main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lmk1d1208rhdr: viewers · Ray
lmk1d1208rhdr-etched.glb Publish 0.1.0 · Ray
lmk1d1208rhdr-etched.step lmk1d1208rhdr: factory component page (tier=mfr) · Ray
lmk1d1208rhdr-hero.glb lmk1d1208rhdr: hero GLB from the etched model (keeps the MPN mark) · Ray
lmk1d1208rhdr-hero.overlay.json Publish 0.1.0 · Ray
lmk1d1208rhdr.glb Publish 0.1.0 · Ray
lmk1d1208rhdr.kicad_mod Publish 0.1.0 · Ray
lmk1d1208rhdr.kicad_sym Publish 0.1.0 · Ray
lmk1d1208rhdr.lbr Publish 0.1.0 · Ray
lmk1d1208rhdr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 29 pins · Ray

LMK1D1208RHDR

Texas Instruments · Clock Buffers, Drivers · VQFN-28(5x5)

LMK1D1208RHDR from Texas Instruments, in a VQFN-28(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 OUT7_P output Positive side of differential LVDS output pair number 7.
3 OUT7_N output Negative side of differential LVDS output pair number 7.
4 IN_SEL input Input select with internal 500 kΩ pull-up and 320 kΩ pull-down: 0 selects IN0, 1 selects IN1, open disables the inputs and holds outputs at static logic low.
5 IN1_P input Secondary clock input, positive side of a differential pair or single-ended input.
6 IN1_N input Secondary clock input, negative side of a differential pair or single-ended input.
7 VAC_REF1 output Bias voltage output for capacitively coupled inputs; TI recommends a 0.1 µF capacitor to GND if used.
8 VDD power_in Device supply of 1.8 V, 2.5 V or 3.3 V (1.71 V to 3.465 V).
9 IN0_P input Primary clock input, positive side of a differential pair or single-ended input.
10 IN0_N input Primary clock input, negative side of a differential pair or single-ended input.
11 VAC_REF0 output Bias voltage output for capacitively coupled inputs; TI recommends a 0.1 µF capacitor to GND if used.
12 OUT0_P output Positive side of differential LVDS output pair number 0.
13 OUT0_N output Negative side of differential LVDS output pair number 0.
14 GND power_in Ground.
15 VDD power_in Device supply of 1.8 V, 2.5 V or 3.3 V (1.71 V to 3.465 V).
16 OUT1_P output Positive side of differential LVDS output pair number 1.
17 OUT1_N output Negative side of differential LVDS output pair number 1.
18 OUT2_P output Positive side of differential LVDS output pair number 2.
19 OUT2_N output Negative side of differential LVDS output pair number 2.
20 OUT3_P output Positive side of differential LVDS output pair number 3.
21 OUT3_N output Negative side of differential LVDS output pair number 3.
22 OUT4_P output Positive side of differential LVDS output pair number 4.
23 OUT4_N output Negative side of differential LVDS output pair number 4.
24 OUT5_P output Positive side of differential LVDS output pair number 5.
25 OUT5_N output Negative side of differential LVDS output pair number 5.
26 OUT6_P output Positive side of differential LVDS output pair number 6.
27 OUT6_N output Negative side of differential LVDS output pair number 6.
28 VDD power_in Device supply of 1.8 V, 2.5 V or 3.3 V (1.71 V to 3.465 V).
29 DAP power_in Die attach pad (exposed thermal pad) connected to GND; solder to the PCB ground plane for thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-28(5x5)
Category RTC/Clock Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 3.3V VDD 3.135 3.3 3.465 V 3.3V supply 8
Supply voltage 2.5V VDD 2.375 2.5 2.625 V 2.5V supply 8
Supply voltage 1.8V VDD 1.71 1.8 1.89 V 1.8V supply 8
Supply ramp time 0.1 20 ms Monotonic ramp (10-90% of VDD) 8
Operating ambient temperature TA -40 105 °C 8
Operating junction temperature TJ -40 135 °C 8
Supply voltage VDD -0.3 3.6 V 8
Input voltage VIN -0.3 3.6 V 8
Input current IIN -20 20 mA 8
Continuous output current IO -50 50 mA 8
Junction temperature TJ 135 °C 8
Storage temperature Tstg -65 150 °C Device unpowered 8
ESD HBM V(ESD) -3000 3000 V HBM, ANSI/ESDA/JEDEC JS-001, all pins 8
ESD CDM V(ESD) -1000 1000 V CDM, JESD22-C101, all pins 8
Junction-to-ambient thermal resistance RθJA 38.9 °C/W VQFN 28-pin (RHD) 9
Junction-to-case (top) thermal resistance RθJC(top) 32.1 °C/W VQFN 28-pin (RHD) 9
Junction-to-board thermal resistance RθJB 18.7 °C/W VQFN 28-pin (RHD) 9
Junction-to-top characterization parameter ΨJT 1 °C/W VQFN 28-pin (RHD) 9
Junction-to-board characterization parameter ΨJB 18.7 °C/W VQFN 28-pin (RHD) 9
Junction-to-case (bottom) thermal resistance RθJC(bot) 8.2 °C/W VQFN 28-pin (RHD) 9
Static supply current LMK1D1208 IDDSTAT 55 mA All outputs enabled and unterminated, f = 0Hz 9
Supply current at 100MHz LMK1D1208 IDD100M 78 95 mA All outputs enabled, RL = 100Ω, f = 100MHz 9
Three-state input open VdI3 0.4 V Open; 0.4 × VCC 9
Input low voltage VIL -0.3 0.3 V Max input voltage for logic 0 state; 0.3 × VCC max 9
Input high current (control) IIH 30 µA VDD can be 1.8V/2.5V/3.3V, VIH = VDD 9
Input low current (control) IIL -30 µA VDD can be 1.8V/2.5V/3.3V, VIH = VDD 9
Input pullup resistor Rpull-up(EN) 500 kΩ 9
Input pulldown resistor Rpull-down(EN) 320 kΩ 9
Input frequency (LVCMOS) fIN 0 250 MHz Clock input, DC to 250 MHz 9
Single-ended input voltage swing VIN_S-E 0.4 3.465 V Assumes square wave input with two levels 9
Input slew rate dVIN/dt 0.05 V/ns 20% to 80% of amplitude 9
Input high current (LVCMOS) IIH 50 µA VDD = 3.465V, VIH = 3.465V 9
Input low current (LVCMOS) IIL -30 µA VDD = 3.465V, VIL = 0V 9
Input capacitance (LVCMOS) CIN_SE 3.5 pF At 25°C 9
Input frequency (differential) fIN 2 GHz Clock input 9
Differential input voltage peak-to-peak VIN,DIFF(p-p) 0.3 2.4 VPP VICM = 1V (VDD = 1.8V) 9
Input common-mode voltage VICM 0.25 2.3 V VIN,DIFF(P-P) > 0.4V (VDD = 1.8V/2.5/3.3V) 9
Input high current (differential) IIH 30 µA VDD = 3.465V, VINP = 2.4V, VINN = 1.2V 10
Input low current (differential) IIL -30 µA VDD = 3.465V, VINP = 0V, VINN = 1.2V 10
Input capacitance (single-ended) CIN_S-E 3.5 pF At 25°C 10
Differential output voltage magnitude /VOD/ 250 350 450 mV VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω 10
Differential output voltage magnitude /VOD/ 400 500 650 mV VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 1 10
Change in VOD ΔVOD -15 15 mV VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω 10
Change in VOD ΔVOD -20 20 mV VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 1 10
Steady-state common-mode output voltage VOC(SS) 1 1.2 V VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω (VDD = 1.8V) 10
Steady-state common-mode output voltage VOC(SS) 1.1 1.375 V VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω (VDD = 2.5V/3.3V) 10
Change in steady-state common-mode output voltage ΔVOC(SS) -15 15 mV VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω 10
Output overshoot and undershoot Vring -0.1 0.1 VOD VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, fOUT = 491.52MHz 10
Output AC common mode VOS 50 100 mVpp VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω 10
Short-circuit output current (differential) IOS -12 12 mA VOUTP = VOUTN 10
Short-circuit output current (common mode) IOS(cm) -24 24 mA VOUTP = VOUTN = 0 10
Propagation delay tPD 0.3 0.575 ns VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω 10
Part-to-part skew tSK,PP 250 ps Same input and output load, same operating conditions 10
Pulse skew tSK,P -20 20 ps 50% duty cycle input, crossing point to crossing point distortion 10
Random additive jitter (rms) tRJIT(ADD) 50 60 fs, RMS fIN = 156.25MHz, 50% duty cycle, input slew rate = 1.5V/ns, integration range = 12kHz - 20MHz, RLOAD = 100Ω 10
Multiplexer isolation MUXISO 80 dB fIN = 156.25MHz 12
Output duty cycle ODC 45 55 % Input duty cycle 50% 12
Output rise and fall time tR/tF 300 ps 20% to 80%, RLOAD = 100Ω 12
Reference output voltage VAC_REF 0.9 1.25 1.375 V VDD = 2.5V, ILOAD = 100µA 12
Power supply noise rejection PSNR -70 dBc 10kHz, 100mVpp ripple on VDD, fcarrier = 156.25MHz, VDD = 2.5V/3.3V 12
Power supply noise rejection PSNR -50 dBc 1MHz, 100mVpp ripple on VDD, fcarrier = 156.25MHz, VDD = 2.5V/3.3V 12
Phase noise 1kHz offset PN1kHz -143 dBc/Hz 156.25MHz carrier, 50% duty cycle, input slew rate = 1.5V/ns, RLOAD = 100Ω 11
Phase noise 10kHz offset PN10kHz -152 dBc/Hz 156.25MHz carrier, 50% duty cycle, input slew rate = 1.5V/ns, RLOAD = 100Ω 11
Phase noise 100kHz offset PN100kHz -157 dBc/Hz 156.25MHz carrier, 50% duty cycle, input slew rate = 1.5V/ns, RLOAD = 100Ω 11
Phase noise 1MHz offset PN1MHz -160 dBc/Hz 156.25MHz carrier, 50% duty cycle, input slew rate = 1.5V/ns, RLOAD = 100Ω 11
Phase noise floor PNfloor -164 dBc/Hz 156.25MHz carrier, 50% duty cycle, input slew rate = 1.5V/ns, RLOAD = 100Ω 11

CAD (KiCad official)

  • Symbol: LMK1D1208RHDR
  • Footprint: Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm
  • 3D model: VQFN-28(5x5) (KiCad packages3D, STEP)
  • 3D model files: lmk1d1208rhdr-etched.step / lmk1d1208rhdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk1d1208rhdr.step / lmk1d1208rhdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 d94c1191598792aa, retrieved 2026-10-31, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF