main
Ray
lmr14030ssqddarq1: specified limits as data (metadata.characteristics, 41 rows from the datasheet)
e70fb2f
LMR14030SSQDDARQ1
Texas Instruments · DC-DC Converters · SOIC-8-EP
LMR14030SSQDDARQ1 from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor connection to high-side MOSFET driver; connect 0.1µF capacitor between BOOT and SW pins. |
| 2 | VIN | power_in | Connection to power supply and bypass capacitor CIN with input voltage range 4V to 40V; maintain shortest path from VIN pin to high-frequency bypass capacitor and GND. |
| 3 | EN | input | Enable pin with internal pull-up current source; pull below 1.2V to disable device, leave floating or connect to VIN to enable; UVLO threshold adjustable with two resistors. |
| 4 | RT/SYNC | input | Resistor timing or external clock input; use external resistor to program switching frequency 200kHz to 2.5MHz, or apply external clock 250kHz to 2.3MHz with pull above PLL threshold. |
| 5 | FB | input | Feedback input pin connected to feedback voltage divider to set VOUT; do not short this pin to ground during operation. |
| 6 | SS | input | Soft-start control pin; connect to capacitor to set soft-start time. |
| 7 | GND | power_in | System ground pin. |
| 8 | SW | output | Switching output of regulator; internally connected to low-side power MOSFET; connect to power inductor. |
| 9 | Thermal Pad | power_in | Primary heat dissipation path of die; must be connected to PCB ground layer for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN,EN 至 GND | VIN, EN | -0.3 | 44 | V | 4 | ||
| BOOT 至 GND | -0.3 | 49 | V | 4 | |||
| SS 至 GND | -0.3 | 5 | V | 4 | |||
| FB 至 GND(DDA 封装) | FB | -0.3 | 5.5 | V | DDA 封装 | 4 | |
| RT/SYNC 至 GND | -0.3 | 3.6 | V | 4 | |||
| PGOOD 至 GND | -0.3 | 7 | V | 4 | |||
| BOOT 至 SW(DDA 封装) | 5.5 | V | DDA 封装 | 4 | |||
| SW 至 GND | -3 | 44 | V | 4 | |||
| TJ 结温 | TJ | -40 | 150 | °C | 4 | ||
| Tstg 贮存温度 | Tstg | -65 | 150 | °C | 4 | ||
| VIN 输入电压 | VIN | 4 | 40 | V | 4 | ||
| VOUT | VOUT | 0.8 | 28 | V | 4 | ||
| BOOT | 45 | V | 4 | ||||
| SW | -1 | 40 | V | 4 | |||
| FB | FB | 0 | 5 | V | 4 | ||
| EN | EN | 0 | 40 | V | 4 | ||
| RT/SYNC | 0 | 3.3 | V | 4 | |||
| SS | 0 | 3 | V | 4 | |||
| PGOOD 至 GND | 0 | 5 | V | 4 | |||
| RT 模式下的开关频率范围 | 200 | 2500 | kHz | RT 模式 | 4 | ||
| SYNC 模式下的开关频率范围 | 250 | 2300 | kHz | SYNC 模式 | 4 | ||
| 工作结温 TJ | TJ | -40 | 125 | °C | 4 | ||
| VIN 工作输入电压 | VIN | 4 | 40 | V | 5 | ||
| UVLO 欠压锁定阈值 上升阈值 | 3.5 | 3.7 | 3.9 | V | 上升阈值 | 5 | |
| ISHDN 关断电源电流 | ISHDN | 1 | 3 | μA | VEN = 0V,TJ = 25°C,4.0V ≤ VIN ≤ 40V | 5 | |
| EN 阈值电压 | VEN_TH | 1.05 | 1.2 | 1.38 | V | 5 | |
| VFB 反馈电压 | VFB | 0.744 | 0.75 | 0.756 | V | TJ = 25°C | 5 |
| VFB 反馈电压 | VFB | 0.735 | 0.75 | 0.765 | V | TJ = -40°C 至 125°C | 5 |
| PGOOD 泄漏电流 IPG(高电平输出) | IPG | 10 | 200 | nA | VPull-Up = 5V | 5 | |
| 有效 PGOOD 输出所需的最小 VIN | VIN_PG_MIN | 1.6 | 1.95 | V | IPull-Up = 100μA 时,VPull-Up < 5V | 5 | |
| RDS_ON 导通电阻 | RDS_ON | 90 | 180 | mΩ | VIN = 12V | 6 | |
| ILIMT 电流限制 | ILIMT | 4.1 | 5.5 | 7.7 | A | VIN = 12V,TJ = -40°C 至 125°C,开环 | 6 |
| fSW 开关频率 | fSW | 1758 | 1912 | 2066 | kHz | RT = 11.5kΩ | 6 |
| FDITHER 开关频率抖动(展频) | FDITHER | -6 | 6 | % | 展频选项,围绕中心频率的频率抖动 | 6 | |
| SYNC 模式下的开关频率范围 | 250 | 2300 | kHz | 6 | |||
| RθJA 结至环境热阻 | RθJA | 43.2 | °C/W | DDA (HSOIC) 8 引脚 | 5 | ||
| ψJT 结至顶部特征参数 | ψJT | 5.2 | °C/W | DDA (HSOIC) 8 引脚 | 5 | ||
| ψJB 结至电路板特征参数 | ψJB | 16.4 | °C/W | DDA (HSOIC) 8 引脚 | 5 | ||
| RθJC(top) 结至外壳(顶部)热阻 | RθJC(top) | 52.1 | °C/W | DDA (HSOIC) 8 引脚 | 5 | ||
| RθJC(bot) 结至外壳(底部)热阻 | RθJC(bot) | 7.8 | °C/W | DDA (HSOIC) 8 引脚 | 5 | ||
| RθJB 结至电路板热阻 | RθJB | 16.4 | °C/W | DDA (HSOIC) 8 引脚 | 5 |
CAD (KiCad official)
- Symbol:
LMR14030SSQDDARQ1 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
lmr14030ssqddarq1-etched.step/lmr14030ssqddarq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr14030ssqddarq1.step/lmr14030ssqddarq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
1f91b09fa6ebdebe, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMR14030SSQDDARQ1
**Texas Instruments** · DC-DC Converters · SOIC-8-EP
LMR14030SSQDDARQ1 from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor connection to high-side MOSFET driver; connect 0.1µF capacitor between BOOT and SW pins. |
| 2 | VIN | power_in | Connection to power supply and bypass capacitor CIN with input voltage range 4V to 40V; maintain shortest path from VIN pin to high-frequency bypass capacitor and GND. |
| 3 | EN | input | Enable pin with internal pull-up current source; pull below 1.2V to disable device, leave floating or connect to VIN to enable; UVLO threshold adjustable with two resistors. |
| 4 | RT/SYNC | input | Resistor timing or external clock input; use external resistor to program switching frequency 200kHz to 2.5MHz, or apply external clock 250kHz to 2.3MHz with pull above PLL threshold. |
| 5 | FB | input | Feedback input pin connected to feedback voltage divider to set VOUT; do not short this pin to ground during operation. |
| 6 | SS | input | Soft-start control pin; connect to capacitor to set soft-start time. |
| 7 | GND | power_in | System ground pin. |
| 8 | SW | output | Switching output of regulator; internally connected to low-side power MOSFET; connect to power inductor. |
| 9 | Thermal Pad | power_in | Primary heat dissipation path of die; must be connected to PCB ground layer for thermal and mechanical performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN,EN 至 GND | VIN, EN | -0.3 | | 44 | V | | 4 |
| BOOT 至 GND | | -0.3 | | 49 | V | | 4 |
| SS 至 GND | | -0.3 | | 5 | V | | 4 |
| FB 至 GND(DDA 封装) | FB | -0.3 | | 5.5 | V | DDA 封装 | 4 |
| RT/SYNC 至 GND | | -0.3 | | 3.6 | V | | 4 |
| PGOOD 至 GND | | -0.3 | | 7 | V | | 4 |
| BOOT 至 SW(DDA 封装) | | | | 5.5 | V | DDA 封装 | 4 |
| SW 至 GND | | -3 | | 44 | V | | 4 |
| TJ 结温 | TJ | -40 | | 150 | °C | | 4 |
| Tstg 贮存温度 | Tstg | -65 | | 150 | °C | | 4 |
| VIN 输入电压 | VIN | 4 | | 40 | V | | 4 |
| VOUT | VOUT | 0.8 | | 28 | V | | 4 |
| BOOT | | | | 45 | V | | 4 |
| SW | | -1 | | 40 | V | | 4 |
| FB | FB | 0 | | 5 | V | | 4 |
| EN | EN | 0 | | 40 | V | | 4 |
| RT/SYNC | | 0 | | 3.3 | V | | 4 |
| SS | | 0 | | 3 | V | | 4 |
| PGOOD 至 GND | | 0 | | 5 | V | | 4 |
| RT 模式下的开关频率范围 | | 200 | | 2500 | kHz | RT 模式 | 4 |
| SYNC 模式下的开关频率范围 | | 250 | | 2300 | kHz | SYNC 模式 | 4 |
| 工作结温 TJ | TJ | -40 | | 125 | °C | | 4 |
| VIN 工作输入电压 | VIN | 4 | | 40 | V | | 5 |
| UVLO 欠压锁定阈值 上升阈值 | | 3.5 | 3.7 | 3.9 | V | 上升阈值 | 5 |
| ISHDN 关断电源电流 | ISHDN | | 1 | 3 | μA | VEN = 0V,TJ = 25°C,4.0V ≤ VIN ≤ 40V | 5 |
| EN 阈值电压 | VEN_TH | 1.05 | 1.2 | 1.38 | V | | 5 |
| VFB 反馈电压 | VFB | 0.744 | 0.75 | 0.756 | V | TJ = 25°C | 5 |
| VFB 反馈电压 | VFB | 0.735 | 0.75 | 0.765 | V | TJ = -40°C 至 125°C | 5 |
| PGOOD 泄漏电流 IPG(高电平输出) | IPG | | 10 | 200 | nA | VPull-Up = 5V | 5 |
| 有效 PGOOD 输出所需的最小 VIN | VIN_PG_MIN | | 1.6 | 1.95 | V | IPull-Up = 100μA 时,VPull-Up < 5V | 5 |
| RDS_ON 导通电阻 | RDS_ON | | 90 | 180 | mΩ | VIN = 12V | 6 |
| ILIMT 电流限制 | ILIMT | 4.1 | 5.5 | 7.7 | A | VIN = 12V,TJ = -40°C 至 125°C,开环 | 6 |
| fSW 开关频率 | fSW | 1758 | 1912 | 2066 | kHz | RT = 11.5kΩ | 6 |
| FDITHER 开关频率抖动(展频) | FDITHER | -6 | | 6 | % | 展频选项,围绕中心频率的频率抖动 | 6 |
| SYNC 模式下的开关频率范围 | | 250 | | 2300 | kHz | | 6 |
| RθJA 结至环境热阻 | RθJA | | 43.2 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
| ψJT 结至顶部特征参数 | ψJT | | 5.2 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
| ψJB 结至电路板特征参数 | ψJB | | 16.4 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
| RθJC(top) 结至外壳(顶部)热阻 | RθJC(top) | | 52.1 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
| RθJC(bot) 结至外壳(底部)热阻 | RθJC(bot) | | 7.8 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
| RθJB 结至电路板热阻 | RθJB | | 16.4 | | °C/W | DDA (HSOIC) 8 引脚 | 5 |
## CAD (KiCad official)
- Symbol: `LMR14030SSQDDARQ1`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `lmr14030ssqddarq1-etched.step` / `lmr14030ssqddarq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmr14030ssqddarq1.step` / `lmr14030ssqddarq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmr14030-q1) (37 pp, sha256 `1f91b09fa6ebdebe`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmr14030ssqddarq1-datasheet.pdf)