Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM77CIMX-3

Texas Instruments · Temperature Sensors · SOIC-8

LM77CIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Serial bidirectional data line of the two-wire interface with an open-drain output, connected to the controller.
2 SCL input Serial bus clock input from the controller.
3 T_CRIT_A output Critical temperature alarm open-drain output, which needs a pull-up resistor and can go to a controller interrupt line or a system hardware shutdown.
4 GND power_in Power supply ground.
5 INT output Interrupt open-drain output that needs a pull-up resistor and connects to a controller interrupt line.
6 A1 input User-set address input, tied to ground (low, "0") or +VS (high, "1").
7 A0 input User-set address input, tied to ground (low, "0") or +VS (high, "1").
8 +VS power_in Positive supply voltage input, DC voltage from 3V to 5.5V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Accuracy -1.5 1.5 °C TA = −10°C to +65°C 4
Accuracy -2 2 °C TA = −25°C to +100°C 4
Accuracy -3 3 °C TA = −55°C to +125°C 4
Supply Voltage Range +VS 3 5.5 V 3
I2C Active Quiescent Current IQ 0.25 0.5 mA I2C Active 4
Shutdown Mode Quiescent Current IQ 5 10 μA Shutdown Mode 4
Temperature Conversion Time 70 125 ms 4
VIN(1) A0 and A1 Logical 1 Input Voltage VIN(1) 2 V A0 and A1 4
VIN(0) A0 and A1 Logical 0 Input Voltage VIN(0) -0.3 0.8 V A0 and A1 4
VIN(0) SDA and SCL Logical 0 Input Voltage VIN(0) -0.3 V SDA and SCL 4
Logical 1 Input Current IIN(1) 0.005 1 μA VIN = + VS 4
Logical 0 Input Current IIN(0) -0.005 -1 μA VIN = 0V 4
Logic 1 Output Leakage Current IOH 10 μA VOH = + VS 4
Low Level Output Voltage VOL 0.4 V IOL = 3 mA 5
T_CRIT_A Output Saturation Voltage 0.8 V IOUT = 4.0 mA 5
Output Fall Time tOF 250 ns CL = 400 pF 5
SCL (Clock) Period t1 2.5 μs 5
Data in Set-Up Time to SCL High t2 100 ns 5
Data Out Stable after SCL Low t3 0 ns 5
SDA Low Set-Up Time to SCL Low (Start Condition) t4 100 ns 5
SDA High Hold Time after SCL High (Stop Condition) t5 100 ns 5
Supply Voltage +VS -0.3 6.5 V 3
Voltage at any Pin -0.3 V upper bound is (+VS + 0.3V) 3
Input Current at any Pin 5 mA 3
Package Input Current 20 mA 3
T_CRIT_A and INT Output Sink Current 10 mA 3
T_CRIT_A and INT Output Voltage 6.5 V 3
Storage Temperature -65 125 °C 3
ESD Susceptibility Human Body Model 2500 V 100 pF discharged through 1.5 kΩ 3
ESD Susceptibility Machine Model 250 V 200 pF discharged directly into each pin 3
Specified Temperature Range TMIN to TMAX T -55 125 °C 3
Thermal Resistance Junction-to-Ambient (SOIC-8, D0008A) θJA 200 °C/W PCB with 2 oz. foil 3

CAD (KiCad official)

  • Symbol: LM77CIMX-3
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm77cimx-3-etched.step / lm77cimx-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm77cimx-3.step / lm77cimx-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 4447e865149efae0, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF