"component": {
"mpn": "LMR36510ADDAR",
"manufacturer": "Texas Instruments",
"package": "SOP-8-EP",
"pin_count": 9,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lmr36510",
"parts": {
"symbol": "lmr36510addar.kicad_sym",
"footprint": "lmr36510addar.kicad_mod",
"model_3d": "lmr36510addar-hero.glb",
"model_3d_plain": "lmr36510addar.glb",
"model_3d_step": "lmr36510addar-etched.step",
"model_3d_step_plain": "lmr36510addar.step",
"lbr": "lmr36510addar.lbr"
},
"distributor_links": {
"lcsc": "C1858393",
"digikey": "296-LMR36510ADDARTR-ND",
"mouser": "595-LMR36510ADDAR"
},
"distributor_check": {
"checked_at": "2026-10-03T01:16:26Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LMR36510ADDARTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-LMR36510ADDAR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PGND",
"type": "power_in",
"description": "Power and analog ground terminal; all electrical parameters are measured relative to this pin."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Input power supply (4.2V to 65V recommended); connect quality bypass capacitors directly to this pin and PGND."
},
{
"number": "3",
"name": "EN",
"type": "input",
"description": "Enable control input (0V to 65V); high level enables device, low level disables; do not leave open."
},
{
"number": "4",
"name": "PG",
"type": "output",
"description": "Open-drain power good flag output; pulled low when output voltage out of regulation or EN is low; drive through external current-limiting pull-up resistor."
},
{
"number": "5",
"name": "FB",
"type": "input",
"description": "Feedback input regulated to 1.0V reference; connect to output voltage feedback divider tap; do not leave open."
},
{
"number": "6",
"name": "VCC",
"type": "power_out",
"description": "Internal 5V LDO output (nominal 5.0V, range 4.75V to 5.25V); connect 1µF bypass capacitor to PGND; reserve for internal circuits only."
},
{
"number": "7",
"name": "BOOT",
"type": "power_out",
"description": "Bootstrap power supply for internal high-side gate driver; connect 100nF quality capacitor between BOOT and SW pin."
},
{
"number": "8",
"name": "SW",
"type": "output",
"description": "Regulator switch node (-0.3V to 70.3V maximum); driven by internal MOSFETs between VIN and GND; connect to power inductor."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad (exposed pad on bottom of DDA package) present in SOP-8-EP package; serves as primary th",
"exposed pad 9 added from the footprint"
],
"pages_sent": 28,
"cost_usd": 0.2294,
"at": "2026-10-03T01:15:54"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lmr36510",
"pages": 40,
"sha256": "ef3035185e1964f7",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lmr36510addar-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.55
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "fba1fcbf61a493b340fa9123dc2a28beb3237fc8fd7b85e1fec691fb7d316b98",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LMR36510ADDAR",
"brief": "Texas Instruments DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "SOP-8-EP",
"Category": "Power Management (PMIC)",
"Pins": "9"
}
},
"discovery_triggers": [
"lmr36510addar"
],
"discovery_pitch": "LMR36510ADDAR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}