Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMP8602MME

Texas Instruments · Current Sense Amplifiers · VSSOP-8

LMP8602MME from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 -IN input Negative differential input; the input common-mode range is -22 V to 60 V at VS = 5 V (-4 V to 27 V at VS = 3.3 V), and absolute maximum common-mode is -25 V to 65 V.
2 GND power_in Power ground; the supply is specified with GND = 0 V and VS - GND must stay within the -0.3 V to 6 V absolute maximum rating.
3 A1 output Preamplifier output (gain of 10) brought out through the internal trimmed 100 kΩ resistor, allowing an external filter network or gain adjustment between A1 and A2; A1, A2, OFFSET and OUT are limited to (GND - 0.3 V) to (VS + 0.3 V).
4 A2 input Input of the output buffer, accepting the signal from the external filter network and/or A1; the buffer gain K2 is 2 for LMP8601, 5 for LMP8602 and 10 for LMP8603, with typical input bias current of ±2 pA.
5 OUT output Single-ended output of the amplifier, which should be limited to a maximum capacitive load of 100 pF without an isolation resistor.
6 VS power_in Positive supply voltage with an operating range of 3 V to 5.5 V; a 0.1 µF bypass capacitor should be placed between VS and GND as close to the pins as possible.
7 OFFSET input DC offset input that sets the output reference: tie to GND for unidirectional output, to VS for bidirectional mid-rail output, or drive from a source below 10 Ω to shift the output to between 0 and VS/2.
8 +IN input Positive differential input; the input common-mode range is -22 V to 60 V at VS = 5 V (-4 V to 27 V at VS = 3.3 V), and absolute maximum common-mode is -25 V to 65 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply range VS 3 5.5 V 3
OFFSET voltage VOFFSET 0 V 3
Ambient temperature (operating) TA -40 125 °C 3
Supply voltage (VS, GND) VS -0.3 6 V 3
Analog input common-mode voltage VIN+, VIN- -25 65 V Common-mode 3
Analog input differential voltage (VIN+), (VIN-) -82 82 V Differential 3
Ambient temperature TA -55 125 °C 3
Junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
Common-mode input range (VS = 3.3V) VCM -4 27 V TA = -40°C to +125°C 4
Input impedance common-mode, DGK (VS = 3.3V) RCM 250 350 kΩ -4V < VCM < 27V, TA = -40°C to +125°C 4
Input impedance differential-mode, DGK (VS = 3.3V) RDM 500 700 kΩ -4V < VCM < 27V, TA = -40°C to +125°C 4
Offset voltage, input referred (VS = 3.3V) Vos -1 0.15 1 mV VCM = VS / 2 4
Offset voltage, input referred over temperature (VS = 3.3V) Vos -2 2 mV TA = -40°C to +125°C 4
Offset voltage drift (VS = 3.3V) dVos/dT -10 10 µV/℃ TA = -40°C to +125°C 4
Power supply rejection ratio, input referred (VS = 3.3V) PSRR -50 50 µV/V VCM = VS / 2, 3.0V ≤ VS ≤ 3.6V 4
Total gain LMP8602 (VS = 3.3V) AV 49.75 50 50.25 V/V 4
Gain error (VS = 3.3V) GERR -0.5 0.5 % 4
Gain error drift (VS = 3.3V) GERR -20 2.7 20 ppm/°C TA = -40°C to +125°C 4
Supply current over temperature (VS = 3.3V) IS 0.45 1.3 mA TA = -40°C to +125°C 4
Midscale offset scaling accuracy, reference divider LMP8602 (VS = 3.3V) -1 0.25 1 % 4
Preamplifier gain (VS = 3.3V) K1 9.95 10 10.05 V/V 4
Preamplifier offset voltage, input referred (VS = 3.3V) Vos_P -1 0.15 1 mV VCM = VS / 2 4
Preamplifier output impedance resistor over temperature (VS = 3.3V) RF-INT 99 101 kΩ TA = -40°C to +125°C 5
Preamplifier output impedance resistor drift (VS = 3.3V) TCRF-INT -50 5 50 ppm/°C TA = -40°C to +125°C 5
Buffer stage input offset voltage, input referred (VS = 3.3V) Vos_B -2 0.5 2 mV 0 V ≤ VCM ≤ VS 5
Output buffer gain LMP8602 (VS = 3.3V) K2 4.975 5 5.025 V/V 5
Input bias current of A2 (VS = 3.3V) IB_B -2 2 pA 5
Input bias current of A2 over temperature (VS = 3.3V) IB_B -20 20 nA TA = -40°C to +125°C 5
Output short-circuit current, sourcing (VS = 3.3V) ISC -60 -38 -25 mA Sourcing, VIN = VS, VOUT = GND 5
Output short-circuit current, sinking (VS = 3.3V) ISC 30 46 65 mA Sinking, VIN = GND, VOUT = VS 5
Common-mode input range (VS = 5V) VCM -22 60 V TA = -40°C to +125°C 5
Input impedance common-mode, DGK (VS = 5V) RCM 250 350 kΩ 0V < VCM < 60V, TA = -40°C to +125°C 5
Input impedance common-mode, DGK (VS = 5V, negative VCM) RCM 165 250 kΩ -20V < VCM < 0V, TA = -40°C to +125°C 5
Input impedance differential-mode, DGK (VS = 5V) RDM 500 700 kΩ 0V < VCM < 60V, TA = -40°C to +125°C 6
Input impedance differential-mode, DGK (VS = 5V, negative VCM) RDM 300 500 kΩ -20V < VCM < 0V, TA = -40°C to +125°C 6
Offset voltage, input referred (VS = 5V) Vos -1 0.15 1 mV VCM = VS / 2 6
Offset voltage, input referred over temperature (VS = 5V) Vos -2 2 mV TA = -40°C to +125°C 6
Offset voltage drift (VS = 5V) dVos/dT -10 10 µV/℃ TA = -40°C to +125°C 6
Power supply rejection ratio, input referred (VS = 5V) PSRR -32 32 µV/V VCM = VS / 2, 4.5V ≤ VS ≤ 5.5V 6
Total gain LMP8602 (VS = 5V) AV 49.75 50 50.25 V/V 6
Gain error (VS = 5V) GERR -0.5 0.5 % 6
Gain error drift (VS = 5V) GERR -20 2.8 20 ppm/°C TA = -40°C to +125°C 6
Supply current over temperature (VS = 5V) IS 0.45 1.5 mA TA = -40°C to +125°C 6
Midscale offset scaling accuracy, reference divider LMP8602 (VS = 5V) -1 0.25 1 % 6
Preamplifier gain (VS = 5V) K1 9.95 10 10.05 V/V 6
Preamplifier offset voltage, input referred (VS = 5V) Vos_P -1 0.15 1 mV VCM = VS / 2 6
Preamplifier output impedance resistor over temperature (VS = 5V) RF-INT 99 101 kΩ TA = -40°C to +125°C 6
Preamplifier output impedance resistor drift (VS = 5V) TCRF-INT -50 5 50 ppm/°C TA = -40°C to +125°C 6
Buffer stage input offset voltage, input referred (VS = 5V) Vos_B -2 0.5 2 mV 0 V ≤ VCM ≤ VS 7
Output buffer gain LMP8602 (VS = 5V) K2 4.975 5 5.025 V/V 7
Input bias current of A2 (VS = 5V) IB_B -2 2 pA 7
Input bias current of A2 over temperature (VS = 5V) IB_B -20 20 nA TA = -40°C to +125°C 7
Output short-circuit current, sourcing (VS = 5V) ISC -60 -42 -25 mA Sourcing, VIN = VS, VOUT = GND 7
Output short-circuit current, sinking (VS = 5V) ISC 30 48 65 mA Sinking, VIN = GND, VOUT = VS 7
Junction-to-ambient thermal resistance (DGK, VSSOP-8) RθJA 171.1 °C/W DGK (VSSOP) package 3
Junction-to-case (top) thermal resistance (DGK, VSSOP-8) RθJC(top) 64.1 °C/W DGK (VSSOP) package 3
Junction-to-board thermal resistance (DGK, VSSOP-8) RθJB 91.1 °C/W DGK (VSSOP) package 3
Junction-to-top characterization parameter (DGK, VSSOP-8) ΨJT 9.4 °C/W DGK (VSSOP) package 3
Junction-to-board characterization parameter (DGK, VSSOP-8) ΨJB 89.7 °C/W DGK (VSSOP) package 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pin pad, and preferably on the same copper layer with minimal vias or connectors. This can be important around 32

CAD (KiCad official)

  • Symbol: LMP8602MME
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmp8602mme-etched.step / lmp8602mme-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmp8602mme.step / lmp8602mme.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 8ae06e47592c609e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF