main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm75aimmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm75aimmx: viewers · Ray
lm75aimmx-etched.fit.json lm75aimmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm75aimmx-etched.glb lm75aimmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm75aimmx-etched.step lm75aimmx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm75aimmx.glb Publish 0.1.0 · Ray
lm75aimmx.kicad_mod Publish 0.1.0 · Ray
lm75aimmx.kicad_sym Publish 0.1.0 · Ray
lm75aimmx.lbr Publish 0.1.0 · Ray
lm75aimmx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm75aimmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm75aimmx: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM75AIMMX

Texas Instruments · Temperature and Humidity Sensor · VSSOP-8

LM75AIMMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Compatible with I2C bus speeds up to 400 kHz.
2 SCL input I2C serial clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Input logic levels are referenced to +VS (VIH = 0.7·VS, VIL = 0.3·VS).
3 O.S. output Over-temperature shutdown open-drain output. Asserts (active low) when the measured temperature exceeds the programmed TOS limit; behavior is comparator or interrupt mode per the Configuration register. Sink capability up to 10 mA; connect a pull-up resistor to the host interrupt line and it may be wire-OR'd with other O.S. outputs.
4 GND power_in Power supply ground reference for the device. Connect to the system ground plane.
5 A2 input User-set I2C address input bit 2. Tie to GND for logic '0' or to +VS for logic '1' to select one of eight possible slave addresses on the shared 2-wire bus.
6 A1 input User-set I2C address input bit 1. Tie to GND for logic '0' or to +VS for logic '1' to select the slave address.
7 A0 input User-set I2C address input bit 0 (LSB). Tie to GND for logic '0' or to +VS for logic '1' to select the slave address.
8 +VS power_in Positive supply voltage input, 2.7 V to 5.5 V. Bypass locally with a 100 nF ceramic capacitor mounted close to the pin, plus 10 µF bulk capacitance in the near vicinity. Typical operating current is 280 µA (4 µA in shutdown).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Sensor
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM75AIMMX
  • LM75AIMMXIMX

CAD (KiCad official)

  • Symbol: LM75AIMMX
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm75aimmx-etched.step / lm75aimmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm75aimmx.step / lm75aimmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 852d26dc7c785da0, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF