# LMP7712MME

**Texas Instruments** · Operational Amplifier · VSSOP-10-0.5mm

LMP7712MME from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A rail-to-rail output. |
| 2 | -IN A | input | Channel A inverting input. |
| 3 | +IN A | input | Channel A non-inverting input. |
| 4 | V- | power_in | Negative supply (ground in single-supply use); supply range is 1.8V to 5.5V total. |
| 5 | EN A | input | Channel A enable; enabled at VEN of 4.6V or higher and shutdown at VEN of 0.4V or lower (5V supply). |
| 6 | EN B | input | Channel B enable; enabled at VEN of 4.6V or higher and shutdown at VEN of 0.4V or lower (5V supply). |
| 7 | +IN B | input | Channel B non-inverting input. |
| 8 | -IN B | input | Channel B inverting input. |
| 9 | OUT B | output | Channel B rail-to-rail output. |
| 10 | V+ | power_in | Positive supply; supply range is 1.8V to 5.5V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Operational Amplifier/Comparator |
| Pins | 10 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (2.5V) | VOS | -180 | 20 | 180 | µV | V+=2.5V, TA=25°C; typ printed ±20 | 3 |
| Input Offset Voltage (2.5V, temp extremes) | VOS | -480 |  | 480 | µV | V+=2.5V, temperature extremes | 3 |
| Input Bias Current (2.5V) | IB |  | 0.05 | 1 | pA | VCM=1.0V, TA=25°C | 3 |
| Input Bias Current (2.5V, to 125°C) | IB |  | 0.05 | 100 | pA | VCM=1.0V, -40°C ≤ TA ≤ 125°C | 3 |
| Input Offset Current (2.5V) | IOS |  | 0.006 | 0.5 | pA | VCM=1.0V; 50 at temp extremes | 3 |
| Common Mode Rejection Ratio (2.5V) | CMRR | 83 | 100 |  | dB | 0V ≤ VCM ≤ 1.4V; 80 at temp extremes | 3 |
| Power Supply Rejection Ratio (2.5V table) | PSRR | 85 | 100 |  | dB | 2.0V ≤ V+ ≤ 5.5V, V-=0V, VCM=0; 80 at temp extremes | 3 |
| Common Mode Voltage Range (2.5V) | CMVR | -0.3 |  | 1.5 | V | CMRR ≥ 80 dB | 3 |
| Open Loop Voltage Gain LMP7712 (2.5V, 2k) | AVOL | 84 | 92 |  | dB | VO=0.15 to 2.2V, RL=2 kΩ to V+/2; 80 at extremes | 3 |
| Open Loop Voltage Gain LMP7712 (2.5V, 10k) | AVOL | 90 | 95 |  | dB | VO=0.15 to 2.2V, RL=10 kΩ to V+/2; 86 at extremes | 3 |
| Output Swing High (2.5V, 2k) | VOUT |  | 25 | 70 | mV | RL=2 kΩ to V+/2, from either rail; 77 at extremes | 3 |
| Output Swing High (2.5V, 10k) | VOUT |  | 20 | 60 | mV | RL=10 kΩ to V+/2, from either rail; 66 at extremes | 3 |
| Output Swing Low (2.5V, 2k) | VOUT |  | 30 | 70 | mV | RL=2 kΩ to V+/2, from either rail; 73 at extremes | 3 |
| Output Swing Low (2.5V, 10k) | VOUT |  | 15 | 60 | mV | RL=10 kΩ to V+/2, from either rail; 62 at extremes | 3 |
| Output Current Sourcing (2.5V) | IOUT | 36 | 52 |  | mA | Sourcing to V-, VIN=200 mV; 30 at extremes | 3 |
| Output Current Sinking (2.5V) | IOUT | 7.5 | 15 |  | mA | Sinking to V+, VIN=-200 mV; 5.0 at extremes | 3 |
| Supply Current LMP7712 per channel (2.5V) | IS |  | 1.1 | 1.5 | mA | Enable mode, VEN ≥ 2.1; 1.85 at extremes | 3 |
| Shutdown Supply Current per channel (2.5V) | IS |  | 0.03 | 1 | µA | VEN ≤ 0.4; 4 at extremes | 3 |
| Enable Pin Voltage, Enable Mode (2.5V) | VEN | 2.1 |  |  | V | Enable Mode; typ range 2 - 2.5 | 4 |
| Enable Pin Voltage, Shutdown Mode (2.5V) | VEN |  |  | 0.4 | V | Shutdown Mode; typ range 0 - 0.5 | 4 |
| Enable Pin Input Current (2.5V) | IEN |  | 1.5 | 3 | µA | VEN=2.5V | 4 |
| Input Offset Voltage (5V) | VOS | -150 | 10 | 150 | µV | V+=5V, TA=25°C; typ printed ±10 | 4 |
| Input Offset Voltage (5V, temp extremes) | VOS | -450 |  | 450 | µV | V+=5V, temperature extremes | 4 |
| Input Bias Current (5V) | IB |  | 0.1 | 1 | pA | VCM=2.0V, TA=25°C | 4 |
| Input Bias Current (5V, to 125°C) | IB |  | 0.1 | 100 | pA | VCM=2.0V, -40°C ≤ TA ≤ 125°C | 4 |
| Input Offset Current (5V) | IOS |  | 0.01 | 0.5 | pA | VCM=2.0V; 50 at temp extremes | 4 |
| Common Mode Rejection Ratio (5V) | CMRR | 85 | 100 |  | dB | 0V ≤ VCM ≤ 3.7V; 82 at temp extremes | 4 |
| Power Supply Rejection Ratio (5V table) | PSRR | 85 | 100 |  | dB | 2.0V ≤ V+ ≤ 5.5V, V-=0V, VCM=0; 80 at temp extremes | 4 |
| Common Mode Voltage Range (5V) | CMVR | -0.3 |  | 4 | V | CMRR ≥ 80 dB | 4 |
| Open Loop Voltage Gain LMP7712 (5V, 2k) | AVOL | 84 | 90 |  | dB | VO=0.3 to 4.7V, RL=2 kΩ to V+/2; 80 at extremes | 5 |
| Open Loop Voltage Gain LMP7712 (5V, 10k) | AVOL | 90 | 95 |  | dB | VO=0.3 to 4.7V, RL=10 kΩ to V+/2; 86 at extremes | 5 |
| Output Swing High (5V, 2k) | VOUT |  | 32 | 70 | mV | RL=2 kΩ to V+/2, from either rail; 77 at extremes | 5 |
| Output Swing High (5V, 10k) | VOUT |  | 22 | 60 | mV | RL=10 kΩ to V+/2, from either rail; 66 at extremes | 5 |
| Output Swing Low LMP7712 (5V, 2k) | VOUT |  | 50 | 75 | mV | RL=2 kΩ to V+/2, from either rail; 78 at extremes | 5 |
| Output Swing Low (5V, 10k) | VOUT |  | 20 | 60 | mV | RL=10 kΩ to V+/2, from either rail; 62 at extremes | 5 |
| Output Current Sourcing (5V) | IOUT | 46 | 66 |  | mA | Sourcing to V-, VIN=200 mV; 38 at extremes | 5 |
| Output Current Sinking (5V) | IOUT | 10.5 | 23 |  | mA | Sinking to V+, VIN=-200 mV; 6.5 at extremes | 5 |
| Supply Current LMP7712 per channel (5V) | IS |  | 1.3 | 1.7 | mA | Enable mode, VEN ≥ 4.6; 2.05 at extremes | 5 |
| Shutdown Supply Current per channel (5V) | IS |  | 0.14 | 1 | µA | VEN ≤ 0.4; 4 at extremes | 5 |
| Slew Rate Rising (5V) | SR | 6 | 9.5 |  | V/µs | AV=+1, Rising (10% to 90%) | 5 |
| Slew Rate Falling (5V) | SR | 7.5 | 11.5 |  | V/µs | AV=+1, Falling (90% to 10%) | 5 |
| Enable Pin Voltage, Enable Mode (5V) | VEN | 4.6 |  |  | V | Enable Mode; typ range 4.5, 5 | 5 |
| Enable Pin Voltage, Shutdown Mode (5V) | VEN |  |  | 0.4 | V | Shutdown Mode; typ range 0, 0.5 | 5 |
| Enable Pin Input Current (5V) | IEN |  | 5.6 | 10 | µA | VEN=5V | 5 |
| ESD Human Body Model |  |  |  | 2000 | V |  | 2 |
| ESD Machine Model |  |  |  | 200 | V |  | 2 |
| ESD Charge-Device Model |  |  |  | 1000 | V |  | 2 |
| Differential Input Voltage | VIN | -0.3 |  | 0.3 | V |  | 2 |
| Supply Voltage | VS |  |  | 6 | V | VS = V+, V- | 2 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 2 |
| Junction Temperature | TJ |  |  | 150 | °C |  | 2 |
| Operating Temperature Range |  | -40 |  | 125 | °C |  | 2 |
| Supply Voltage (0°C to 125°C) | VS | 1.8 |  | 5.5 | V | 0°C ≤ TA ≤ 125°C | 2 |
| Supply Voltage (-40°C to 125°C) | VS | 2 |  | 5.5 | V | -40°C ≤ TA ≤ 125°C | 2 |
| Package Thermal Resistance, 10-Pin VSSOP | θJA |  | 236 |  | °C/W | 10-Pin VSSOP | 2 |

## CAD (KiCad official)

- Symbol: `LMP7712MME`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files: `lmp7712mme-etched.step` / `lmp7712mme-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmp7712mme.step` / `lmp7712mme.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmp7712mme.pdf) (26 pp, sha256 `67c3b6cade0fa216`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lmp7712mme-datasheet.pdf)