main
Ray
Publish 0.1.1
b99ea0e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314
{
"slug": "lmh0318rtwr",
"version": "0.1.1",
"type": "component",
"description": "Texas Instruments Clock And Data Recovery / Retiming, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"rtc-clock chip",
"lmh0318rtwr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lmh0318rtwr.kicad_sym",
"lmh0318rtwr.kicad_mod",
"lmh0318rtwr.glb",
"lmh0318rtwr.step",
"lmh0318rtwr.lbr",
"docs/hero.png",
"docs/lmh0318rtwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lmh0318rtwr-hero.glb",
"lmh0318rtwr-hero.overlay.json",
"lmh0318rtwr-etched.step"
],
"component": {
"mpn": "LMH0318RTWR",
"manufacturer": "Texas Instruments",
"package": "WQFN-24-EP(4x4)",
"pin_count": 25,
"category": "RTC/Clock Chip",
"subcategory": "Clock And Data Recovery / Retiming",
"datasheet": "https://www.ti.com/cn/lit/gpn/lmh0318",
"parts": {
"symbol": "lmh0318rtwr.kicad_sym",
"footprint": "lmh0318rtwr.kicad_mod",
"model_3d": "lmh0318rtwr-hero.glb",
"model_3d_plain": "lmh0318rtwr.glb",
"model_3d_step": "lmh0318rtwr-etched.step",
"model_3d_step_plain": "lmh0318rtwr.step",
"lbr": "lmh0318rtwr.lbr"
},
"distributor_links": {
"lcsc": "C1849439",
"digikey": "296-LMH0318RTWRTR-ND",
"mouser": "595-LMH0318RTWR"
},
"distributor_check": {
"checked_at": "2026-10-10T23:55:29Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LMH0318RTWRTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LMH0318RTWR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "MODE_SEL",
"type": "input",
"description": "Four-level strap that selects the control interface: 1 kΩ to VDD selects SPI mode, and 1 kΩ to GND selects SMBus mode (20 kΩ to GND and float are reserved)."
},
{
"number": "2",
"name": "IN_OUT_SEL_SPI_SS_N_ADR0",
"type": "input",
"description": "In SPI mode this is the SPI slave select input (SPI_SS_N, with internal pull-up); in SMBus mode it is a four-level strap (ADDR0) that sets the SMBus address, read at power-up."
},
{
"number": "3",
"name": "EQ_SCL_SCK",
"type": "input",
"description": "In SPI mode this is the SPI serial clock input (2.5 V LVCMOS, 10 to 20 MHz SPI clock frequency); in SMBus mode it is the SMBus clock input, which is open drain, needs an external 2 kΩ to 5 kΩ pull-up, and is 3.3 V LVCMOS tolerant."
},
{
"number": "4",
"name": "OUT_CTRL_MOSI_SDA",
"type": "bidirectional",
"description": "In SPI mode this is the SPI master-output/slave-input data pin (MOSI, 2.5 V LVCMOS); in SMBus mode it is the open-drain SMBus data pin, which needs an external 2 kΩ to 5 kΩ pull-up and is 3.3 V LVCMOS tolerant."
},
{
"number": "5",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; no connect."
},
{
"number": "6",
"name": "ENABLE",
"type": "input",
"description": "Four-level pin: 1 kΩ to VDD gives normal operation, 1 kΩ to GND powers down the device including signal detects and resets registers at power-up, and the float and 20 kΩ to GND states are reserved."
},
{
"number": "7",
"name": "VDD",
"type": "power_in",
"description": "2.5 V supply, 2.5 V ±5% (2.375 V to 2.625 V)."
},
{
"number": "8",
"name": "IN1+",
"type": "input",
"description": "Non-inverting high-speed differential input for channel IN1, with an on-chip 100 Ω termination between IN1+ and IN1- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "9",
"name": "IN1-",
"type": "input",
"description": "Inverting high-speed differential input for channel IN1, with an on-chip 100 Ω termination between IN1+ and IN1- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "10",
"name": "VSS",
"type": "power_in",
"description": "Ground; connect directly to ground (GND)."
},
{
"number": "11",
"name": "IN0+",
"type": "input",
"description": "Non-inverting high-speed differential input for channel IN0, with an on-chip 100 Ω termination between IN0+ and IN0- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "12",
"name": "IN0-",
"type": "input",
"description": "Inverting high-speed differential input for channel IN0, with an on-chip 100 Ω termination between IN0+ and IN0- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "13",
"name": "LOS_INT_N",
"type": "output",
"description": "Open-drain interrupt output that pulls low on loss of signal, eye-monitor threshold violation, or CDR lock change; it needs an external 4.7 kΩ pull-up and is 3.3 V LVCMOS tolerant."
},
{
"number": "14",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; no connect."
},
{
"number": "15",
"name": "VOD_MISO_ADR1",
"type": "output",
"description": "In SPI mode this is the SPI master-input/slave-output data pin (MISO, 2.5 V LVCMOS); in SMBus mode it is a four-level strap (ADDR1) that sets the SMBus address, read at power-up."
},
{
"number": "16",
"name": "LOCK",
"type": "output",
"description": "2.5 V LVCMOS output that is high when the CDR is locked and low when it is not locked."
},
{
"number": "17",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; no connect."
},
{
"number": "18",
"name": "RESERVED",
"type": "unconnected",
"description": "Reserved pin; no connect."
},
{
"number": "19",
"name": "OUT0-",
"type": "output",
"description": "Inverting 75 Ω CML output for channel OUT0, with an on-chip 75 Ω termination to VDD and a required 4.7 µF AC coupling capacitor."
},
{
"number": "20",
"name": "OUT0+",
"type": "output",
"description": "Non-inverting 75 Ω CML output for channel OUT0, with an on-chip 75 Ω termination to VDD and a required 4.7 µF AC coupling capacitor."
},
{
"number": "21",
"name": "VDD",
"type": "power_in",
"description": "2.5 V supply, 2.5 V ±5% (2.375 V to 2.625 V)."
},
{
"number": "22",
"name": "OUT1-",
"type": "output",
"description": "Inverting high-speed differential output for channel OUT1, with an on-chip 100 Ω termination between OUT1+ and OUT1- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "23",
"name": "OUT1+",
"type": "output",
"description": "Non-inverting high-speed differential output for channel OUT1, with an on-chip 100 Ω termination between OUT1+ and OUT1- and a required 4.7 µF AC coupling capacitor."
},
{
"number": "24",
"name": "VSS",
"type": "power_in",
"description": "Ground; connect directly to ground (GND)."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: These pins have different functions in SPI and SMBus mode, and the mode is set by the MODE_SEL strap; The exposed pad is not given a numbered pin in the datasheet pin table, so it is listed as DAP. Veri; The datasheet lists these as RESERVED / No Connect. They are typed unconnected.",
"exposed pad 25 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 12,
"cost_usd": 0.0866,
"at": "2026-10-10T23:55:13"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lmh0318",
"pages": 57,
"sha256": "fca0f5c3e991f0d7",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lmh0318rtwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-10-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lmh0318rtwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e719af62988527f4492acbf5b1ab7e197ed1bdc48f100f184cfa8dba58a724b7",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LMH0318RTWR",
"brief": "Texas Instruments Clock And Data Recovery / Retiming, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WQFN-24-EP(4x4)",
"Category": "RTC/Clock Chip",
"Pins": "25"
}
},
"discovery_triggers": [
"lmh0318rtwr"
],
"discovery_pitch": "LMH0318RTWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}