main
Ray
lm75aimmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
1268bf9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198
{
"schema_version": 1,
"type": "component",
"slug": "lm75aimmx",
"title": "LM75AIMMX",
"brief": "Texas Instruments Temperature and Humidity Sensor, VSSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensor",
"lm75aimmx"
],
"component": {
"mpn": "LM75AIMMX",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8",
"pin_count": 8,
"category": "Sensor",
"subcategory": "Temperature and Humidity Sensor",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2303010430_Texas-Instruments-LM75AIMMX-NOPB_C2868680.pdf",
"parts": {
"symbol": "lm75aimmx.kicad_sym",
"footprint": "lm75aimmx.kicad_mod",
"model_3d": "lm75aimmx-etched.glb",
"model_3d_plain": "lm75aimmx.glb",
"model_3d_step": "lm75aimmx-etched.step",
"model_3d_step_plain": "lm75aimmx.step",
"lbr": "lm75aimmx.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "SDA",
"type": "bidirectional",
"description": "I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Compatible with I2C bus speeds up to 400 kHz."
},
{
"number": "2",
"name": "SCL",
"type": "input",
"description": "I2C serial clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Input logic levels are referenced to +VS (VIH = 0.7·VS, VIL = 0.3·VS)."
},
{
"number": "3",
"name": "O.S.",
"type": "output",
"description": "Over-temperature shutdown open-drain output. Asserts (active low) when the measured temperature exceeds the programmed TOS limit; behavior is comparator or interrupt mode per the Configuration register. Sink capability up to 10 mA; connect a pull-up resistor to the host interrupt line and it may be wire-OR'd with other O.S. outputs."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Power supply ground reference for the device. Connect to the system ground plane."
},
{
"number": "5",
"name": "A2",
"type": "input",
"description": "User-set I2C address input bit 2. Tie to GND for logic '0' or to +VS for logic '1' to select one of eight possible slave addresses on the shared 2-wire bus."
},
{
"number": "6",
"name": "A1",
"type": "input",
"description": "User-set I2C address input bit 1. Tie to GND for logic '0' or to +VS for logic '1' to select the slave address."
},
{
"number": "7",
"name": "A0",
"type": "input",
"description": "User-set I2C address input bit 0 (LSB). Tie to GND for logic '0' or to +VS for logic '1' to select the slave address."
},
{
"number": "8",
"name": "+VS",
"type": "power_in",
"description": "Positive supply voltage input, 2.7 V to 5.5 V. Bypass locally with a 100 nF ceramic capacitor mounted close to the pin, plus 10 µF bulk capacitance in the near vicinity. Typical operating current is 280 µA (4 µA in shutdown)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2303010430_Texas-Instruments-LM75AIMMX-NOPB_C2868680.pdf",
"pages": 31,
"sha256": "852d26dc7c785da0",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm75aimmx.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm75aimmx-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.1,
2,
0.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f70f1cc798b401d3b11804501be9a060c39aadff5b6ffbe69ab808f7653e6c64",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VSSOP-8",
"Category": "Sensor",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lm75aimmx"
],
"discovery_pitch": "LM75AIMMX (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm75aimmx.kicad_sym",
"lm75aimmx.kicad_mod",
"lm75aimmx.glb",
"lm75aimmx.step",
"lm75aimmx.lbr",
"docs/hero.png",
"docs/lm75aimmx-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm75aimmx-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "LM75AIMMX",
"kind": "packaging"
},
{
"mpn": "LM75AIMMXIMX",
"kind": "packaging"
}
],
"updated_at": "2026-09-28T17:08:08.007Z"
}