main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmr14050ssqddarq1: viewers · Ray
lmr14050ssqddarq1-etched.glb Publish 0.1.0 · Ray
lmr14050ssqddarq1-etched.step lmr14050ssqddarq1: factory component page (tier=mfr) · Ray
lmr14050ssqddarq1-hero.glb lmr14050ssqddarq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lmr14050ssqddarq1-hero.overlay.json Publish 0.1.0 · Ray
lmr14050ssqddarq1.glb Publish 0.1.0 · Ray
lmr14050ssqddarq1.kicad_mod Publish 0.1.0 · Ray
lmr14050ssqddarq1.kicad_sym Publish 0.1.0 · Ray
lmr14050ssqddarq1.lbr Publish 0.1.0 · Ray
lmr14050ssqddarq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LMR14050SSQDDARQ1

Texas Instruments · DC-DC Converters · ESOP-8

LMR14050SSQDDARQ1 from Texas Instruments, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT passive Bootstrap capacitor connection for the high-side MOSFET driver; connect a high quality 0.1 µF capacitor from BOOT to SW.
2 VIN power_in Connect to power supply and bypass capacitors CIN; the path from VIN to the high frequency bypass CIN and GND must be as short as possible (4V to 40V operating).
3 EN input Enable pin with internal pull-up current source; pull below 1.2 V to disable, float or connect to VIN to enable, and use two resistors to adjust the input undervoltage lockout.
4 RT/SYNC input Resistor timing or external clock input; a resistor to ground sets the switching frequency, and pulling the pin above the PLL upper threshold makes it a high impedance synchronization clock input.
5 FB input Feedback input connected to the feedback divider to set VOUT; do not short this pin to ground during operation.
6 SS passive Soft-start control pin; connect a capacitor to set the soft-start time.
7 GND power_in System ground pin.
8 SW power_out Switching output of the regulator, internally connected to the high-side power MOSFET; connect to the power inductor.
9 Thermal Pad power_in Major heat dissipation path of the die; must be connected to the ground plane on the PCB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package ESOP-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN, EN to GND VIN -0.3 44 V 4
BOOT to GND BOOT -0.3 49 V 4
SS to GND SS -0.3 5 V 4
FB to GND (DDA package) FB -0.3 5.5 V 4
RT/SYNC to GND RT/SYNC -0.3 3.6 V 4
BOOT to SW (DDA package) BOOT-SW 5.5 V 4
SW to GND SW -3 44 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V HBM, per AEC Q100-002 4
ESD CDM V(ESD) -750 750 V CDM, per AEC Q100-011 4
Input voltage VIN 4 40 V 4
Output voltage VOUT 0.8 28 V 4
BOOT voltage BOOT 45 V 4
SW voltage SW -1 40 V 4
FB voltage FB 0 5 V 4
EN voltage EN 0 40 V 4
RT/SYNC voltage RT/SYNC 0 3.3 V 4
SS voltage SS 0 3 V 4
PGOOD to GND PGOOD 0 5 V 4
Switching frequency range at RT mode fSW 200 2500 kHz 4
Switching frequency range at SYNC mode fSW 250 2300 kHz 4
Operating junction temperature TJ -40 125 °C 4
Operation input voltage VIN 4 40 V 5
UVLO rising threshold UVLO 3.5 3.7 3.9 V Rising threshold 5
UVLO hysteresis UVLO 285 mV Hysteresis 5
Shutdown supply current ISHDN 1 3 μA VEN = 0 V, TJ = 25°C, 4.0 V ≤ VIN ≤ 40 V 5
Operating quiescent current (non-switching) IQ 40 μA VFB = 1.0 V, TJ = 25°C 5
EN threshold voltage VEN_TH 1.05 1.2 1.38 V 5
EN pin current IEN_PIN -4.6 μA Enable threshold +50 mV 5
EN pin current IEN_PIN -1 μA Enable threshold -50 mV 5
EN hysteresis current IEN_HYS -3.6 μA 5
SS pin current ISS -3 μA TJ = 25°C 5
PGOOD leakage current at high level output IPG 10 200 nA VPull-Up = 5 V 5
PGOOD low level output voltage VPG_LOW 0.1 V IPull-Up = 1 mA 5
Minimum VIN for valid PGOOD output VIN_PG_MIN 1.6 1.95 V VPull-Up < 5 V at IPull-Up = 100 μA 5
Feedback voltage VFB 0.744 0.75 0.756 V TJ = 25°C 5
Feedback voltage VFB 0.735 0.75 0.765 V TJ = -40 °C to 125 °C 5
High-side MOSFET on-resistance RDS_ON 90 180 mΩ VIN = 12 V 6
High-side MOSFET current limit ILIMT 5.8 7.9 10.9 A VIN = 12 V, TJ = -40°C to 125°C, Open Loop 6
Thermal shutdown threshold TSHDN 170 °C 6
Thermal shutdown hysteresis THYS 12 °C 6
Switching frequency fSW 1758 1912 2066 kHz RT = 11.5 kΩ 6
Switching frequency range at SYNC mode fSW 250 2300 kHz 6
Switching frequency dithering FDITHER -6 6 % Spread spectrum option, frequency dithering over center frequency 6
SYNC clock high level threshold VSYNC_HI 1.7 V 6
SYNC clock low level threshold VSYNC_LO 0.5 V 6
Minimum SYNC input pulse width TSYNC_MIN 30 ns Measured at 500 kHz, VSYNC_HI > 3 V, VSYNC_LO < 0.3 V 6
PLL lock in time TLOCK_IN 100 µs Measured at 500 kHz 6
Minimum controllable on time TON_MIN 75 ns VIN = 12 V, ILoad = 1 A 6
Maximum duty cycle DMAX 97 % fSW = 200 kHz 6
Junction-to-ambient thermal resistance RθJA 43.2 °C/W DDA (HSOIC) 8 pins 5
Junction-to-top characterization parameter ψJT 5.2 °C/W DDA (HSOIC) 8 pins 5
Junction-to-board characterization parameter ψJB 16.4 °C/W DDA (HSOIC) 8 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 52.1 °C/W DDA (HSOIC) 8 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.8 °C/W DDA (HSOIC) 8 pins 5
Junction-to-board thermal resistance RθJB 16.4 °C/W DDA (HSOIC) 8 pins 5

CAD (KiCad official)

  • Symbol: LMR14050SSQDDARQ1
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmr14050ssqddarq1-etched.step / lmr14050ssqddarq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr14050ssqddarq1.step / lmr14050ssqddarq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 cefdbbf1b3380e4f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF