Generated by kicad-footprint-generator · KiCad file format 20260206
LMP8602MME
Texas Instruments · Current Sense Amplifiers · VSSOP-8
LMP8602MME from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative differential input; the input common-mode range is -22 V to 60 V at VS = 5 V (-4 V to 27 V at VS = 3.3 V), and absolute maximum common-mode is -25 V to 65 V. |
| 2 | GND | power_in | Power ground; the supply is specified with GND = 0 V and VS - GND must stay within the -0.3 V to 6 V absolute maximum rating. |
| 3 | A1 | output | Preamplifier output (gain of 10) brought out through the internal trimmed 100 kΩ resistor, allowing an external filter network or gain adjustment between A1 and A2; A1, A2, OFFSET and OUT are limited to (GND - 0.3 V) to (VS + 0.3 V). |
| 4 | A2 | input | Input of the output buffer, accepting the signal from the external filter network and/or A1; the buffer gain K2 is 2 for LMP8601, 5 for LMP8602 and 10 for LMP8603, with typical input bias current of ±2 pA. |
| 5 | OUT | output | Single-ended output of the amplifier, which should be limited to a maximum capacitive load of 100 pF without an isolation resistor. |
| 6 | VS | power_in | Positive supply voltage with an operating range of 3 V to 5.5 V; a 0.1 µF bypass capacitor should be placed between VS and GND as close to the pins as possible. |
| 7 | OFFSET | input | DC offset input that sets the output reference: tie to GND for unidirectional output, to VS for bidirectional mid-rail output, or drive from a source below 10 Ω to shift the output to between 0 and VS/2. |
| 8 | +IN | input | Positive differential input; the input common-mode range is -22 V to 60 V at VS = 5 V (-4 V to 27 V at VS = 3.3 V), and absolute maximum common-mode is -25 V to 65 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply range | VS | 3 | 5.5 | V | 3 | ||
| OFFSET voltage | VOFFSET | 0 | V | 3 | |||
| Ambient temperature (operating) | TA | -40 | 125 | °C | 3 | ||
| Supply voltage (VS, GND) | VS | -0.3 | 6 | V | 3 | ||
| Analog input common-mode voltage | VIN+, VIN- | -25 | 65 | V | Common-mode | 3 | |
| Analog input differential voltage | (VIN+), (VIN-) | -82 | 82 | V | Differential | 3 | |
| Ambient temperature | TA | -55 | 125 | °C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Common-mode input range (VS = 3.3V) | VCM | -4 | 27 | V | TA = -40°C to +125°C | 4 | |
| Input impedance common-mode, DGK (VS = 3.3V) | RCM | 250 | 350 | kΩ | -4V < VCM < 27V, TA = -40°C to +125°C | 4 | |
| Input impedance differential-mode, DGK (VS = 3.3V) | RDM | 500 | 700 | kΩ | -4V < VCM < 27V, TA = -40°C to +125°C | 4 | |
| Offset voltage, input referred (VS = 3.3V) | Vos | -1 | 0.15 | 1 | mV | VCM = VS / 2 | 4 |
| Offset voltage, input referred over temperature (VS = 3.3V) | Vos | -2 | 2 | mV | TA = -40°C to +125°C | 4 | |
| Offset voltage drift (VS = 3.3V) | dVos/dT | -10 | 10 | µV/℃ | TA = -40°C to +125°C | 4 | |
| Power supply rejection ratio, input referred (VS = 3.3V) | PSRR | -50 | 50 | µV/V | VCM = VS / 2, 3.0V ≤ VS ≤ 3.6V | 4 | |
| Total gain LMP8602 (VS = 3.3V) | AV | 49.75 | 50 | 50.25 | V/V | 4 | |
| Gain error (VS = 3.3V) | GERR | -0.5 | 0.5 | % | 4 | ||
| Gain error drift (VS = 3.3V) | GERR | -20 | 2.7 | 20 | ppm/°C | TA = -40°C to +125°C | 4 |
| Supply current over temperature (VS = 3.3V) | IS | 0.45 | 1.3 | mA | TA = -40°C to +125°C | 4 | |
| Midscale offset scaling accuracy, reference divider LMP8602 (VS = 3.3V) | -1 | 0.25 | 1 | % | 4 | ||
| Preamplifier gain (VS = 3.3V) | K1 | 9.95 | 10 | 10.05 | V/V | 4 | |
| Preamplifier offset voltage, input referred (VS = 3.3V) | Vos_P | -1 | 0.15 | 1 | mV | VCM = VS / 2 | 4 |
| Preamplifier output impedance resistor over temperature (VS = 3.3V) | RF-INT | 99 | 101 | kΩ | TA = -40°C to +125°C | 5 | |
| Preamplifier output impedance resistor drift (VS = 3.3V) | TCRF-INT | -50 | 5 | 50 | ppm/°C | TA = -40°C to +125°C | 5 |
| Buffer stage input offset voltage, input referred (VS = 3.3V) | Vos_B | -2 | 0.5 | 2 | mV | 0 V ≤ VCM ≤ VS | 5 |
| Output buffer gain LMP8602 (VS = 3.3V) | K2 | 4.975 | 5 | 5.025 | V/V | 5 | |
| Input bias current of A2 (VS = 3.3V) | IB_B | -2 | 2 | pA | 5 | ||
| Input bias current of A2 over temperature (VS = 3.3V) | IB_B | -20 | 20 | nA | TA = -40°C to +125°C | 5 | |
| Output short-circuit current, sourcing (VS = 3.3V) | ISC | -60 | -38 | -25 | mA | Sourcing, VIN = VS, VOUT = GND | 5 |
| Output short-circuit current, sinking (VS = 3.3V) | ISC | 30 | 46 | 65 | mA | Sinking, VIN = GND, VOUT = VS | 5 |
| Common-mode input range (VS = 5V) | VCM | -22 | 60 | V | TA = -40°C to +125°C | 5 | |
| Input impedance common-mode, DGK (VS = 5V) | RCM | 250 | 350 | kΩ | 0V < VCM < 60V, TA = -40°C to +125°C | 5 | |
| Input impedance common-mode, DGK (VS = 5V, negative VCM) | RCM | 165 | 250 | kΩ | -20V < VCM < 0V, TA = -40°C to +125°C | 5 | |
| Input impedance differential-mode, DGK (VS = 5V) | RDM | 500 | 700 | kΩ | 0V < VCM < 60V, TA = -40°C to +125°C | 6 | |
| Input impedance differential-mode, DGK (VS = 5V, negative VCM) | RDM | 300 | 500 | kΩ | -20V < VCM < 0V, TA = -40°C to +125°C | 6 | |
| Offset voltage, input referred (VS = 5V) | Vos | -1 | 0.15 | 1 | mV | VCM = VS / 2 | 6 |
| Offset voltage, input referred over temperature (VS = 5V) | Vos | -2 | 2 | mV | TA = -40°C to +125°C | 6 | |
| Offset voltage drift (VS = 5V) | dVos/dT | -10 | 10 | µV/℃ | TA = -40°C to +125°C | 6 | |
| Power supply rejection ratio, input referred (VS = 5V) | PSRR | -32 | 32 | µV/V | VCM = VS / 2, 4.5V ≤ VS ≤ 5.5V | 6 | |
| Total gain LMP8602 (VS = 5V) | AV | 49.75 | 50 | 50.25 | V/V | 6 | |
| Gain error (VS = 5V) | GERR | -0.5 | 0.5 | % | 6 | ||
| Gain error drift (VS = 5V) | GERR | -20 | 2.8 | 20 | ppm/°C | TA = -40°C to +125°C | 6 |
| Supply current over temperature (VS = 5V) | IS | 0.45 | 1.5 | mA | TA = -40°C to +125°C | 6 | |
| Midscale offset scaling accuracy, reference divider LMP8602 (VS = 5V) | -1 | 0.25 | 1 | % | 6 | ||
| Preamplifier gain (VS = 5V) | K1 | 9.95 | 10 | 10.05 | V/V | 6 | |
| Preamplifier offset voltage, input referred (VS = 5V) | Vos_P | -1 | 0.15 | 1 | mV | VCM = VS / 2 | 6 |
| Preamplifier output impedance resistor over temperature (VS = 5V) | RF-INT | 99 | 101 | kΩ | TA = -40°C to +125°C | 6 | |
| Preamplifier output impedance resistor drift (VS = 5V) | TCRF-INT | -50 | 5 | 50 | ppm/°C | TA = -40°C to +125°C | 6 |
| Buffer stage input offset voltage, input referred (VS = 5V) | Vos_B | -2 | 0.5 | 2 | mV | 0 V ≤ VCM ≤ VS | 7 |
| Output buffer gain LMP8602 (VS = 5V) | K2 | 4.975 | 5 | 5.025 | V/V | 7 | |
| Input bias current of A2 (VS = 5V) | IB_B | -2 | 2 | pA | 7 | ||
| Input bias current of A2 over temperature (VS = 5V) | IB_B | -20 | 20 | nA | TA = -40°C to +125°C | 7 | |
| Output short-circuit current, sourcing (VS = 5V) | ISC | -60 | -42 | -25 | mA | Sourcing, VIN = VS, VOUT = GND | 7 |
| Output short-circuit current, sinking (VS = 5V) | ISC | 30 | 48 | 65 | mA | Sinking, VIN = GND, VOUT = VS | 7 |
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 171.1 | °C/W | DGK (VSSOP) package | 3 | ||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 64.1 | °C/W | DGK (VSSOP) package | 3 | ||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 91.1 | °C/W | DGK (VSSOP) package | 3 | ||
| Junction-to-top characterization parameter (DGK, VSSOP-8) | ΨJT | 9.4 | °C/W | DGK (VSSOP) package | 3 | ||
| Junction-to-board characterization parameter (DGK, VSSOP-8) | ΨJB | 89.7 | °C/W | DGK (VSSOP) package | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | pin pad, and preferably on the same copper layer with minimal vias or connectors. This can be important around | 32 |
CAD (KiCad official)
- Symbol:
LMP8602MME - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmp8602mme-etched.step/lmp8602mme-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmp8602mme.step/lmp8602mme.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
8ae06e47592c609e, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).