Generated by kicad-footprint-generator · KiCad file format 20260206
LM810M3-4.63
Texas Instruments · Monitors & Reset Circuits · SOT-23-3
LM810M3-4.63 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | RESET | output | Active-high output that remains high while VCC is below the reset threshold and for 240 ms after VCC rises above it; the output is limited to VCC + 0.3 V maximum and 20 mA maximum output current. |
| 3 | VCC | power_in | Supply voltage input, specified at 1.2 V to 5.5 V over −40°C to 105°C (absolute maximum −0.3 V to 6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range VCC (TA = 0°C to 70°C) | VCC | 1 | 5.5 | V | TA = 0°C to 70°C | 4 | |
| Input voltage range VCC (TA = -40°C to 105°C) | VCC | 1.2 | 5.5 | V | TA = -40°C to 105°C | 4 | |
| Supply current ICC | ICC | 18 | 60 | µA | VCC < 5.5 V, LM8xx: 4.63, 4.38, 4.00; TA = -40°C to 85°C | 4 | |
| Supply current ICC | ICC | 100 | µA | VCC < 5.5 V, LM8xx: 4.63, 4.38, 4.00; TA = 85°C to 105°C | 4 | ||
| Input supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Output voltage RESET, RESET | -0.3 | V | 4 | ||||
| Input current VCC | 20 | mA | 4 | ||||
| Output current RESET, RESET | 20 | mA | 4 | ||||
| Rate of rise VCC | 100 | V/µs | 4 | ||||
| Continuous power dissipation | 320 | mW | 4 | ||||
| Lead temperature | 300 | °C | soldering, 10 s | 4 | |||
| Ambient temperature range | TA | -40 | 105 | °C | 4 | ||
| Maximum junction temperature | TJ(MAX) | 125 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 160 | °C | 4 | ||
| Reset threshold VTH (4.63 V version) | VTH | 4.56 | 4.63 | 4.7 | V | LM8xx: 4.63 V; TA = 25°C | 5 |
| Reset threshold VTH (4.63 V version) | VTH | 4.5 | 4.75 | V | LM8xx: 4.63 V; TA = -40°C to 85°C | 5 | |
| Reset threshold VTH (4.63 V version) | VTH | 4.4 | 4.86 | V | LM8xx: 4.63 V; TA = 85°C to 105°C | 5 | |
| Reset threshold tolerance | VTH | -3 | 3 | % | 4.63 V version, printed as 4.63 ± 3% (Table 1) | 7 | |
| VCC to reset delay | 20 | µs | VCC = VTH to (VTH, 100 mV) | 5 | |||
| Reset active timeout period | 140 | 240 | 560 | ms | TA = -40°C to 85°C | 5 | |
| Reset active timeout period | 100 | 840 | ms | TA = 85°C to 105°C | 5 | ||
| RESET output voltage low (LM810) | VOL | 0.4 | V | VCC = VTH(max), ISINK = 3.2 mA, LM810: 4.63, 4.38, 4.00 | 5 | ||
| Reset threshold temperature coefficient | 30 | ppm/°C | 5 | ||||
| Junction-to-ambient thermal resistance | RθJA | 252 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 113.3 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 53.5 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 9.9 | °C/W | DBZ (SOT-23), 3 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 52.6 | °C/W | DBZ (SOT-23), 3 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM810M3-4.63 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm810m3-4-63-etched.step/lm810m3-4-63-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm810m3-4-63.step/lm810m3-4-63.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
e95efdb789aa7ac6, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).