Generated by kicad-footprint-generator · KiCad file format 20260206
LM75BDP-HXY
HXY MOSFET · Temperature Sensors · MSOP-8
LM75BDP-HXY from HXY MOSFET, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | I2C serial interface data line; if the bus has no pull-up resistors fitted, about 10 kΩ pull-ups must be added on SDA and SCL. |
| 2 | SCL | input | I2C serial interface clock line, driven by the controller; if the bus has no pull-up resistors fitted, about 10 kΩ pull-ups must be added on SDA and SCL. |
| 3 | OS | output | Overtemperature alert output that follows the temperature register against the programmed TOS and THYS thresholds, with output mode and polarity set by the status register. |
| 4 | GND | power_in | Chip ground. |
| 5 | A2 | input | I2C physical address bit 2, set by tying to GND or VCC; the pin must not be left floating. |
| 6 | A1 | input | I2C physical address bit 1, set by tying to GND or VCC; the pin must not be left floating. |
| 7 | A0 | input | I2C physical address bit 0, set by tying to GND or VCC; the pin must not be left floating. |
| 8 | VCC | power_in | Chip supply; operating range 2.8 V to 5.5 V, absolute maximum -0.3 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | MSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC 工作电压 | VCC | -0.3 | 6 | V | 3 | ||
| VI 输入电压 | VI | -0.3 | 6 | V | 所有输入管脚 | 3 | |
| II 输入电流 | II | -5 | 5 | mA | 所有输入管脚 | 3 | |
| IO(sink) 方向输出电流 | IO(sink) | 10 | mA | OS 管脚 | 3 | ||
| VO 输出电压 | VO | -0.3 | 6 | V | OS 管脚 | 3 | |
| TSTG 存储温度 | TSTG | -65 | 150 | ℃ | 3 | ||
| TJ 结温 | TJ | 150 | ℃ | 3 | |||
| VCC 工作电压 | VCC | 2.8 | 3.3 | 5.5 | V | 3 | |
| VI 环境温度 | VI | -55 | 125 | ℃ | 3 | ||
| TACC 温度检测精度 | TACC | -2 | 2 | ℃ | TA=﹣25℃~+100℃ | 3 | |
| TACC 温度检测精度 | TACC | -3 | 3 | ℃ | TA=﹣55℃~+125℃ | 3 | |
| VIL 输入低电平 | VIL | -0.3 | V | 数字管脚 SCL,SDA,A2,A1,A0 | 4 | ||
| IDD(AV) 平均工作电流 | IDD(AV) | 100 | 200 | uA | 正常工作,I2C 待机 | 4 | |
| IDD(AV) 平均工作电流 | IDD(AV) | 300 | uA | 正常工作,I2C 激活 FSCL=400kHz | 4 | ||
| IDD(AV) 平均工作电流 | IDD(AV) | 0.2 | 1 | uA | 关断模式 | 4 | |
| IIH 高电平输入电流 | IIH | -1 | 1 | μA | 数字管脚 VI=VCC | 4 | |
| IIL 低电平输入电流 | IIL | -1 | 1 | μA | 数字管脚 VI=0V | 4 | |
| VOL 输出低电平 | VOL | 0.4 | V | SDA,OS 管脚;IOL=3mA | 4 | ||
| VOL 输出低电平 | VOL | 0.8 | V | SDA,OS 管脚; IOL=4mA | 4 | ||
| ILO 输出漏电 | ILO | 10 | μA | SDA,OS 管脚;VOH=VCC | 4 | ||
| NFAULT 错误序列 过热检测可编程错误数量 | NFAULT | 1 | 6 | 4 | |||
| FSCL SCL 时钟频率 | FSCL | 0.02 | 400 | kHz | 见图 3 | 4 | |
| tHIGH SCL 高电平宽度 | tHIGH | 0.6 | us | 4 | |||
| tLOW SCL 低电平宽度 | tLOW | 1.3 | us | 4 | |||
| tHD;STA START 保持时间 | tHD;STA | 100 | ns | 4 | |||
| tSU;DAT 数据建立时间 | tSU;DAT | 100 | ns | 5 | |||
| tHD;DAT 数据保持时间 | tHD;DAT | 0 | ns | 5 | |||
| tSU;STO STOP 建立时间 | tSU;STO | 100 | ns | 5 | |||
| tTO 超时时间 | tTO | 75 | 200 | ms | 5 | ||
| TRES 温度分辨率 | TRES | 0.125 | ℃ | 11-bit 温度数据 | 3 | ||
| TCONV(T) 温度转换时间 | TCONV(T) | 10 | ms | 正常工作模式 | 3 | ||
| TCONV 温度转换周期 | TCONV | 100 | ms | 正常工作模式 | 3 | ||
| VI(HYS) 输入迟滞电压 | VI(HYS) | 300 | mV | SCL,SDA 管脚 | 4 | ||
| VI(HYS) 输入迟滞电压 | VI(HYS) | 150 | mV | A2,A1,A0 管脚 | 4 | ||
| TTH(OTS) 过热检测温度 | TTH(OTS) | 80 | ℃ | 系统默认 | 4 | ||
| THYS 迟滞温度 | THYS | 75 | ℃ | 系统默认 | 4 | ||
| CI 输入电容 | CI | 20 | pF | 数字管脚 | 4 | ||
| tF 下降时间 | tF | 250 | ns | SDA,OS 输出; CL=400pF;IOL=3mA | 5 |
CAD (KiCad official)
- Symbol:
LM75BDP-HXY - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm75bdp-hxy-etched.step/lm75bdp-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm75bdp-hxy.step/lm75bdp-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (15 pp, sha256
87f4f0ec29ff3c2d, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).