main
Ray Publish 0.1.0 4e5d209
{
  "slug": "lmr36006brnxr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VQFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lmr36006brnxr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr36006brnxr.kicad_sym",
    "lmr36006brnxr.kicad_mod",
    "lmr36006brnxr.glb",
    "lmr36006brnxr.step",
    "lmr36006brnxr.lbr",
    "docs/hero.png",
    "docs/lmr36006brnxr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmr36006brnxr-hero.glb",
    "lmr36006brnxr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LMR36006BRNXR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-12(2x3)",
    "pin_count": 12,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmr36006.pdf",
    "parts": {
      "symbol": "lmr36006brnxr.kicad_sym",
      "footprint": "lmr36006brnxr.kicad_mod",
      "model_3d": "lmr36006brnxr-hero.glb",
      "model_3d_plain": "lmr36006brnxr.glb",
      "model_3d_step": "lmr36006brnxr-etched.step",
      "model_3d_step_plain": "lmr36006brnxr.step",
      "lbr": "lmr36006brnxr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1850367",
      "digikey": "296-LMR36006BRNXRTR-ND",
      "mouser": "595-LMR36006BRNXR"
    },
    "distributor_check": {
      "checked_at": "2026-11-20T16:31:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LMR36006BRNXRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LMR36006BRNXR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground terminal; connect to system ground and AGND, using short wide traces to CIN."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator; connect to CIN with short wide traces."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Connect this pin to SW on the PCB; it has no internal connection to the regulator."
      },
      {
        "number": "4",
        "name": "BOOT",
        "type": "power_out",
        "description": "Bootstrap supply for the internal high-side driver; connect a high-quality 100-nF capacitor from this pin to SW."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5-V LDO output used as supply for internal control circuits; do not connect to external loads and connect a high-quality 1-µF capacitor from this pin to GND."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground and reference for the regulator and system; all electrical parameters are measured with respect to this pin and it connects to system ground on the PCB."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Feedback input connected to the tap point of the feedback voltage divider; do not float and do not ground."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag output connected to a supply through a current-limiting resistor; it goes low when EN is low and may be left open or grounded when unused."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Enable input where high = ON and low = OFF; it can be connected directly to VIN but must not float."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator; connect to CIN with short wide traces."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground terminal; connect to system ground and AGND, using short wide traces to CIN."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switch node connected to the power inductor; connect it to pin 3 (NC) on the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives only the generic type P (Power) for BOOT, VCC and SW; the KiCad classes power_ou"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0358,
        "at": "2026-11-20T16:30:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmr36006.pdf",
        "pages": 52,
        "sha256": "ea379c3bee95861f",
        "source_tier": "mfr",
        "citation": "Texas Instruments datasheet"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 12,
        "described": 12,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr36006brnxr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.02,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.063,
        "footprint_binding": "identity",
        "sha256": "8e3a6db2da96d565583f9b91ec13d74d5e39affcd0c7503771eaa1c987ea6734",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr36006brnxr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.02,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.063,
        "footprint_binding": "identity",
        "sha256": "2c4cd25fb8c909b443b294e03e4645f864d355ad5c26d8935050ff61af1b9d41",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}