Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM75BDP-HXY

HXY MOSFET · Temperature Sensors · MSOP-8

LM75BDP-HXY from HXY MOSFET, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional I2C serial interface data line; if the bus has no pull-up resistors fitted, about 10 kΩ pull-ups must be added on SDA and SCL.
2 SCL input I2C serial interface clock line, driven by the controller; if the bus has no pull-up resistors fitted, about 10 kΩ pull-ups must be added on SDA and SCL.
3 OS output Overtemperature alert output that follows the temperature register against the programmed TOS and THYS thresholds, with output mode and polarity set by the status register.
4 GND power_in Chip ground.
5 A2 input I2C physical address bit 2, set by tying to GND or VCC; the pin must not be left floating.
6 A1 input I2C physical address bit 1, set by tying to GND or VCC; the pin must not be left floating.
7 A0 input I2C physical address bit 0, set by tying to GND or VCC; the pin must not be left floating.
8 VCC power_in Chip supply; operating range 2.8 V to 5.5 V, absolute maximum -0.3 V to 6 V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package MSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC 工作电压 VCC -0.3 6 V 3
VI 输入电压 VI -0.3 6 V 所有输入管脚 3
II 输入电流 II -5 5 mA 所有输入管脚 3
IO(sink) 方向输出电流 IO(sink) 10 mA OS 管脚 3
VO 输出电压 VO -0.3 6 V OS 管脚 3
TSTG 存储温度 TSTG -65 150 ℃ 3
TJ 结温 TJ 150 ℃ 3
VCC 工作电压 VCC 2.8 3.3 5.5 V 3
VI 环境温度 VI -55 125 ℃ 3
TACC 温度检测精度 TACC -2 2 ℃ TA=﹣25℃~+100℃ 3
TACC 温度检测精度 TACC -3 3 ℃ TA=﹣55℃~+125℃ 3
VIL 输入低电平 VIL -0.3 V 数字管脚 SCL,SDA,A2,A1,A0 4
IDD(AV) 平均工作电流 IDD(AV) 100 200 uA 正常工作,I2C 待机 4
IDD(AV) 平均工作电流 IDD(AV) 300 uA 正常工作,I2C 激活 FSCL=400kHz 4
IDD(AV) 平均工作电流 IDD(AV) 0.2 1 uA 关断模式 4
IIH 高电平输入电流 IIH -1 1 μA 数字管脚 VI=VCC 4
IIL 低电平输入电流 IIL -1 1 μA 数字管脚 VI=0V 4
VOL 输出低电平 VOL 0.4 V SDA,OS 管脚;IOL=3mA 4
VOL 输出低电平 VOL 0.8 V SDA,OS 管脚; IOL=4mA 4
ILO 输出漏电 ILO 10 μA SDA,OS 管脚;VOH=VCC 4
NFAULT 错误序列 过热检测可编程错误数量 NFAULT 1 6 4
FSCL SCL 时钟频率 FSCL 0.02 400 kHz 见图 3 4
tHIGH SCL 高电平宽度 tHIGH 0.6 us 4
tLOW SCL 低电平宽度 tLOW 1.3 us 4
tHD;STA START 保持时间 tHD;STA 100 ns 4
tSU;DAT 数据建立时间 tSU;DAT 100 ns 5
tHD;DAT 数据保持时间 tHD;DAT 0 ns 5
tSU;STO STOP 建立时间 tSU;STO 100 ns 5
tTO 超时时间 tTO 75 200 ms 5
TRES 温度分辨率 TRES 0.125 ℃ 11-bit 温度数据 3
TCONV(T) 温度转换时间 TCONV(T) 10 ms 正常工作模式 3
TCONV 温度转换周期 TCONV 100 ms 正常工作模式 3
VI(HYS) 输入迟滞电压 VI(HYS) 300 mV SCL,SDA 管脚 4
VI(HYS) 输入迟滞电压 VI(HYS) 150 mV A2,A1,A0 管脚 4
TTH(OTS) 过热检测温度 TTH(OTS) 80 ℃ 系统默认 4
THYS 迟滞温度 THYS 75 ℃ 系统默认 4
CI 输入电容 CI 20 pF 数字管脚 4
tF 下降时间 tF 250 ns SDA,OS 输出; CL=400pF;IOL=3mA 5

CAD (KiCad official)

  • Symbol: LM75BDP-HXY
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm75bdp-hxy-etched.step / lm75bdp-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm75bdp-hxy.step / lm75bdp-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (15 pp, sha256 87f4f0ec29ff3c2d, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF