main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmr16006yq3ddctq1: viewers rendered from the public page · Ray
lmr16006yq3ddctq1-etched.glb Publish 0.1.0 · Ray
lmr16006yq3ddctq1-etched.step lmr16006yq3ddctq1: factory component page (tier=mfr) · Ray
lmr16006yq3ddctq1-hero.glb lmr16006yq3ddctq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr16006yq3ddctq1-hero.overlay.json Publish 0.1.0 · Ray
lmr16006yq3ddctq1.glb Publish 0.1.0 · Ray
lmr16006yq3ddctq1.kicad_mod Publish 0.1.0 · Ray
lmr16006yq3ddctq1.kicad_sym Publish 0.1.0 · Ray
lmr16006yq3ddctq1.lbr Publish 0.1.0 · Ray
lmr16006yq3ddctq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

LMR16006YQ3DDCTQ1

Texas Instruments · DC-DC Converters · TSOT-23-6

LMR16006YQ3DDCTQ1 from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB input Switch FET gate bias voltage; the Cboot capacitor connects between CB and SW.
2 GND power_in Ground connection for the device.
3 FB input Feedback input that sets the output voltage through the divider ratio VOUT = VFB (1 + R1/R2).
4 SHDN input High-voltage-tolerant enable input with an internal pull-up current source; pull below 1.25 V to disable, float to enable, and use a two-resistor divider to set input undervoltage lockout.
5 VIN power_in Power input voltage pin that supplies the internal circuitry and is the drain node input for the internal high-side MOSFET.
6 SW output Switch node that connects to the inductor, the catch diode, and the Cboot capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN operating input voltage VIN 4 40 V 5
Rising SHDN threshold voltage VSHDN_Thre 1.05 1.25 1.38 V 5
Feedback voltage VFB 0.747 0.765 0.782 V 5
Output voltage, fixed 3.3 V output version VOUT 3.201 3.3 3.399 V Fixed 3.3 V output version 5
Switching frequency fSW 1785 2100 2415 kHz 5
Peak current limit ILIMIT 1200 1700 mA VIN = 12 V, TJ = 25°C 5
Shutdown input current ISHDN 1 3 µA VEN = 0 V 5
Input current at SHDN ISHDN -4.2 µA SHDN = 2.3 V 5
Input current at SHDN ISHDN -1 µA SHDN = 0.9 V 5
Hysteresis current ISHDN_HYS -3 µA 5
Operating quiescent current (non-switching) IQ 28 µA no load, VIN = 12 V 5
On-resistance RDS_ON 900 mΩ VIN = 12 V, CB to SW = 5.8 V 5
Undervoltage lockout rising threshold UVLO 4 V Rising threshold 5
Undervoltage lockout falling threshold UVLO 3 V Falling threshold 5
Thermal shutdown threshold TSHDN 170 ºC Ensured by design 5
Thermal shutdown hysteresis THYS 10 ºC Ensured by design 5
Minimum turn-on time TON_MIN 80 ns fSW = 2.1 MHz; ensured by design 5
Maximum duty cycle DMAX 97 % 5
VIN to GND -0.3 65 V 4
SHDN to GND -0.3 65 V 4
FB to GND -0.3 7 V 4
CB to SW -0.3 7 V 4
SW to GND -1 60 V 4
SW to GND transients -2 60 V less than 30 ns transients 4
Operation junction temperature TJ -40 150 °C Operation 4
Storage temperature Tstg -55 165 °C 4
VIN input voltage VIN 4 40 V 4
CB voltage CB 4 46 V 4
CB to SW voltage -0.3 6 V 4
SW voltage SW -1 40 V 4
FB voltage FB 0 5.5 V 4
SHDN voltage SHDN 0 40 V 4
Operating junction temperature range TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 102 °C/W DDC (SOT) 6-pin, JEDEC board, still air 4
Junction-to-case (top) thermal resistance RθJCtop 36.9 °C/W DDC (SOT) 6-pin, JEDEC board, still air 4
Junction-to-board characterization parameter RθJB 28.4 °C/W DDC (SOT) 6-pin, JEDEC board, still air 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper to minimize coupling noise into the feedback pin. 2. The input bypass capacitor Cin must be placed close to the VIN pin. This will reduce copper trace resistance 15

CAD (KiCad official)

  • Symbol: LMR16006YQ3DDCTQ1
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr16006yq3ddctq1-etched.step / lmr16006yq3ddctq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr16006yq3ddctq1.step / lmr16006yq3ddctq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 ba6e4a9332e01ff2, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF