main
History Download
Ray Publish 0.1.0 b10a981

LM810M3-4.63

Texas Instruments · Monitors & Reset Circuits · SOT-23-3

LM810M3-4.63 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the device.
2 RESET output Active-high output that remains high while VCC is below the reset threshold and for 240 ms after VCC rises above it; the output is limited to VCC + 0.3 V maximum and 20 mA maximum output current.
3 VCC power_in Supply voltage input, specified at 1.2 V to 5.5 V over −40°C to 105°C (absolute maximum −0.3 V to 6 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VCC (TA = 0°C to 70°C) VCC 1 5.5 V TA = 0°C to 70°C 4
Input voltage range VCC (TA = -40°C to 105°C) VCC 1.2 5.5 V TA = -40°C to 105°C 4
Supply current ICC ICC 18 60 µA VCC < 5.5 V, LM8xx: 4.63, 4.38, 4.00; TA = -40°C to 85°C 4
Supply current ICC ICC 100 µA VCC < 5.5 V, LM8xx: 4.63, 4.38, 4.00; TA = 85°C to 105°C 4
Input supply voltage VCC -0.3 6 V 4
Output voltage RESET, RESET -0.3 V 4
Input current VCC 20 mA 4
Output current RESET, RESET 20 mA 4
Rate of rise VCC 100 V/µs 4
Continuous power dissipation 320 mW 4
Lead temperature 300 °C soldering, 10 s 4
Ambient temperature range TA -40 105 °C 4
Maximum junction temperature TJ(MAX) 125 °C 4
Storage temperature Tstg -65 160 °C 4
Reset threshold VTH (4.63 V version) VTH 4.56 4.63 4.7 V LM8xx: 4.63 V; TA = 25°C 5
Reset threshold VTH (4.63 V version) VTH 4.5 4.75 V LM8xx: 4.63 V; TA = -40°C to 85°C 5
Reset threshold VTH (4.63 V version) VTH 4.4 4.86 V LM8xx: 4.63 V; TA = 85°C to 105°C 5
Reset threshold tolerance VTH -3 3 % 4.63 V version, printed as 4.63 ± 3% (Table 1) 7
VCC to reset delay 20 µs VCC = VTH to (VTH, 100 mV) 5
Reset active timeout period 140 240 560 ms TA = -40°C to 85°C 5
Reset active timeout period 100 840 ms TA = 85°C to 105°C 5
RESET output voltage low (LM810) VOL 0.4 V VCC = VTH(max), ISINK = 3.2 mA, LM810: 4.63, 4.38, 4.00 5
Reset threshold temperature coefficient 30 ppm/°C 5
Junction-to-ambient thermal resistance RθJA 252 °C/W DBZ (SOT-23), 3 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 113.3 °C/W DBZ (SOT-23), 3 pins 4
Junction-to-board thermal resistance RθJB 53.5 °C/W DBZ (SOT-23), 3 pins 4
Junction-to-top characterization parameter ψJT 9.9 °C/W DBZ (SOT-23), 3 pins 4
Junction-to-board characterization parameter ψJB 52.6 °C/W DBZ (SOT-23), 3 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM810M3-4.63
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm810m3-4-63-etched.step / lm810m3-4-63-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm810m3-4-63.step / lm810m3-4-63.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 e95efdb789aa7ac6, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF