main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm75bimx-3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm75bimx-3: viewers · Ray
lm75bimx-3-etched.fit.json lm75bimx-3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm75bimx-3-etched.glb lm75bimx-3: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
lm75bimx-3-etched.step lm75bimx-3: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
lm75bimx-3.glb Publish 0.1.0 · Ray
lm75bimx-3.kicad_mod Publish 0.1.0 · Ray
lm75bimx-3.kicad_sym Publish 0.1.0 · Ray
lm75bimx-3.lbr Publish 0.1.0 · Ray
lm75bimx-3.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm75bimx-3: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
README.md lm75bimx-3: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM75BIMX-3

Texas Instruments · Temperature and Humidity Sensor · SOIC-8

LM75BIMX-3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz.
2 SCL input I2C clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz.
3 O.S. output Over-temperature Shutdown alert output, open-drain (sink up to 10 mA). Requires an external pull-up resistor; asserts when the measured temperature crosses the programmable T_OS limit and releases at T_HYST. Polarity and fault-queue depth are configurable via the configuration register; typically wired to a controller interrupt line.
4 GND power_in Power supply ground / device reference. Connect to system ground.
5 A2 input User-set I2C address input bit A2. Tie to GND for logic 0 or to +VS for logic 1 to select one of eight I2C slave addresses (base address 0x48 = 1001_000x, offset by {A2,A1,A0}).
6 A1 input User-set I2C address input bit A1. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address.
7 A0 input User-set I2C address input bit A0. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address.
8 +VS power_in Positive supply voltage input, 3 V to 5.5 V (absolute maximum 6.5 V). Decouple with a 100-nF bypass capacitor near the pin plus ~10 µF of bulk capacitance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Sensor
Pins 8

Ordering variants

  • LM75BIMX-3
  • LM75BIMX-3/NOPB
  • LM75BIMX-3LM75BIM-3
  • LM75BIMX-3LM75BIM-3/NOPB
  • LM75BIMX-3LM75BIMM-3
  • LM75BIMX-3LM75BIMM-3/NOPB
  • LM75BIMX-3LM75BIMMX-3/NOPB

CAD (KiCad official)

  • Symbol: LM75BIMX-3
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm75bimx-3-etched.step / lm75bimx-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm75bimx-3.step / lm75bimx-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 e90d4c4df43371c0, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF