main
Ray
Publish 0.1.0
16ee9e9
LM77CIMX-3
Texas Instruments · Temperature Sensors · SOIC-8
LM77CIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial bidirectional data line of the two-wire interface with an open-drain output, connected to the controller. |
| 2 | SCL | input | Serial bus clock input from the controller. |
| 3 | T_CRIT_A | output | Critical temperature alarm open-drain output, which needs a pull-up resistor and can go to a controller interrupt line or a system hardware shutdown. |
| 4 | GND | power_in | Power supply ground. |
| 5 | INT | output | Interrupt open-drain output that needs a pull-up resistor and connects to a controller interrupt line. |
| 6 | A1 | input | User-set address input, tied to ground (low, "0") or +VS (high, "1"). |
| 7 | A0 | input | User-set address input, tied to ground (low, "0") or +VS (high, "1"). |
| 8 | +VS | power_in | Positive supply voltage input, DC voltage from 3V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy | -1.5 | 1.5 | °C | TA = −10°C to +65°C | 4 | ||
| Accuracy | -2 | 2 | °C | TA = −25°C to +100°C | 4 | ||
| Accuracy | -3 | 3 | °C | TA = −55°C to +125°C | 4 | ||
| Supply Voltage Range | +VS | 3 | 5.5 | V | 3 | ||
| I2C Active Quiescent Current | IQ | 0.25 | 0.5 | mA | I2C Active | 4 | |
| Shutdown Mode Quiescent Current | IQ | 5 | 10 | μA | Shutdown Mode | 4 | |
| Temperature Conversion Time | 70 | 125 | ms | 4 | |||
| VIN(1) A0 and A1 Logical 1 Input Voltage | VIN(1) | 2 | V | A0 and A1 | 4 | ||
| VIN(0) A0 and A1 Logical 0 Input Voltage | VIN(0) | -0.3 | 0.8 | V | A0 and A1 | 4 | |
| VIN(0) SDA and SCL Logical 0 Input Voltage | VIN(0) | -0.3 | V | SDA and SCL | 4 | ||
| Logical 1 Input Current | IIN(1) | 0.005 | 1 | μA | VIN = + VS | 4 | |
| Logical 0 Input Current | IIN(0) | -0.005 | -1 | μA | VIN = 0V | 4 | |
| Logic 1 Output Leakage Current | IOH | 10 | μA | VOH = + VS | 4 | ||
| Low Level Output Voltage | VOL | 0.4 | V | IOL = 3 mA | 5 | ||
| T_CRIT_A Output Saturation Voltage | 0.8 | V | IOUT = 4.0 mA | 5 | |||
| Output Fall Time | tOF | 250 | ns | CL = 400 pF | 5 | ||
| SCL (Clock) Period | t1 | 2.5 | μs | 5 | |||
| Data in Set-Up Time to SCL High | t2 | 100 | ns | 5 | |||
| Data Out Stable after SCL Low | t3 | 0 | ns | 5 | |||
| SDA Low Set-Up Time to SCL Low (Start Condition) | t4 | 100 | ns | 5 | |||
| SDA High Hold Time after SCL High (Stop Condition) | t5 | 100 | ns | 5 | |||
| Supply Voltage | +VS | -0.3 | 6.5 | V | 3 | ||
| Voltage at any Pin | -0.3 | V | upper bound is (+VS + 0.3V) | 3 | |||
| Input Current at any Pin | 5 | mA | 3 | ||||
| Package Input Current | 20 | mA | 3 | ||||
| T_CRIT_A and INT Output Sink Current | 10 | mA | 3 | ||||
| T_CRIT_A and INT Output Voltage | 6.5 | V | 3 | ||||
| Storage Temperature | -65 | 125 | °C | 3 | |||
| ESD Susceptibility Human Body Model | 2500 | V | 100 pF discharged through 1.5 kΩ | 3 | |||
| ESD Susceptibility Machine Model | 250 | V | 200 pF discharged directly into each pin | 3 | |||
| Specified Temperature Range TMIN to TMAX | T | -55 | 125 | °C | 3 | ||
| Thermal Resistance Junction-to-Ambient (SOIC-8, D0008A) | θJA | 200 | °C/W | PCB with 2 oz. foil | 3 |
CAD (KiCad official)
- Symbol:
LM77CIMX-3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm77cimx-3-etched.step/lm77cimx-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm77cimx-3.step/lm77cimx-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
4447e865149efae0, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM77CIMX-3
**Texas Instruments** · Temperature Sensors · SOIC-8
LM77CIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial bidirectional data line of the two-wire interface with an open-drain output, connected to the controller. |
| 2 | SCL | input | Serial bus clock input from the controller. |
| 3 | T_CRIT_A | output | Critical temperature alarm open-drain output, which needs a pull-up resistor and can go to a controller interrupt line or a system hardware shutdown. |
| 4 | GND | power_in | Power supply ground. |
| 5 | INT | output | Interrupt open-drain output that needs a pull-up resistor and connects to a controller interrupt line. |
| 6 | A1 | input | User-set address input, tied to ground (low, "0") or +VS (high, "1"). |
| 7 | A0 | input | User-set address input, tied to ground (low, "0") or +VS (high, "1"). |
| 8 | +VS | power_in | Positive supply voltage input, DC voltage from 3V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy | | -1.5 | | 1.5 | °C | TA = −10°C to +65°C | 4 |
| Accuracy | | -2 | | 2 | °C | TA = −25°C to +100°C | 4 |
| Accuracy | | -3 | | 3 | °C | TA = −55°C to +125°C | 4 |
| Supply Voltage Range | +VS | 3 | | 5.5 | V | | 3 |
| I2C Active Quiescent Current | IQ | | 0.25 | 0.5 | mA | I2C Active | 4 |
| Shutdown Mode Quiescent Current | IQ | | 5 | 10 | μA | Shutdown Mode | 4 |
| Temperature Conversion Time | | | 70 | 125 | ms | | 4 |
| VIN(1) A0 and A1 Logical 1 Input Voltage | VIN(1) | 2 | | | V | A0 and A1 | 4 |
| VIN(0) A0 and A1 Logical 0 Input Voltage | VIN(0) | -0.3 | | 0.8 | V | A0 and A1 | 4 |
| VIN(0) SDA and SCL Logical 0 Input Voltage | VIN(0) | -0.3 | | | V | SDA and SCL | 4 |
| Logical 1 Input Current | IIN(1) | | 0.005 | 1 | μA | VIN = + VS | 4 |
| Logical 0 Input Current | IIN(0) | | -0.005 | -1 | μA | VIN = 0V | 4 |
| Logic 1 Output Leakage Current | IOH | | | 10 | μA | VOH = + VS | 4 |
| Low Level Output Voltage | VOL | | | 0.4 | V | IOL = 3 mA | 5 |
| T_CRIT_A Output Saturation Voltage | | | | 0.8 | V | IOUT = 4.0 mA | 5 |
| Output Fall Time | tOF | | | 250 | ns | CL = 400 pF | 5 |
| SCL (Clock) Period | t1 | 2.5 | | | μs | | 5 |
| Data in Set-Up Time to SCL High | t2 | 100 | | | ns | | 5 |
| Data Out Stable after SCL Low | t3 | 0 | | | ns | | 5 |
| SDA Low Set-Up Time to SCL Low (Start Condition) | t4 | 100 | | | ns | | 5 |
| SDA High Hold Time after SCL High (Stop Condition) | t5 | 100 | | | ns | | 5 |
| Supply Voltage | +VS | -0.3 | | 6.5 | V | | 3 |
| Voltage at any Pin | | -0.3 | | | V | upper bound is (+VS + 0.3V) | 3 |
| Input Current at any Pin | | | | 5 | mA | | 3 |
| Package Input Current | | | | 20 | mA | | 3 |
| T_CRIT_A and INT Output Sink Current | | | | 10 | mA | | 3 |
| T_CRIT_A and INT Output Voltage | | | | 6.5 | V | | 3 |
| Storage Temperature | | -65 | | 125 | °C | | 3 |
| ESD Susceptibility Human Body Model | | | | 2500 | V | 100 pF discharged through 1.5 kΩ | 3 |
| ESD Susceptibility Machine Model | | | | 250 | V | 200 pF discharged directly into each pin | 3 |
| Specified Temperature Range TMIN to TMAX | T | -55 | | 125 | °C | | 3 |
| Thermal Resistance Junction-to-Ambient (SOIC-8, D0008A) | θJA | | 200 | | °C/W | PCB with 2 oz. foil | 3 |
## CAD (KiCad official)
- Symbol: `LM77CIMX-3`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm77cimx-3-etched.step` / `lm77cimx-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm77cimx-3.step` / `lm77cimx-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm77.pdf) (28 pp, sha256 `4447e865149efae0`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm77cimx-3-datasheet.pdf)