main
Ray
lm75bimx-3: laser-etched CAD + chip hero (factory 2.0.0 backfill)
5614431
LM75BIMX-3
Texas Instruments · Temperature and Humidity Sensor · SOIC-8
LM75BIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz. |
| 2 | SCL | input | I2C clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz. |
| 3 | O.S. | output | Over-temperature Shutdown alert output, open-drain (sink up to 10 mA). Requires an external pull-up resistor; asserts when the measured temperature crosses the programmable T_OS limit and releases at T_HYST. Polarity and fault-queue depth are configurable via the configuration register; typically wired to a controller interrupt line. |
| 4 | GND | power_in | Power supply ground / device reference. Connect to system ground. |
| 5 | A2 | input | User-set I2C address input bit A2. Tie to GND for logic 0 or to +VS for logic 1 to select one of eight I2C slave addresses (base address 0x48 = 1001_000x, offset by {A2,A1,A0}). |
| 6 | A1 | input | User-set I2C address input bit A1. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address. |
| 7 | A0 | input | User-set I2C address input bit A0. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address. |
| 8 | +VS | power_in | Positive supply voltage input, 3 V to 5.5 V (absolute maximum 6.5 V). Decouple with a 100-nF bypass capacitor near the pin plus ~10 µF of bulk capacitance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensor |
| Pins | 8 |
Ordering variants
LM75BIMX-3LM75BIMX-3/NOPBLM75BIMX-3LM75BIM-3LM75BIMX-3LM75BIM-3/NOPBLM75BIMX-3LM75BIMM-3LM75BIMX-3LM75BIMM-3/NOPBLM75BIMX-3LM75BIMMX-3/NOPB
CAD (KiCad official)
- Symbol:
LM75BIMX-3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm75bimx-3-etched.step/lm75bimx-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm75bimx-3.step/lm75bimx-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
e90d4c4df43371c0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM75BIMX-3
**Texas Instruments** · Temperature and Humidity Sensor · SOIC-8
LM75BIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz. |
| 2 | SCL | input | I2C clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz. |
| 3 | O.S. | output | Over-temperature Shutdown alert output, open-drain (sink up to 10 mA). Requires an external pull-up resistor; asserts when the measured temperature crosses the programmable T_OS limit and releases at T_HYST. Polarity and fault-queue depth are configurable via the configuration register; typically wired to a controller interrupt line. |
| 4 | GND | power_in | Power supply ground / device reference. Connect to system ground. |
| 5 | A2 | input | User-set I2C address input bit A2. Tie to GND for logic 0 or to +VS for logic 1 to select one of eight I2C slave addresses (base address 0x48 = 1001_000x, offset by {A2,A1,A0}). |
| 6 | A1 | input | User-set I2C address input bit A1. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address. |
| 7 | A0 | input | User-set I2C address input bit A0. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address. |
| 8 | +VS | power_in | Positive supply voltage input, 3 V to 5.5 V (absolute maximum 6.5 V). Decouple with a 100-nF bypass capacitor near the pin plus ~10 µF of bulk capacitance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensor |
| Pins | 8 |
## Ordering variants
- `LM75BIMX-3`
- `LM75BIMX-3/NOPB`
- `LM75BIMX-3LM75BIM-3`
- `LM75BIMX-3LM75BIM-3/NOPB`
- `LM75BIMX-3LM75BIMM-3`
- `LM75BIMX-3LM75BIMM-3/NOPB`
- `LM75BIMX-3LM75BIMMX-3/NOPB`
## CAD (KiCad official)
- Symbol: `LM75BIMX-3`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm75bimx-3-etched.step` / `lm75bimx-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm75bimx-3.step` / `lm75bimx-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm75bimx-3.pdf) (None pp, sha256 `e90d4c4df43371c0`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm75bimx-3-datasheet.pdf)