main
History Download
Ray Publish 0.1.0 f68d2c4

LMH0318RTWR

Texas Instruments · Clock And Data Recovery / Retiming · WQFN-24-EP(4x4)

LMH0318RTWR from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MODE_SEL input Four-level strap that selects the control interface: 1 kΩ to VDD selects SPI mode, and 1 kΩ to GND selects SMBus mode (20 kΩ to GND and float are reserved).
2 IN_OUT_SEL_SPI_SS_N_ADR0 input In SPI mode this is the SPI slave select input (SPI_SS_N, with internal pull-up); in SMBus mode it is a four-level strap (ADDR0) that sets the SMBus address, read at power-up.
3 EQ_SCL_SCK input In SPI mode this is the SPI serial clock input (2.5 V LVCMOS, 10 to 20 MHz SPI clock frequency); in SMBus mode it is the SMBus clock input, which is open drain, needs an external 2 kΩ to 5 kΩ pull-up, and is 3.3 V LVCMOS tolerant.
4 OUT_CTRL_MOSI_SDA bidirectional In SPI mode this is the SPI master-output/slave-input data pin (MOSI, 2.5 V LVCMOS); in SMBus mode it is the open-drain SMBus data pin, which needs an external 2 kΩ to 5 kΩ pull-up and is 3.3 V LVCMOS tolerant.
5 RESERVED unconnected Reserved pin; no connect.
6 ENABLE input Four-level pin: 1 kΩ to VDD gives normal operation, 1 kΩ to GND powers down the device including signal detects and resets registers at power-up, and the float and 20 kΩ to GND states are reserved.
7 VDD power_in 2.5 V supply, 2.5 V ±5% (2.375 V to 2.625 V).
8 IN1+ input Non-inverting high-speed differential input for channel IN1, with an on-chip 100 Ω termination between IN1+ and IN1- and a required 4.7 µF AC coupling capacitor.
9 IN1- input Inverting high-speed differential input for channel IN1, with an on-chip 100 Ω termination between IN1+ and IN1- and a required 4.7 µF AC coupling capacitor.
10 VSS power_in Ground; connect directly to ground (GND).
11 IN0+ input Non-inverting high-speed differential input for channel IN0, with an on-chip 100 Ω termination between IN0+ and IN0- and a required 4.7 µF AC coupling capacitor.
12 IN0- input Inverting high-speed differential input for channel IN0, with an on-chip 100 Ω termination between IN0+ and IN0- and a required 4.7 µF AC coupling capacitor.
13 LOS_INT_N output Open-drain interrupt output that pulls low on loss of signal, eye-monitor threshold violation, or CDR lock change; it needs an external 4.7 kΩ pull-up and is 3.3 V LVCMOS tolerant.
14 RESERVED unconnected Reserved pin; no connect.
15 VOD_MISO_ADR1 output In SPI mode this is the SPI master-input/slave-output data pin (MISO, 2.5 V LVCMOS); in SMBus mode it is a four-level strap (ADDR1) that sets the SMBus address, read at power-up.
16 LOCK output 2.5 V LVCMOS output that is high when the CDR is locked and low when it is not locked.
17 RESERVED unconnected Reserved pin; no connect.
18 RESERVED unconnected Reserved pin; no connect.
19 OUT0- output Inverting 75 Ω CML output for channel OUT0, with an on-chip 75 Ω termination to VDD and a required 4.7 µF AC coupling capacitor.
20 OUT0+ output Non-inverting 75 Ω CML output for channel OUT0, with an on-chip 75 Ω termination to VDD and a required 4.7 µF AC coupling capacitor.
21 VDD power_in 2.5 V supply, 2.5 V ±5% (2.375 V to 2.625 V).
22 OUT1- output Inverting high-speed differential output for channel OUT1, with an on-chip 100 Ω termination between OUT1+ and OUT1- and a required 4.7 µF AC coupling capacitor.
23 OUT1+ output Non-inverting high-speed differential output for channel OUT1, with an on-chip 100 Ω termination between OUT1+ and OUT1- and a required 4.7 µF AC coupling capacitor.
24 VSS power_in Ground; connect directly to ground (GND).
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category RTC/Clock Chip
Pins 25

CAD (KiCad official)

  • Symbol: LMH0318RTWR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lmh0318rtwr-etched.step / lmh0318rtwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmh0318rtwr.step / lmh0318rtwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 fca0f5c3e991f0d7, retrieved 2026-10-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF