LMR14020QDPRTQ1

{
  "slug": "lmr14020qdprtq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lmr14020qdprtq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmr14020qdprtq1.kicad_sym",
    "lmr14020qdprtq1.kicad_mod",
    "lmr14020qdprtq1.glb",
    "lmr14020qdprtq1.step",
    "lmr14020qdprtq1.lbr",
    "docs/hero.png",
    "docs/lmr14020qdprtq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmr14020qdprtq1-hero.glb",
    "lmr14020qdprtq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "LMR14020QDPRTQ1",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(4x4)",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lmr14020-q1",
    "parts": {
      "symbol": "lmr14020qdprtq1.kicad_sym",
      "footprint": "lmr14020qdprtq1.kicad_mod",
      "model_3d": "lmr14020qdprtq1-hero.glb",
      "model_3d_plain": "lmr14020qdprtq1.glb",
      "model_3d_step": "lmr14020qdprtq1-etched.step",
      "model_3d_step_plain": "lmr14020qdprtq1.step",
      "lbr": "lmr14020qdprtq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2071772",
      "digikey": "296-44760-2-ND",
      "mouser": "595-LMR14020QDPRTQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:31:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-44760-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LMR14020QDPRTQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "power_out",
        "description": "Bootstrap capacitor connection for the high-side MOSFET gate driver; connect a quality 0.1 µF X7R or X5R capacitor rated 16 V or higher between BOOT and SW."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for the regulator, operating from 4 V to 40 V; the path from VIN to the high-frequency bypass capacitor CIN and GND must be kept as short as possible."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for the regulator (second VIN pin, same connection as pin 2), operating from 4 V to 40 V; keep the path to CIN and GND as short as possible."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input with an internal pull-up current source; pulling it below 1.2 V disables the device, while leaving it floating or tying it to VIN enables it, and two resistors can set the input UVLO. EN absolute maximum is 44 V and recommended range is 0 V to 40 V."
      },
      {
        "number": "5",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Timing resistor connection or external clock input that sets the switching frequency (200 kHz to 2.5 MHz in RT mode, 250 kHz to 2.3 MHz when synchronized); it must not be left floating or shorted to ground, and a clock with high level ≥1.7 V, low level ≤0.5 V and pulse width >30 ns is required for sync."
      },
      {
        "number": "6",
        "name": "SS",
        "type": "input",
        "description": "Soft-start control pin; a capacitor from SS to GND sets the soft-start time using the internal ~3 µA charge current, and for the WSON package the maximum CSS is 4.7 nF."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Feedback input connected to the output divider that sets VOUT (VREF typically 0.75 V); connect directly to VOUT for a fixed output, and do not short this pin to ground during operation. The recommended FB range is 0 V to 5 V."
      },
      {
        "number": "8",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power-good flag that needs a pull-up of 10 kΩ to 100 kΩ to a logic rail or DC voltage, and the voltage on this pin must never exceed 7 V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "System ground pin for the regulator, to be connected to the system ground plane."
      },
      {
        "number": "10",
        "name": "SW",
        "type": "output",
        "description": "Regulator switching output, internally connected to the low-side power MOSFET, which connects to the power inductor; SW is rated from -3 V to 44 V."
      },
      {
        "number": "11",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "Exposed thermal pad that is the main heat-dissipation path from the die; it must be connected to a ground layer on the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package size check: the requested hint is WSON-10-EP (4x4). The datasheet's ordering table gives the; Pin 1 is BOOT for the WSON-10 package. Table 4-1 and Figure 4-2 agree on the pin numbers (FB=7, SS=6; Pin types were mapped from the datasheet's P/A/G codes to KiCad ERC classes: BOOT as power_out, SW a"
        ],
        "pages_sent": 27,
        "cost_usd": 0.1436,
        "at": "2026-10-08T15:30:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lmr14020-q1",
        "pages": 37,
        "sha256": "6e24800c10410b48",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmr14020qdprtq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          3.95,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ef3c2f392fea7049285bfc942095cbd03d5bb47d74597dd80d1bc887363be656",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmr14020qdprtq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          3.95,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc28c3cf318325bd5b560bedd06cd945901c65dcc1e5a8fc5a118396f6553882",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}