main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmr33640addar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lmr33640addar: viewers · Ray
lmr33640addar-etched.fit.json lmr33640addar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr33640addar-etched.glb lmr33640addar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr33640addar-etched.step lmr33640addar: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmr33640addar.glb Publish 0.1.0 · Ray
lmr33640addar.kicad_mod Publish 0.1.0 · Ray
lmr33640addar.kicad_sym Publish 0.1.0 · Ray
lmr33640addar.lbr Publish 0.1.0 · Ray
lmr33640addar.step Publish 0.1.0 · Ray
package.json lmr33640addar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lmr33640addar: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lmr33640addar · Ray

LMR33640ADDAR

Texas Instruments · Global Sourcing Parts · ESOP-8

LMR33640ADDAR from Texas Instruments, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground terminal; connect to system ground and AGND with short wide traces to the bypass capacitor.
2 VIN power_in Input supply to the regulator; connect a high-quality bypass capacitor directly from this pin to PGND.
3 EN input Enable input to the regulator; high = ON, low = OFF, can be tied directly to VIN but must not be left floating.
4 PG output Open-drain power-good flag output requiring an external pull-up resistor; high = power OK, low = power bad, and pulls low when EN is low; may be left open when unused.
5 FB input Feedback input to the regulator; connect to the tap point of the output feedback voltage divider and must not be left floating or grounded.
6 VCC power_out Internal 5-V LDO output used to supply internal control circuits; do not connect external loads, connect a high-quality 1-µF capacitor from this pin to PGND.
7 BOOT passive Bootstrap supply voltage for the internal high-side driver; connect a high-quality 100-nF capacitor from this pin to the SW pin.
8 SW output Regulator switch node; connect to the power inductor.
9 AGND power_in Analog ground/thermal pad on the bottom of the device; serves as the ground reference for internal references and logic and as the thermal connection to the PCB heat-sink ground plane; must be soldered to a ground plane for proper electrical and thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package ESOP-8
Category Global Sourcing Parts
Pins 9

CAD (KiCad official)

  • Symbol: LMR33640ADDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmr33640addar-etched.step / lmr33640addar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr33640addar.step / lmr33640addar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 6df39cb52faaed45, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF