main
Ray lmr33640addar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d860cf8
{
  "slug": "lmr33640addar",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Global Sourcing Parts, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "lmr33640addar",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr33640addar.kicad_sym",
    "lmr33640addar.kicad_mod",
    "lmr33640addar.glb",
    "lmr33640addar.step",
    "lmr33640addar.lbr",
    "docs/hero.png",
    "docs/lmr33640addar-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LMR33640ADDAR",
    "manufacturer": "Texas Instruments",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lmr33640",
    "parts": {
      "symbol": "lmr33640addar.kicad_sym",
      "footprint": "lmr33640addar.kicad_mod",
      "model_3d": "lmr33640addar-etched.glb",
      "model_3d_plain": "lmr33640addar.glb",
      "model_3d_step": "lmr33640addar-etched.step",
      "model_3d_step_plain": "lmr33640addar.step",
      "lbr": "lmr33640addar.lbr"
    },
    "distributor_links": {
      "lcsc": "C2836966"
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground terminal; connect to system ground and AGND with short wide traces to the bypass capacitor."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator; connect a high-quality bypass capacitor directly from this pin to PGND."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input to the regulator; high = ON, low = OFF, can be tied directly to VIN but must not be left floating."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag output requiring an external pull-up resistor; high = power OK, low = power bad, and pulls low when EN is low; may be left open when unused."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the regulator; connect to the tap point of the output feedback voltage divider and must not be left floating or grounded."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5-V LDO output used to supply internal control circuits; do not connect external loads, connect a high-quality 1-µF capacitor from this pin to PGND."
      },
      {
        "number": "7",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap supply voltage for the internal high-side driver; connect a high-quality 100-nF capacitor from this pin to the SW pin."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Regulator switch node; connect to the power inductor."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground/thermal pad on the bottom of the device; serves as the ground reference for internal references and logic and as the thermal connection to the PCB heat-sink ground plane; must be soldered to a ground plane for proper electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 44,
        "cost_usd": 0.4556,
        "at": "2026-09-23T00:49:44"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lmr33640",
        "pages": 44,
        "sha256": "6df39cb52faaed45",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr33640addar.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr33640addar-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5915e7b8c25e642b552bff9aada0fccce3c11b75d9fb21be8a4f43993ecfe421",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}